Voice Fax Network
 |
US $34.95
Do I Have To Keep My Fax Line When I Switch To Voip?
Most offices used to have a dedicated analog fax machine, connected to a separate phone line, often located in a central location such as a copy room. Since it was obviously impractical for each employee to have his or her own fax machine, this served a valuable purpose. However, this approach has limitations. It becomes necessary for employees to physically go to the fax room to send or receive a fax, which takes additional time. But more importantly, sensitive information becomes vulnerable. When a sensitive fax is received, it is received in a public area, and could be vulnerable to snooping.
If you have moved to a VoIP environment, you may need to switch to a new fax environment as well. raditional analog fax machines do not work well over VoIP, because of different signaling mechanisms. Sending a fax via analog fax machine over a VoIP line can be done, although there is likely to be a loss of quality due to the inherent packet loss of the system, and in most customer-facing environments, this is unacceptable. You can certainly choose to bypass your VoIP system and attach your analog fax machine to a PSTN phone line. Alternately, it is possible to attach a VoIP gateway to a fax machine, to allow the fax to be sent over the VoIP network. This however, is an incomplete and inelegant solution that does not take full advantage of the additional features offered by VoIP.
Voice over Internet Protocol (VoIP) presents an alternative, which is much more efficient and private. Fax-over-IP is a more modern alternative. VoIP allows for many features to be incorporated into the phone system that are not possible over an analog system, and digital faxing is one such feature. There are two basic options for sending a fax over your VoIP system. A larger company may wish to have its own fax server, which functions as a sending and receiving engine, and routes incoming faxes to each employee's desktop. A smaller company on the other hand, can make use of a digital fax service.
An Internet fax service typically charges a low monthly rate, with a certain number of free faxes each month with an incremental charge for additional ones. No dedicated telephone line or hardware is required. In most cases, faxing can be done through a simple web interface, and most services support multiple file formats, including PDF and TIFF. The document to be faxed can be sent directly from the desktop computer; or alternately, if it is a paper document that is not available in digital format, it can be easily scanned into the system so that it can be sent out as a TIFF file.
There are numerous advantages to running faxes through the VoIP system through either a fax service or an on-premises fax server, not the least of which is the fact that it is no longer necessary for employees to leave their desks to send or receive one. In addition, most fax software allows for integration with common desktop productivity applications, so for example, a document created in Microsoft Word could be faxed directly from the Word interface. Also, common problems with analog fax machines, such as paper jams and other types of malfunctions, are eliminated.
About the Author
"Pankaj Modi Says:" If you have moved to a VoIP environment, you may need to switch to a new fax environment as well. Voice over Internet Protocol (VoIP) presents an alternative, which is much more efficient and private. For more information visit: http://www.theofficephone.com
|
|
Cisco Voice/Fax Network Module $641.99 1312760 Hour 2 x Voice Interface Card (VIC) 32°F (0°C) to 104°F (40°C) 5% to 85% Operating 90 Limited 2-slot Cisco IP Communications voice/fax network module Can support up to 2 VIC Voice Channel Capacity: 6 any complexity or 8 medium complexity Cisco 2600XM Series Cisco 2691 Cisco 3600 Series Cisco 3700 Series Requires at least one Cisco VIC Cisco Cisco Systems, Inc Data Networking FCC Class B MGCP NM-HD-2V= Network Module Not Included SIP VoIP Voice/Fax Network Module www.cisco.com |
