Singlemode Simplex Fiber

What are fiber optic patch cables?

Fiber patch cable is a cable terminated with optic connectors on both ends. It has two major application areas: computer work station to outlet and fiber optic patch panels or optical cross connect distribution center.

Common types

Fiber patch cables can be categorized to different groups based on optical fiber mode, fiber cable type, termination types, connector polishing styles and fiber cable sizes.

Optical Fiber Mode

1. Single mode

Single mode fiber patch cables use 9/125 micron bulk single mode cable and single mode connectors at both ends. Single mode fiber cable jacket color is usually yellow.

2. Multimode

Multimode fiber patch cables use 62.5/125 micron or 50/125 micron cable and are terminated with multimode optic connectors at both ends. The cable jacket is usually orange.

3. 10gig multimode fiber patch cables

10Gig multimode fibers are specially designed 50/125 micron fiber optimized for 850nm VCSEL laser based 10Gig Ethernet. They are backward compatible with existing network equipment and provide close to three times the bandwidth of traditional 62.5/125 multimode fibers. 10 Gigabit is rated for distances up to 300 meters using 850nm Vertical Cavity Surface Emitting Lasers (VCSEL). The cable jacket is usually aqua.

Fiber Cable Type

1. Simplex

Simplex fiber patch cable has one fiber and one connector on each end.

2. Duplex

Duplex fiber patch cable has two fibers and two connectors on each end. Each fiber is marked "A" or "B" or different colored connector boots are used to mark polarity.

3. Ribbon fan-out cable assembly

For ribbon fan-out cable assembly, one end is ribbon fiber with multi fibers and one ribbon fiber connector such as MTP connector (12 fibers), the other end is multi simplex fiber cables with connectors such as ST, SC, LC, etc.

Termination Types

1. Same connector types

This fiber patch cable has the same type of connector on both ends, such as ST, SC, LC, FC, etc.

2. Hybrid connector types

This fiber patch cable has different connectors on each end. One end can be SC and the other end can be LC, ST, FC, etc.

Connector Polishing Styles

Fiber optic connectors are designed and polished to different shapes to minimize back reflection. This is particularly important in single mode applications. Typical back reflection grades are -30dB, -40dB, -50dB and -60dB.

1. PC (Physical Contact)

Typical back reflection Fiber Cable Sizes

You can choose your fiber cable jacket size for your particular application.

1. 250um bare fiber

2. 900um tight buffer fiber

3. 1.6mm fiber cable

4. 2.0mm fiber cable

5. 3.0mm fiber cable

Popular fiber patch cables on the market

1. LC

2. ST

3. SC and SC/APC

4. FC and FC/APC

5. MTRJ

6. E2000

7. VF-45

Special Types

1. Polarization maintaining fiber patch cables

2. Mode conditioning fiber patch cables (also called mode conditioning patch cord, mode conditioning cables)

3. Pre-terminated pigtail

Cleaning methods

1. Reel connector cleaner

2. Isopropyl alcohol and lint-free wipes

3. Duster

4. Swab cleaner

Cautions for handling fiber optic cables

1. Bend radius:

2. Kink

3. Tie-wrap

Want to know more about FTTH? Find out more about these Fiber optic patch cables, fiber optic patch cords, fiber optic patch panels on Fiber Optics For Sale Co web site!

Tripplite N455000S Duplex Singlemode Fiber Couple $30.93 This coupler provides a simple and easy way to link together two Singlemode fiber optic cables with LC connectors. Can be used with duplex or simplex cable assemblies. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Dual LC female connectors For 8.3/125 or 9/125 Singlemode fiber System Requirements Two Singlemode Fiber Optic cables with LC type connectors Package Includes Duplex LC to LC Singlemode fiber optic coupler

37114 - 2M Lc St Simplex Singlemode Fiber $24.66 [2045169] UPC: 757120371144 UNSPC: 26121607 13L x 5.7W x 1.3H 0.05 LB 1 Cubes

Cables To Go / 2M LC SC SIMPLEX SINGLEMODE / 37109 $24.11 Cables To Go - 2M LC SC SIMPLEX SINGLEMODE - 37109

Cables To Go 1m LC LC Simplex 9/125 Singlemode Fiber $34.91 Costeffective solution that provides high bandwidth and transmission rates over longer distances. With LC to LC termination this highquality fiber optic patch cable is specificially designed for gigabit ethernet applications. The patented injection molding process provides each connection greater durability in resisting pulls strains and impacts from cabling installs.Each cable is 100 optically inspected and tested for insertion loss before you receive it. A pullproof jacket design surrounds the popular 9/125 single mode fiber immune to electrical interference. LC Connector Dimensions: 4.5mm H x 4.5mm W x 50mm D. Maximum Connector Loss: 0.50 dB. Typical Connector Loss: 0.30 dB. Typical Return Loss: 55 dB. Buffer Material: PVC. Buffer OD: 900 m. Jacket Material: PVC (OFNR riserrated). Jacket OD: 1.8 mm. Installation Tensile Load: 100 N (445 lbs). LongTerm Tensile Load: 50 N (222 lbs). Maximum Tensile Load: 100 N/cm. Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97 ). LongTerm (Unloaded) Minimum Bend Radius: 3.0cm (1.2 ). Crush Resistance: 750 N/cm. Impact Resistance: 1 000 cycles. Flex Resistance: 5 000 cycles. Attenuation at 1550 nm: 0.25 dB/km. Attenuation at 1310 nm: 0.35 dB/km. Operating Temperature: 20C to +70C. Color: Yellow. Length: 3m.

Cables To Go 33437 3m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE RED $28.2 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37129 2m SCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.44 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34709 6m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $29.81 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34711 8m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $30.63 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34854 10m SCSC PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $42.2 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Ideal for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Ideal for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34807 30m LCLC PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $78.08 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Ideal for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Ideal for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34718 7m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $39.48 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34855 15m SCSC PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $46.97 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Ideal for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Ideal for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34708 4m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $28.78 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34715 30m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $44.01 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34717 6m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $38.68 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37926 2m LCST PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $40.68 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37108 1m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $26.94 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37111 5m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $29.29 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37112 10m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $31.25 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37118 1m STST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $26.94 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: ST to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37928 5m LCST PLENUMRATED SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $43.3 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37120 3m STST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.2 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: ST to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37109 2m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $27.59 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37128 1m SCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.26 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37110 3m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.2 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37130 3m SCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $28.78 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37103 1m LCLC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $33.7 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37115 3m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $35.04 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37107 10m LCLC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $39.81 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34713 15m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $35.26 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37131 5m SCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $30.21 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: SC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 34721 15m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE YELLOW $46.75 Get the performance you demand at a price that makes sense with 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37113 1m LCST SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE $33.28 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Lifetime warranty against defects of materials and workmanship. Connectors: LC to ST. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Yellow. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37677 3m STSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE RED $39.61 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37693 5m LCST PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE GREEN $43.3 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles

Cables To Go 37719 10m LCSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE RED $46.83 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: SC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37704 10m LCSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE BLACK $46.83 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: SC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Black. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37729 10m LCLC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE BLUE $51.58 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37685 1m LCST PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE BLUE $39.38 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Blue. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

Cables To Go 37716 2m LCSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE RED $36.44 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: SC to LC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available.

This entry was posted on Saturday, March 1st, 2008 at 10:36 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.