Sata Ide Ata
 |
US $7.09
SATA hard drive: Physical damage and recovery services
<!-- @page { margin: 2cm } P { margin-bottom: 0.21cm } -->
SATA (Serial Advanced Technology Attachment) hard drives have quickly achieved a new standard in the hard drive technology market, thanks to fast and efficient data transfer rates (as compared to ATA) and hot swapping. Despite many advantages, you cannot overlook the fact that a SATA hard drive can also suffer damage, just like all other mechanical hard disk drives fail.
In physical failure scenarios, a SATA hard drive won't be detected by a system and, in addition, you might also receive different error messages. Since hard drive failure leads to data inaccessibility, you must recover lost data from a healthy backup. If you encounter a SATA hard disk failure when there is no backup available, do not worry and switch off the system immediately. You can recover data if you get in touch with experts proficient in delivering data recovery services.
SATA hard drive failure is just another type of failure. Data loss resulting from this failure can be easily compensated by availing hard drive recovery services. To acquire such professional services in New Jersey is not a big deal. The place is renowned for hosting various industries, and data recovery industry has a great scope here due to the presence of various corporate houses. Data recovery services in NJ can be obtained in case of a hard drive failure, irrespective of the interface (IDE, EIDE, SATA, SCSI, SAS) and brand (Western Digital, Maxtor, Seagate, IBM).
Let's consider a practical scenario to understand SATA hard drive failure in a better way. Imagine, you have a computer with SATA hard drive. One fine day, when you start it, you might get the following error message:
"SATA Primary Hard Disk Drive 0 Failure - Strike F1 to continue F2 to run the setup utility."
Cause
The above error can be witnessed if any of the following conditions:
-
Due to faulty SATA cables
-
If the motherboard is faulty
-
If the BIOS settings are not set correctly
-
Or if the SATA hard drive is physically damaged
Resolution
You can follow the below-mentioned steps to eliminate the problem:
-
Check all the hard drive cables are in a good state and properly connected
-
If the motherboard is damaged, it is essential to replace it
-
Verify BIOS settings and restore them to original yet correct settings
-
In case of physical failure, there is no option but to replace the damaged hard drive and avail data recovery services.
Hard drive recovery engineers have rich experience in handling a variety of hard drive failures, and seeking their assistance is a must if you want to recover the vital data.
If you are looking for reliable, efficient and cost-effective data recovery services in New Jersey, then your only preference should be Stellar Data Recovery Inc. With CLASS 100 Clean Rooms and state-of-the-art facilities, the company is a renowned name in the data recovery industry and provides customized solutions for hard drive recovery, RAID recovery, Windows recovery, E-mail recovery etc. Hard drive recovery engineers at Stellar have carried out several successful recoveries, thus providing a major reprieve to its thousands of clients.