|
|
Cisco Two-slot IP Communications Voice/Fax Network Module NMHD2V $685.25 Cisco Two-slot IP Communications Voice/Fax Network Module NMHD2V |
|
|
Cisco 60 Channel T1/E1 Voice/Fax Network Module 2-Ports NMHDV2E160= $6084.43 Cisco 60 Channel T1/E1 Voice/Fax Network Module 2-Ports NMHDV2E160= |
|
|
Cisco Digital T1/E1 Packet Voice Trunk Network Module Voice/Fax NMHDV2E160 $2404.23 Cisco Digital T1/E1 Packet Voice Trunk Network Module Voice/Fax NMHDV2E160 |
|
|
High Density VoiceFax Network Module - voice / fax module - FXO $922.99 Cisco High Density VoiceFax Network Module - Voice / fax module - plug-in module - expansion slot - FXO / 6 analog port(s) - for Cisco 28XX 28XX V3PN 29XX 38XX 38XX V3PN |
|
|
VoIP Voice and Fax Signal Processing $136 A complete and systematic treatment of signal processing for VoIP voice and fax This book presents a consolidated view and basic approach to signal processing for VoIP voice and fax solutions. It provides readers with complete coverage of the topic, from how things work in voice and fax modules, to signal processing aspects, implementation, and testing. Beginning with an overview of VoIP infrastructure, interfaces, and signals, the book systematically covers: Voice compression Packet loss concealment techniques DTMF detection, generation, and rejection Wideband voice modules operation VoIP Voice-Network bit rate calculations VoIP voice testing Fax over IP and modem over IP Country deviations of PSTN mapped to VoIP VoIP on different processors and architectures Generic VAD-CNG for waveform codecs Echo cancellation Caller ID features in VoIP Packetization—RTP, RTCP, and jitter buffer Clock sources for VoIP applications Fax operation on PSTN, modulations, and fax messages Fax over IP payload formats and bit rate calculations Voice packets jitter with large data packets VoIP voice quality Over 100 questions and answers on voice and more than seventy questions and answers on fax are provided at the back of the book to reinforce the topics covered throughout the text. Additionally, several clarification, interpretation, and discussion sections are included in selected chapters to aide in readers' comprehension. VoIP Voice and Fax Signal Processing is an indispensable resource for professional electrical engineers, voice and fax solution developers, product and deployment support teams, quality assurance and test engineers, and computer engineers. It also serves as a valuable textbook for graduate-level students in electrical engineering and computer engineering courses. |
|
|
IP Unified Communications Voice/Fax Network Module - voice interface card - FXO $622.99 Cisco IP Unified Communications Voice/Fax Network Module - Voice interface card - plug-in module - FXO / 4 analog port(s) - for Cisco 17XX 26XX 28XX 29XX 36XX 37XX 3845 |
|
|
Cisco IP Communications High-Density Digital Voice/Fax Network Module NM-HDV2-1T1/E1 $1159.85 Cisco IP Communications High-Density Digital Voice/Fax Network Module NM-HDV2-1T1/E1 |
|
|
Cisco High-Density Analog Voice/Fax Network Module With Four FXS Ports (Spare) NMHDA4FXS $1227.65 Cisco High-Density Analog Voice/Fax Network Module With Four FXS Ports (Spare) NMHDA4FXS |
|
|
Cisco IP Communications High-Density Digital Voice/Fax Network Module NMHDV22T1E $1481.53 Cisco IP Communications High-Density Digital Voice/Fax Network Module NMHDV22T1E |
|
|
Cisco IP Communications High-Density Digital Voice/Fax 1x VIC/VWIC Network Module NM-HDV2= NMHDV2 $721.93 Cisco IP Communications High-Density Digital Voice/Fax 1x VIC/VWIC Network Module NM-HDV2= NMHDV2 |
|
|
Cisco Digital Voice/Fax Trunk Network Module 1.54Mbps T1 24 Channels NMHDV1T124= $2982.2 Cisco Digital Voice/Fax Trunk Network Module 1.54Mbps T1 24 Channels NMHDV1T124= |
