Standard Shelf Steel

Steel channels are used to mount, brace, support

Basic strut steel channel comes in the open box section, 1 5/8 by 1 5/8 inch square cross section. A half height (1 5/8 inch wide, 13/16 inch tall) cross section version is also available, used mostly where mounted directly to a wall as it has significantly less stiffness and ability to carry loads across an open space or brace. A deep channel 2 7/16 inches tall and 1 5/8 inch wide is also manufactured.

The material used to form the C steel channel is typically 12 gauge (0.1046 inch) or 14 gauge (0.0747 inch) thick sheet metal.Several variations are available with different hole patterns for mounting to walls and supports. Solid channel has no holes predrilled, and must either be drilled on site or mounted in another fashion. Punched channel has round holes, large enough for 5/8 inch threaded steel rod or bolts, punched in the top of the channel at regular 1 7/8 inch centers. Half-slot channel has short, rounded end rectangular slots punched out on 2 inch centers. Slot channel has longer slots on 4 inch centers.

In addition, shapes are manufactured with two lengths of channel welded together back to back, or three or four welded together in various patterns, to form stronger structural elements.An overhead electrical wire hanger manufactured from two lengths of strut channels and two lengths of threaded rod.A length of standard half-slotted strut channel used as a brace, connected to a length of half-channel mounted directly to a wall, joined with a purpose-built channel connecting steel angle.A shelf supporting electrical conduit and pipe, manufactured from strut channel

Steel channels are used to mount, brace, support, and connect lightweight structural loads in building construction. These include pipes, electrical and data wire, mechanical systems such as ventilation, air conditioning, and other mechanical systems. Strut channel is also used for other applications that require a strong framework, such as workbenches, shelving systems, equipment racks, etc.

 

source:news njwanze

About the Author

Steel channels

Phoenix Stainless Steel Side Shelf $23 This Phoenix Side Shelf features stainless steel construction and convenient utensil holders. Phoenix grills come standard with one side shelf.

TRIPP LITE SRSHELF4PSL SmartRack Standard Sliding Shelf $159.99 Features: Sliding Shelf mountable rack accessory Designed for 4 post rack mounting 16 inch shelf depth, supports up to 50 lbs. Extendible shelf accomodates tower units, monitors, and other equipment Cold rolled steel with black finish Required mounting hardware included

Raxxess Standard Rack Utility Shelf 1 Space $26.99 16-gauge cold-rolled steel shelf allows the rackmounting of otherwise non-rackmountable equipment. One-piece construction. Finished in durable black baked enamel.

Raxxess Standard Rack Utility Shelf 2 Space $29.95 16-gauge cold-rolled steel shelf allows the rackmounting of otherwise non-rackmountable equipment. One-piece construction. Finished in durable black baked enamel.

Gator Standard Sliding Shelf 1U, 13.8 Deep $74.99 Smooth-sliding rack-mountable shelf for any number of applications. This shelf is equipped with vents that allow heat to dissipate from electronic devices such as wireless receivers, or they can be used to secure components to the shelf.Cold rolled 16 gauge steel constructionBlack powder coated finishRear flanged for rigidityElongated vent holes for optimum air circulationSliding vented 1U shelf

American Standard M9224020070A Shelf Support $37.04 Shelf Support.

Brushed Stainless Steel Shower Shelf $114 Brushed Stainless Steel Shower Shelf

Hammered Steel Wall Shelf With Half Circle $288 This hammered steel wall shelf with half circle rack is the perfect solution for your kitchen storage. The half circle gives you depth for large pots, while the long bar has ample space for all your utensils and cookware. The wall brackets adjust for easy mounting and accommodates standard 1" x 4" shelving (not included) to hold supplies. It includes twelve angled hooks and two 4� wall brackets.

Chief PAC-102B Accessory Shelf $59.99 1.42" 10" 14" 20 lb PAC-102B Accessory Shelf Shelf cover Mounting hardware VCR DVD Optional safety strap for added security The PAC-102B quickly installs to standard 1.5" (38 mm) NPT extensions columns and includes all necessary plasma TV installation hardware. Black Chief Chief Manufacturing PAC-102B PAC-102B Accessory Shelf PAC102B Pole Mount Steel www.chiefmfg.com

LKPSE3021SS Work Shelf For Stainless Steel $251 Elkay LKPSE3021SS Work Shelf For Stainless Steel Sink

Innovation Standard Rack Mount Shelf $124.99 1U 1USHL-112-20 20" Depth Innovation Innovation First, Inc Rack Shelf Standard Rack Mount Shelf www.racksolutions.com

Stainless Steel Two Shelf $78.99 RANGE KLEEN CW6004R TWO SHELF WALL-MOUNT POT RACK (STAINLESS STEEL)

KB21-31S Shelf Grid - Stainless $79.5 Shelf Gridin Stainless Steel

Gator 1U 15 Deep Vented Shelf $50 Utility Shelf, 15" Deep; 1U; w/ Elongated Vent Holes for Air Circulation /The 1U Vented Rack Shelf from Gator is an accessory that was designed to be installed in a standard 19" rack. It enables you to add a storage shelf to a rack. Air passageways have been cut into its 16 gauge steel to help keep your equipment ventilated. The steel used to construct this shelf has been cold rolled to give it additional strength. The rear of the shelf is flanged for added rigidity. It has a black powder coated finish.