About the Author
Hello everyone. I am a software analyst and I write reviews about the data recovery software and data recovery services being provided in New york
|
|
SATA-IDE Bilateral Converter Board $6.59 - IDE To SATA & SATA To IDE Adapter Bilateral - Supports ATA 100/133- Compatible with Serial ATA specification |
|
|
IDE to SATA Serial ATA HD Power Cable connector $30.32 IDE to SATA Serial ATA HD Power Cable connector Sata power cable sata 15p power cable ide to sata cable |
|
|
SATA-to-IDE Adapter - storage controller - SATA-150 - Ultra ATA 133 $19.99 SIIG SATA-to-IDE Adapter - Storage controller - SATA-150 - Ultra ATA 133 |
|
|
IDE ULTRA ATA 100/133 to SATA Converter Adapter $11.99 Features: This Converter works to converts parallel ATA to SATAIt features One 40 pin IDE port, One Serial ATA port, One 4pin power connectorThe IDE to SATA Converter is designed to connect this converter to your motherboard IDE portSATA Converter spports ATA 100/133HD Driver Converter is compliant with Serial ATA specificationIncluded power cable and SATA connective cable.Size: 55 *50* 5mmWeight: 63g |
|
|
Tripplite P936000 Ide To Serial Ata (Sata) Conve $30.49 Tripp Lites P936000 Serial ATA (SATA) to IDE converter allows a standard parallel ATA hard disk drive CDROM CDRW DVD ROM DVD + RW etc to be used with Serial ATA Controller cards or motherboards with Serial ATA ports and meets the specification of Serial ATA 1.0 interface. Easily connect IDE/ATA Drives to a SATA Controller Compliance with Serial ATA Gen 1.0. Master/slave device emulation support. Supports PIO mode 0 4. Supports Ultra DMA mode 0 7. Supports UDMA data transfer rates of up to 150MBps Supports ATAPI Packet command set. Supports 48bit LBA addressing. Supports additional ATA command for serial ATA SCR access. Serial ATA power save mode supported Serial ATA BIST operation. Supports hotplugging System Requirements Supports any operating system when a PC with available IDE hard disk and SATA controller are used Package Includes Serial ATA to IDE Converter x 1 Serial ATA Cable x 1 Power supply cable x 1 User s Manual x 1 |
|
|
GWC AD3300 Serial ATA to IDE Converter (Serial ATA Port to IDE Device), SATA to IDE Converter/Adapter $12.99 Type: SATA to IDE Specifications: The serial ATA to IDE converter allows standard parallel ATA hard disk drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc, to be used with serial ATA PCI cards or motherboards with serial ATA port and meet the specification of Serial ATA 1.0 interface. Features: Compliance with Serial ATA Gen 1.0. Master/slave device emulation support. Support PIO mode 0~4. Support Ultra DMA mode 0~7. Support UDMA data transfer rates of up to 150MBps Support ATAPI Packet command set. Support 48-bit LBA addressing. Support additional ATA command for serial ATA SCR access. Serial ATA power save mode supported. Serial ATA BIST operation. Support hot-plug. Package Contents: Serial ATA to IDE Converter SATA Cable User's Manual Parts: 1 year limited |
|
|
SATA Serial ATA + USB + IDE PCI COMBO CARD Adapter $15.67 SATA Serial ATA + USB + IDE 7 Ports PCI PC Card Adapter |
|
|
IDE-Serial ATA converter - Storage controller - ATA-133 - SATA $21.99 Addonics IDE-Serial ATA converter - Storage controller - ATA-133 - SATA - for Combo Hard Drive Pocket ExDrive |
|
|
IDE to SATA Adapter Converter - storage controller - SATA-150 - Ultra ATA 133 $12.99 StarTech.com IDE to SATA Adapter Converter - Storage controller - 2 Channel - SATA-150 - 150 MBps - Ultra ATA 133 |