|
|
Cisco - Nm-Hd-2Ve= - Cisco Voice/Fax Network Module - 2 X Expansion Slot - Network Module $1737.27 The Cisco Ip Communications Voice/fax Network Modules Provide Enterprises, Managed Service Providers, And Service Providers The Ability To Directly Connect The Public Switched Telephone Network (pstn) And Traditional Telephony Equipment (private Branch Exchange [pbx], Key System, Analog Telephones, Fax Machines, Etc.) To Existing Cisco 2600xm Series, Cisco 2691, 3640, And 3660, And Cisco 3700 Series Voice Gateway Routers. This Set Of Cisco Ip Communications Voice/fax Network Modules Delivers The Most Versatile Combination Of Analog And Digital Voice And Data Capabilities In A Single Network Module [850001] UPC: 746320823294 UNSPC: 43222600 15.5L x 10.2W x 3.25H 1.95 LB |
|
|
Cisco Voice / Fax Module. Each $351.24 Manufacturer: Cisco Systems, Inc. Each. Cisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network m |
|
|
Cisco - Nm-Hd-1V= - Cisco Voice/Fax Network Module - 1 X Voice Interface Card (Vic) - Network Module $443.78 The Cisco Ip Communications Voice/fax Network Module For The Cisco 2600xm Series, Cisco 2691, And Cisco 3600 And 3700 Series Voice Gateway Routers Enable Packet Voice Technologies Including Voip (h.323, Media Gateway Control Protocol (mgcp), And Session Initiation Protocol (sip)), Voice Over Frame Relay, And Voice Over Atm (atm Adaptation Layer 2 (aal2) And Aal5). supports Up To Four Channels Of Analog/bri Voice Using Any Supported Coder-decoder (codec). (no Support For T1/e1 Or Data Wan.) [849998] UPC: 746320823355 UNSPC: 43222600 16L x 10.5W x 3.5H 2 LB 0.31 Cubes |
|
|
Cisco 64-channel Packet Fax/Voice DSP Module $2021.99 -13°F (-25°C) to 158°F (70°C) Storage 32°F (0°C) to 104°F (40°C) Operating 4 x Digital Signal Processor 5% to 85% Non-condensing Relative Humidity Operating 5% to 95% Non-condensing Relative Humidity Non-operating 64 x Channel 64-channel Packet Fax/Voice DSP Module 90 Limited IP Plus images and higher This module use with NM-HDV2 network module only Supported Platforms and IOS Requirements: 2600XM - 12.3(7)T 2691 - 12.3(7)T 3700 - 12.3(7)T Memory Requirements for Supported Platforms: 2600XM: 64 MB DRAM 32 MB Flash 2691: 128 MB DRAM 32 MB Flash 3700: 128 MB DRAM 32 MB Flash Max Channels for High Complexity : 24 Max Channels for Medium Complexity : 32 Range of Channels for Flexi Complexity : 24 - 64 High-complexity vocoders supported: G.711, G.726, G.729, G.723.1, G.728, GSM-EFR and Fax Relay Medium-complexity vocoders supported: G.711, G.726, G.729a, GSM and Fax Relay Flexi vocoders supported: G.711, G.726, G.729, G.723.1, G.728, and Fax Relay (number of channels depends on codec selected). NM-HDV2 NM-HDV2-1T1/E1 NM-HDV2-2T1/E1 Platforms Supported: 2600XM series 2691 3700 3660 3640 3631 ITU Standard Voice Codecs: G.711 G.726 G.729 G.723.1 G.728 G.729a G.723.1 GSM GSM-EFR PVDM2 Packet Fax/Voice DSP module used with IP Communications High-Density Digital Voice/Fax Network Module. The DSPs on the PVDM2s can be shared across multiple IP Communications High-Density Digital Voice/Fax Network Modules installed on a voice gateway router. Cisco Cisco Systems, Inc PVDM PVDM2-64 Voice www.cisco.com |
|
|
Cisco - Pvdm2-64= - Cisco 64-Channel Packet Fax/Voice Dsp Module - Pvdm $2105.55 pvdm2 Packet Fax/voice Dsp Module Used With Ip Communications High-density Digital Voice/fax Network Module. The Dsps On The Pvdm2s Can Be Shared Across Multiple Ip Communications High-density Digital Voice/fax Network Modules Installed On A Voice Gateway Router. [D79579] UPC: 746320860213 UNSPC: 43222600 7.25L x 4.25W x 2.15H 0.2 LB |
|
|
Cisco - Pvdm2-64 - Cisco 64-Channel Packet Fax/Voice Dsp Module - Pvdm $2105.55 pvdm2 Packet Fax/voice Dsp Module Used With IP Communications High-density Digital Voice/fax Network Module. The Dsps on The Pvdm2s Can be Shared Across Multiple IP Communications High-density Digital Voice/fax Network Modules Installed on a Voice Gateway Router. [CK5001] UPC: 746320860213 UNSPC: 43222600 1 LB 1 Cubes |