Gator 2U 15 Deep Vented Shelf $49.99 Utility Shelf; 15" Deep; 2U; w/ Elongated Vent Holes for Air Circulation / The 2U Vented Rack Shelf from Gator is an accessory that was designed to be installed in a standard 19 rack. It enables you to add a storage shelf to a rack. Air passageways have been cut into its 16 gauge steel to help keep your equipment ventilated. The steel used to construct this shelf has been cold rolled to give it additional strength. The rear of the shelf is flanged for added rigidity

Fellowes / STANDARD MONITOR RISER/SHELF UP / 91712 $27.45 Fellowes - STANDARD MONITOR RISER/SHELF UP - 91712

Raxxess Standard Rack Utility Shelf 2 Space $29.95 Raxxess Standard Rack Utility Shelf 2 Space

Raxxess Standard Rack Utility Shelf 1 Space $26.99 Raxxess Standard Rack Utility Shelf 1 Space

Tripp Lite STANDARD SLIDING SHELF SRSHELF4PSL $196.04 Tripp Lite STANDARD SLIDING SHELF SRSHELF4PSL

APC STANDARD DUTY SLIDING SHELF BLACK AR8123BLK $218.93 APC STANDARD DUTY SLIDING SHELF BLACK AR8123BLK

Zen Standard Shelf Kit $71 With an Asian flare this simple and clean Zen shelf is must for any office looking for an eastern feel. Combined with its chrome clips and soft maple like color this shelf will give a strong yet understated presence. Shelf is 32" long by 10" deep with a maple finish. Clips are chrome in color with a modern square design.

Polished Stainless Steel Bath Shelf $98 Polished Stainless Steel Bath Shelf -Mounting brackets are adjustable.

Gator 1U 13.8 Deep Sliding Utility Shelf $69.99 Sliding Shelf; 13.8" Deep; 1U / The 1U Vented Sliding Rack Shelf from Gator is an accessory that was designed to be installed in a standard 19 rack. It enables you to add a storage shelf to a rack. Air passageways have been cut into its 16 gauge steel to help keep your equipment ventilated. The shelf conveniently slides out giving you easy access to hidden equipment or it can be used as a pull-out workspace. The steel used to construct this shelf has been cold rolled to give it additional strength. The rear of the shelf is flanged for added rigidity.

Startech RK42SLF Fixed Shelf for racks $75.36 The RK42SLF is a universal shelf. RK4242BK series of cabinets or virtually any industry standard 42in depth 19 rack with side mounting options. Coldrolled steel construction. Slots preserve airflow inside the rack. Color: Black. Mounting: Side (front and rear). Dimension: 1.85 H x 33.86 L x 18.9 W.

Safco Industrial Steel Shelf $98.99 0% 1 1 Carton 36" Width x 12" Depth x 85.50" Height 5250 6 725 lb Store and organize parts and supplies in this 85-1/2" industrial steel shelving unit. Ideal for shop, warehouse and supply rooms. The extra-strong, box-shelf beam supports front sides for increased shelf capacity. Heavy-duty steel shelving is designed for demanding storage needs. Box beam shelf design and double-sided compression clips support heavy loads up to 725 lb. per shelf based on a load evenly distributed. Shelves are ribbed to provide additional strength and minimize shelf deflection. Shelves lock in place but are easily repositioned in 1" increments. One universal post kit must be used with each shelf pack and is sold separately. The kit includes four 85-1/2" high offset angle posts, two pairs of side braces and one pair of back braces. Dark Gray GREENGUARD Industrial Steel Shelf No Safco Safco Products Shelf Steel Yes www.safcoproducts.com

Quartet™ SingleSided One Shelf Steel Garment Rack, 36w x 181/2d x 611/2h, Black. Each $251.9 Manufacturer: Acco. Each. Single-Sided, One-Shelf Garment Rack Perforated shelves for garment ventilation. 3" standard hanger spacing. Adjustable leveling glides. Powder coated textured steel. Perforated top storage shelf. Hangers not included. Black. 18-

This entry was posted on Saturday, November 27th, 2010 at 1:58 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.