|
|
SERIAL ATA CONVERTER BOARD - storage controller - IDE - SATA $32.99 C2G SERIAL ATA CONVERTER BOARD - Storage controller - 1 Channel - IDE - SATA - blue translucent |
|
|
free shipping IDE PCI SATA Serial ATA Card PC VIA VT6421A 6421 #9592 $15.62 IDE PCI SATA Serial ATA Card PC VIA VT6421A 6421 |
|
|
4Pin IDE to 15Pin Serial ATA SATA Power Adapter Cable $6.49 Description:New generic 4Pin IDE to 15Pin Serial ATA SATA Power Adapter CableGood quality, fast transfer speed and work steadily of this 4Pin IDE to 15Pin CableConvert your IDE Hard drive to SATA Hard driveThis is a reliable and durable IDE to SATA Power CableConnectors: 4Pin IDE to 15Pin SATALength: 20cmWeight: 13gPackage included:1 x 4Pin IDE to Serial ATA Cable |
|
|
SIIG IDE to SATA HDD Adapter $18.99 1 x 1 x IDE/ATA Male 1 x SATA 3 Compliant With Serial ATA 1.0a Specification Data Transfer Adapter IDE to SATA HDD Adapter IDE/ATA RoHS SC-SA0512-S1 SIIG SIIG, Inc Yes www.siig.com |
|
|
Rosewill RC-A-SATA-IDE SATA to IDE Adapter $14.99 Type: SATA to IDE Specifications: SATA II 3Gbps Mini Adapter Board (size 75mm x 26mm) Features: Convert the High Capacity SATA II 3Gbps and SATA 1.5Gbps devices, like Blu-ray Disc, optical drive, SSD, Hard Drive and SATA Storage Device, to work with IDE Host Controller Supports any type of SATA II 3Gbps and SATA I 1,5Gbps Device (Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk) Convert SATA Drive like a standard IDE/ATAPI Drive 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB Compliant with Serial ATA 2.6 Support Jumper setting for IDE Master, Slave and Cable Select Modes Tag Command Queuing (Max 32 entries) SATA Hot-plug SATA Power Save modes ATA/ATAPI PIO mode data transfer ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s ATA/ATAPI-7 Streaming feat... |
|
|
MASSCOOL XWT-GHQ04 IDE to SATA Convert $13.99 Type: IDE to SATA Specifications: chipset:sil3811 IDE Drive to SATA Bus Bridge board Convert standard ATA 5 or ATA6 IDE drive mechanisms into SATA mechanisms Drive access LED connector IDE 40pin drive connector Standard 4-pin power connector |
|
|
Bidirectional IDE to 2 SATA or 2 SATA to IDE Adapter Converter $7.49 Description: IDE to 2 SATA Adapter: One 40 pin IDE portTwo serial ATA portSata connective cableConverts sevial ATA to paraller ATAIDE to 2 SATA Converter supports ATA 100/133Compliant with serial ATA specificationSata cable length: about 24.5cmWeight: 45.5gPackage contents:1 x 2 SATA to IDE Adapter1 x 7pin SATA connective cable |
|
|
IDE to SATA or SATA to IDE HDD Converter Adapter $12.49 Description:With the HDD SATA IDE Converter, you could convert from IDE to SATA or SATA to IDE.SATA slot is now available even if your motherboard does not have any SATA slot. Save your money, save our planet!Plug and Play! No drivers needed! User friendly device!Support Win 98 or above (Win Vista Supported!)Free power cable is now included as a free gift!This SATA to IDE Adapter is a Non-OEM(Generic) Product.Specification:Compliant with S-ATA 1.0 SpecificationCompatible with Ultra ATA 100/133IDE to SATA Adapter supports two HDD with >1000GBSupport Serial-ATA transfer rate of 1.5GB/s (150MB/s)Support two Optical Devices (Please be noted that your Optical Devices must be ATPIP compatible)Size: ~(L)5.1x (W)4.7 x (H)0.7cmWeight: 54gPackage Content:1 x IDE to SATA Adapter1 x 4pin power cable1 x SATA data cable |
|
|