|
|
Cisco - Pvdm2-32= - Cisco 32-Channel Packet Fax/Voice Dsp Module - Pvdm $1060.65 pvdm2 Packet Fax/voice Dsp Module Used With Ip Communications High-density Digital Voice/fax Network Module. The Dsps On The Pvdm2s Can Be Shared Across Multiple Ip Communications High-density Digital Voice/fax Network Modules Installed On A Voice Gateway Router. [D68650] UPC: 746320860190 UNSPC: 43222600 7L x 4W x 2H 0.2 LB 0.03 Cubes |
|
|
Cisco Voice / Fax Module - Plug-in Module (32 Channels). Each $1191.07 Manufacturer: Cisco Systems, Inc. Each. The IP Communications High-Density Digital Voice/Fax Network Modules are used with the new PVDM2 Packet Fax/Voice DSP modules, providing scalability from 4 to 120 channels and featuring the latest digital signal pro |
|
|
Cisco IP Communications High-Density Digital Voice/Fax Network Module $2018.99 -13°F (-25°C) to 158°F (70°C) Storage 1 x VIC/VWIC 1.54 Mbps 1.54 Mbps T1 2 2 x T1/E1 WAN 2.05 Mbps 2.05 Mbps E1 32°F (0°C) to 104°F (40°C) Operating 5% to 85% Non-condensing Relative Humidity Operating 5% to 95% Non-condensing Relative Humidity Non-operating 90 Limited AL LP CD EN PVDM 0 PVDM 1 PVDM 2 PVDM 3 Cisco Voice Manager SNMP protocol compliant Manageable via a MIB browser CiscoView interface for configuration ConfigMaker NetSys supported FCC Class B device EMC 47CFR15 Subpart B 2002, T1 Safety IEC60950 Telecom 47 CFR part 68, TIA/EIA 968-A Network module contain four 80-pin SIMM sockets for PVDM2s Toll Bypass Support Telephony Interface Signaling Support Cisco SRST maintains basic telephony services at the branch office even if Wan goes down NM-HDV2-2T1/E1 with VIC2-4FXS/DID in VIC/VWIC slot. Enables FXS connectivity to analog phones/fax machines and 2 T1 digital trunk access the PSTN and WAN access. This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls Support for 4 to 120 channels with the new PVDM2 and featuring the latest digital signal processing technology The module is Interoperable with the full range of Cisco IP Communications solutions T1 Network Interface: Line Code: AMI, B8ZS AMI Ones Density: Enforced for N x 56 Kbps Channels Framing Format: D4 (SF) and ESF Output level (LBO): 0, -7.5, or -15 dB Input Level: +1dB0 down to -24 dB0 DTE Interface (WIC mode): Fractional Service DTE Interface (VIC mode): G.704/Structured DCE Interface: G.704/Structured E1 Network Interface: Data Rate: 1.984 Mbps (framed mode) Per E1 Port Clocking: Internal and Loop (recovered from network) E1 National Bits: Fixed (non-configurable) Encoding: HDB3 DTE Interface (WIC mode): Fractional Service DTE Interface (VIC mode): G.704/Structured DCE Interface: G.704/Structured Software and Memory Requirements: Cisco 2600XM: IP Plus images and higher 64 MB DRAM 32 MB Flash Cisco 2691: IP Plus images and higher 128 MB DRAM 32 MB Flash Cisco 3700: IP Plus images and higher 128 MB DRAM 32 MB Flash Supported Platforms & Minimum IOS Versions: 3845 - 12.3(11)T 3825 - 12.3(11)T 3745 - 12.3(7)T 3725 - 12.3(7)T 2691 - 12.3(7)T 2600XM Series - 12.3(7)T Supported Platforms: 3845 3825 3745 3725 2691 2600XM Series |
|
|
Cisco 16-channels Packet Fax/Voice DSP Module $516.99 -13°F (-25°C) to 158°F (70°C) Storage 1 x Digital Signal Processor 16 x Channel 16-channels Packet Fax/Voice DSP Module 32°F (0°C) to 104°F (40°C) Operating 5% to 85% Non-condensing Relative Humidity Operating 5% to 95% Non-condensing Relative Humidity Non-operating 90 Limited Max Channels for High Complexity : 6 Max Channels for Medium Complexity : 8 Range of Channels for Flexi Complexity : 6 - 16 High-complexity vocoders supported: G.711, G.726, G.729, G.723.1, G.728, GSM-EFR and Fax Relay Medium-complexity vocoders supported: G.711, G.726, G.729a, GSM and Fax Relay Flexi vocoders supported: G.711, G.726, G.729, G.723.1, G.728, and Fax Relay (number of channels depends on codec selected). NM-HDV2 NM-HDV2-1T1/E1 NM-HDV2-2T1/E1 Platforms Supported: 2600XM series 2691 3700 PVDM2 socket This module use with NM-HDV2 network module only Supported Platforms and IOS Requirements: 2600XM - 12.3(7)T 2691 - 12.3(7)T 3700 - 12.3(7)T Memory Requirements for Supported Platforms: 2600XM: 64 MB DRAM 32 MB Flash 2691: 128 MB DRAM 32 MB Flash 3700: 128 MB DRAM 32 MB Flash ITU Standard Voice Codecs: G.711 G.726 G.729 G.723.1 G.728 G.729a G.723.1 GSM GSM-EFR This new PVDM2 SIMM can be configured for high-, medium- or flex complexity via software. Flex complexity is the default configuration, and in this mode, the network module will dynamically negotiate the appropriate codec (medium or high) on a call-by-call basis. In addition, the DSPs on the PVDM2s can be shared across multiple IP Communications High-Density Digital Voice/Fax Network Modules installed on a Multiservice AccessRouter. Cisco Cisco Systems, Inc PVDM PVDM2-16 Voice www.cisco.com |
|
|
Cisco PVDM216= 16Channel Packet Voice/Fax DS $882.33 This new PVDM2 SIMM can be configured for high medium or flex complexity via software Flex complexity is the default configuration and in this mode the network module will dynamically negotiate the appropriate codec (medium or high) on a callbycall basis In addition the DSPs on the PVDM2s can be shared across multiple IP Communications HighDensity Digital Voice/Fax Network Modules installed on a Multiservice AccessRouter . Application/Usage: Voice. Type: PVDM. Compatibility: NMHDV2 NMHDV21T1/E1 NMHDV22T1/E1. Platforms Supported: 2600XM series 2691 3700. Interfaces/Ports Details: 16 x Channel. Processor: 1 x Digital Signal Processor. Certifications and Standards: ITU Standard Voice Codecs: G 711 G 726 G 729 G 723 1 G 728 GSM GSMEFR. Humidity: 5 to 85 Noncondensing Relative Humidity Operating 5 to 95 Noncondensing Relative Humidity Nonoperating. Temperature: 32F (0C) to 104F (40C) Operating 13F (25C) to 158F (70C) Storage. Additional Information: Max Channels for High Complexity: 6 Max Channels for Medium Complexity: 8 Range of Channels for Flexi Complexity: 6 16 Highcomplexity vocoders supported: G 711 G 726 G 729 G 723 1 G 728 GSMEFR and Fax Relay Mediumcomplexity vocoders supported: G 711 G 726 G 729a GSM and Fax Relay Flexi vocoders supported: G 711 G 726 G 729 G 723 1 G 728 and Fax Relay (number of channels depends on codec selected) . System Requirements: PVDM2 socket This module use with NMHDV2 network module only; Supported Platforms and IOS Requirements: 2600XM 12 3(7)T 2691 12 3(7)T 3700 12 3(7)T Memory Requirements for Supported Platforms: 2600XM: 64 MB DRAM 32 MB Flash 2691: 128 MB DRAM 32 MB Flash 3700: 128 MB DRAM m32 MB Flash. |
|
|
Cisco High Density VoiceFax Network Module - Voice / Fax Module - FXS/FXO. Each $1064.02 Manufacturer: Cisco Systems, Inc. Each. This 3-port FXS and 4-port FXO voice and fax expansion module provides on-premises FXS signaling to connect directly to a standard telephone, fax machine, or similar device and supplies ring, voltage, and dial tone. |
|
|
Cisco - Nm-Hdv2= - Cisco Ip Communications High-Density Digital Voice/Fax Network Module - 1 X Vic/Vwic - Network Module $1087.86 network Modules Provide Enterprises, Managed Service Providers, And Service Providers With The Ability To Directly Connect The Public Switched Telephone Network (pstn), Traditional Telephony Equipment Such As Private Branch Exchange (pbx), Key Systems, Analog Telephones, And Fax Machines. Supports A Vic/vwic Slot That Can Be Populated With Either Digital Or Analog/bri Voice/wan Interface Card. Supports A Maximum Of 60 Channels Of Digital Voice, Or Four Channels Of Analog Voice In Medium Complexity Codec. Must Be Used With Up To Four Pvdm2 Packet Fax/voice Dsp Modules. [480972] UPC: 746320832111 UNSPC: 43222600 15.8L x 10.4W x 3.3H 1.85 LB 0.32 Cubes |