7 + 6 Pin to Serial ATA SATA Data IDE Power Cable $6.49 Description:This is a SATA 7 + 6 Pin Hard Disk Cable/2 Pin Power Cable/SATA Data CableOne 7 pin + 6 pin SATA connector splits into a 2 pin IDE power connector and a 7 pin SATA data connector.Superior quality and safetyThe sata cable is male.7 + 6 Pin Serial ATA Cable can connect with hard diskSATA to SATA Cable length: 52cm approx.Weight: 23.6gPackage content:1 x SATA to IDE Power Cable |
|
|
SATA to IDE/ IDE to SATA 2-in-1 Converter Cable $12.24 This is a SATA to IDE/ IDE to SATA 2-in-1 Converter Cable. Convert IDE (Standard Parallel IDE) to SATA interface and enable SATA hard disk to be installed with this converter cable.Includes:SATA to IDE/ IDE to SATA converterSATA cablePower cable2-in-1 Converter Cable:Bidirectional IDE to SATA ConverterCompliant with Serial ATA (SATA) SpecificationSupports ATA 100/133Support Windows 98/ SE/ ME/ 2000/ XP/ Vista/ WIN 7/ Mac OS 8.6 and aboveMini board size, no space wastedAccessory onlyConnector:1 x 40-pin IDE port2 x 4 pin Serial ATA port1 x 4-pin power portWarning: California residents only, please note per Proposition 65, this product may contain one or more chemicals known to the State of California to cause cancer, birth defects, and/or other reproductive harm. Wash hands after handling or using this product, and contact the manufacturer(s) for information regarding the chemicals that may be contained in these products. |
|
|
IDE ATA 100/133 DVD HDD CD to Serial SATA Adapter Converter $10.49 Description:IDE 100/133 HDD/DVD/CD (Motherboard) TO SERIAL SATA (HDD or DVD/CD-ROM) CONVERTER ADAPTER.Ideal tool for data backups, recovery and transferringUsing this IDE to SATA Adapter, you can convert all SATA type devices CD-ROM/CD-RW/DVD/DVD-RAM/HDD into IDE deviceHDD to SATA Adapter accept SATA commands through the Serial ATA interface from the host, decode the commands and convert them to parallel ATA commands to the deviceSupport the Serial ATA transfer rate of 1.5 Gb/s (150 MB/s) on the serial side and is compatible with ultra ATA-133 on the parallel ATA sideMini board size, no space wasted.Specification:Serial SATA Adapter supports ATA 100/133Compliant with Serial ATA specificationData transfer rate up to 150 MbpsConnectors: One 40 pin IDE port, One Serial ATA port, One 4pin power connectorPlug and playSupport Windows 98/SE/ME/2000/XPSize: L5.4 x W4.7 x H0.6cmWeight: 57gPackage included:1 x IDE to SATA Converter1 x Power cable1 x SATA cable |
|
|
Hard Drive IDE to SATA/SATA to IDE Bidirectional Converter $9.99 Description:Bidirection converter for serial and parallel ATA translation.Convert P-IDE ( Standard Parallel IDE ) to SATA interface and allow you to install the High performance SATA hard disk to your PC.Convert SATA ( Serial ATA ) to IDE interface and allow you to install the IDE type hard disk to your PC.The IDE to SATA Adapter supports ATA 100/133Compliant with Serial ATA SpecificationsThis SATA to IDE Converter is easy to nstall & no driver required.Support SATA I transfer rate of 1.5 Gbps ( 150 MB/s ).One 40 pin IDE port.One Serial ATA port.The IDE SATA Bidrectional Converter is designed with ultra low power consumption.Support spread spectrum clocking to reduece EMI.Support partial/slumber power management.Provide adjustable TX signal amplitude and pre-emphasis level.Size of the converter: 5.4cm long, 4.8cm wide ( at the widest ).Weight: 57g.Package Includes:1 x SATA to IDE Bidirectional Converter.1 x SATA Cable.1 x Power Cable. |
|
|
Free shipping USB 2.0 to SATA/IDE HDD Adapter Cable (DX41) $4.88 USB 2.0 to SATA/IDE HD HDD Adapter Cable Serial ATA |
|
|