|
|
Cisco PVDM232= 32 Channel Packet Voice/Fax DS $1764.6 The IP Communications HighDensity Digital Voice/Fax Network Modules are used with the new PVDM2 Packet Fax/Voice DSP modules providing scalability from 4 to 120 channels and featuring the latest digital signal processing technology. A maximum of four PVDM2s can be installed on each NMHDV2 network module. Enterprises can conveniently select the minimum number and densitytype PVDM2s depending on the voice channels they are deploying and scale the number of PVDMs as they expand. These new PVDM2 SIMMs can be configured for high medium or flex complexity via software. Flex complexity is the default configuration and in this mode the network module will dynamically negotiate the appropriate codec (medium or high) on a callbycall basis depending on the PVDM2s available. In addition the DSPs on the PVDM2s can be shared across multiple IP Communications HighDensity Digital Voice/Fax Network Modules installed on a Multiservice AccessRouter. Device Type: Voice / fax module. Enclosure Type: Plugin module. Data Compression Protocol: G.711. System Requirements: Cisco IOS 12.3(7)T. |
|
|
Cisco - Pvdm2-16= - Cisco 16-Channels Packet Fax/Voice Dsp Module - Pvdm $532.71 this New Pvdm2 Simm Can Be Configured For High-, Medium- Or Flex Complexity Via Software. Flex Complexity Is The Default Configuration, And In This Mode, The Network Module Will Dynamically Negotiate The Appropriate Codec (medium Or High) On A Call-by-call Basis. In Addition, The Dsps On The Pvdm2s Can Be Shared Across Multiple Ip Communications High-density Digital Voice/fax Network Modules Installed On A Multiservice Accessrouter. [PVDM216] UPC: 746320860176 UNSPC: 43222600 7L x 4W x 2H 0.3 LB 0.03 Cubes |
|
|
Cisco - Pvdm2-48= - Cisco 48-Channel Packet Fax/Voice Dsp Module - Pvdm $1586.77 this New Pvdm2 Simm Can Be Configured For High, Medium Or Flex Complexity Via Software. Flex Complexity Is The Default Configuration, And In This Mode, The Network Module Will Dynamically Negotiate The Appropriate Codec (medium Or High) On A Call-by-call Basis. In Addition, The Dsps On The Pvdm2s Can Be Shared Across Multiple Ip Communications High-density Digital Voice/fax Network Modules Installed On A Multiservice Access Router. [D68881] UPC: 746320860206 UNSPC: 43222600 7.25L x 4W x 2H 0.2 LB 0.03 Cubes |
|
|
Fax $105.14 High Quality Content by WIKIPEDIA articles Fax is a telecommunications technology used to transfer copies (facsimiles) of documents, especially using affordable devices operating over the telephone network. The word telefax, short for telefacsimile, for make a copy at a distance, is also used as a synonym. Although fax is not an acronym (as it is abbreviated from facsimile), it is often written as FAX. The device is also known as a telecopier in certain industries. When sending documents to people at large distances, faxes have a distinct advantage over postal mail in that the delivery is nearly instantaneous, yet its disadvantages in quality have relegated it to a position beneath email as the prevailing form of electronic document transfer except where the legal status of a sent fax and its accompanying sending report are desired. Author: Miller, Frederic P./ Vandome, Agnes F./ McBrewster, John Binding Type: Paperback Number of Pages: 138 Publication Date: 2009/12/15 Language: English Dimensions: 5.98 x 9.01 x 0.32 inches |
|
|
Perle PCI-RAS4 V.92 Universal 3.3/5v Data/Fax/Voice Modem $728.99 04001904 12140 ft Maximum Operating 14.40 Kbps Fax 33.60 Kbps Fax 4 x RJ-11 4.50" Height x 8" Width 5 to 90% Operating 50°F (10°C) to 113°F (45°C) Operating 56 56 Kbps Data Maximum Auto answer, auto call detection Remote configuration for centralized setup and management Software controlled hardware reset for each modem to ensure the modems all operate efficiently and error free. TI 16c 754 enhanced UARTs with 64 by e FIFOs minimized server load Hardware Flow Control for data integrity to deliver centralized high bandwidth fax transmission or receipt of applications. SCO OpenServer UnixWare Windows 95 Windows 98 SunSoft Solaris Linux Windows 2000 Windows NT4.0 Perle V.92 PCI-RAS multi-modem card deliver multiple voice, fax and 56 Kbps data modem ports for either Windows or UNIX/Linux operating systems. PCI-RAS card also provide simple Internet connection and secure access for connecting remote users to the office network. Perle PCI-RAS card are designed to meet small office users' data, fax and voice communications requirements. Telecommuters, remote sales force and after-hours workers can all connect, cost effectively and securely. Used with fax server software,they can be used to deliver centralized high bandwidth fax transmission or receipt. Bell 103 Bell 212A Class 1 Class 2.1 Data/Fax/Voice Modem Group 3 ITU V.17 ITU-T V.21 ITU-T V.22 ITU-T V.22bis ITU-T V.27ter ITU-T V.32bis ITU-T V.33 ITU-T V.34 ITU-T V.34bis ITU-T V.42 ITU-T V.42bis ITU-T V.90 ITU-T V.92 Internal K56flex Lifetime Limited MNP-2 MNP-3 MNP-4 MNP-5 PCI PCI-RAS4 V.92 Universal 3.3/5v Data/Fax/Voice Modem Perle Perle Systems, Inc www.perle.com |
|
|
Brooktrout® TR1034 +P4-4L-R - Voice/fax Board - Plug-in Card - PCI / 4 Analog Port(s). Each $2607.43 Manufacturer: Cantata Technology, Inc. Each. Brooktrout Technology is the market leader in intelligent fax technology, having pioneered the network fax market in 1987. The TR1034 series is the latest generation of intelligent fax boards from Brooktrout Te |
|
|
Brooktrout® TR1034 +P8-8L-R - Voice/fax Board - Plug-in Card - PCI - 33.6 Kbps / 8 Analog Port(s). Each $5316.03 Manufacturer: Cantata Technology, Inc. Each. Brooktrout Technology is the market leader in intelligent fax technology, having pioneered the network fax market in 1987. The TR1034 series is the latest generation of intelligent fax boards from Brooktrout Te |
|
|
Cisco 8-channels Packet Fax/Voice DSP Expansion Module $260.99 -13°F (-25°C) to 158°F (70°C) Storage 1 x Digital Signal Processor 32°F (0°C) to 104°F (40°C) Operating 5% to 85% Non-condensing Relative Humidity Operating 5% to 95% Non-condensing Relative Humidity Non-operating 8 x Channel 8-channels Packet Fax/Voice DSP Expansion Module 90 Limited Max Channels for High Complexity : 4 Max Channels for Medium Complexity : 4 Range of Channels for Flexi Complexity : 4 - 8 High-complexity vocoders supported: G.711, G.726, G.729, G.723.1, G.728, GSM-EFR and Fax Relay Medium-complexity vocoders supported: G.711, G.726, G.729a, GSM and Fax Relay Flexi vocoders supported: G.711, G.726, G.729, G.723.1, G.728, and Fax Relay (number of channels depends on codec selected). NM-HDV2 NM-HDV2-1T1/E1 NM-HDV2-2T1/E1 Platforms Supported: 2600XM series 2691 3700 PVDM2 socket IP Plus images and higher This module use with NM-HDV2 network module only Supported Platforms and IOS Requirements: 2600XM - 12.3(7)T 2691 - 12.3(7)T 3700 - 12.3(7)T Memory Requirements for Supported Platforms: 2600XM: 64 MB DRAM 32 MB Flash 2691: 128 MB DRAM 32 MB Flash 3700: 128 MB DRAM 32 MB Flash ITU Standard Voice Codecs: G.711 G.726 G.729 G.723.1 G.728 G.729a G.723.1 GSM GSM-EFR This new PVDM2 SIMM can be configured for high-, medium- or flex complexity via software. Flex complexity is the default configuration, and in this mode, the network module will dynamically negotiate the appropriate codec (medium or high) on a call-by-call basis. In addition, the DSPs on the PVDM2s can be shared across multiple IP Communications High-Density Digital Voice/Fax Network Modules installed on a Multiservice AccessRouter. Cisco Cisco Systems, Inc PVDM PVDM2-8 Voice www.cisco.com |
|
|
voice / fax module $1600 Cisco - Voice / fax module - plug-in module ( 48 channels) - for Cisco 26XX 28XX 29XX 37XX 3845 V3PN 38XX 39XX |