SYBA SD-ADA50016 SATA to IDE (IDE to SATA) Bi-Directional Adapter $12.99 Type: SATA to IDE Features: Unique bi-directional SATA – IDE converter Supports 3.5-inch SATA and IDE (ATA) hard drive Supports 5.25-inch SATA and IDE (ATA) optical drives Power-On and HDD-Activity LED indicators Ultra low power consumption Connectors: one IDE (ATA) connector, one SATA host connector (Yellow), one SATA device connector (Black) and one 4-pin FDD power connector Two independent Ultra ATA channels with 128/256 bytes buffer per channel Driverless. No driver is needed Serial ATA Interface Complies with SATA 1.0a specification Supports SATA Generation 1 with transfer rate up to 1.5Gbps (150MB/s) Supports Spread Spectrum in receiver Supports SATA power saving mode: Partial and Slumber IDE (ATA) Interface Complies with ATA Specification Complies with Ultra ATA 133 with transfer rate up to 133MB/s Supports PIO mode o, 1, 2, 3, 4, 5, ... |
|
|
StarTech.com IDE/SATA to eSATA/USB Hard Drive Enclosure - Storage Enclosure - 1 x 3.5" - 1/3H Internal - IDE, Serial ATA, U... $44.36 StarTech.com IDE/SATA to eSATA/USB Hard Drive Enclosure - Storage Enclosure - 1 x 3.5" - 1/3H Internal - IDE, Serial ATA, U... |
|
|
Blue Transparent IDE to SATA Converter Adapter $14.99 Description:SATA to IDE Converter converts serial ATA to paraller ATA.IDE to SATA Adapter converts parallel ATA to Serial ATA.IDE to SATA Converter supports ATA 100/133.SATA to IDE Adapter is compliant with Serial ATA specification.Features:One Serial ATA port.One 4 pin power connector.Converts Serial ATA to paraller.Size Adapter: ~5.7x 4.2 x 13cmWeight: 73gPackage contents:1 x IDE and SATA Converter Adapter1 x power cable1 x SATA cable |
|
|
IDE To SATA Or SATA To IDE Adapter $11.99 OverviewWith Led Indicated powerEasy install amp;No Driver neededSerial ATA 1.0 specification compliantAutomatic serial ATA 1.5 Gbps speed negotationATA/ATAPI PIO mode 0 to 4ATA/ATAPIPIUltra DMA of transfer rate16.7,25,33,48,66,100,133,and 150MB/SSupport Spread Spectrum Clocking to reduce EMI |
|
|
SIIG SATA-to-IDE Adapter $21.99 1 1 x 40-pin IDE Female 1 x 7-pin SATA Male Serial ATA (7-pin) Compliant with Serial ATA 1.0a specificationSupports ATA/ATAPI Ultra DMA data transfer rates up to 150MB/sCompliant with ATA/ATAPI PIO modes 0 to 4 Pentium® or equivalent PC with an available Serial ATA portWindows® 2000/XP (32-/64-bit)/Server 2003 (32-/64-bit)/Vista (32-/64-bit) Quickly converts older IDE/Ultra DMA devices for use with newer Serial ATA controllersCompact L-shaped design reduces interference with other devicesConnects directly to an IDE drive - no expansion slot requiredConnects most large Ultra ATA 133/100/66/ hard disk drives to the latest Serial ATA controllersWorks with many ATAPI optical storage devices such as CD-ROMs, CD-RWs, DVD-ROMs and DVD-RWs (up to 16x) SATA to IDE AdapterSATA data and "Y" spit power cablesQuick Installation Guide Box DMA EIDE FCC, CE, RoHS Lifetime Repair/Replace - Not Applicable PC PIO Retail RoHS SATA-to-IDE Adapter SC-SA0112-S1 SIIG SIIG, Inc Serial/Ultra ATA Controller Slimline Taiwan Ultra ATA Ultra ATA 100/66/33 Ultra ATA/100 (ATA-6) Ultra ATA/133 (ATA-7) Ultra ATA/33 (ATA-4) Ultra ATA/66 (ATA-5) Ultra DMA Up to 1 x IDE/ATA Up to 1.04 Gbps Yes www.siig.com |
|
|
BYTECC IDE Adaptor IDE to SATA Converter For Drive $10.99 Type: IDE to SATA Specifications: Connectors: 1 x 40 pin IDE connector for host connection 1 x 7+15pins Serial ATA port for SATA hard drive 1 x 4-pin power connector Features: Converts IDE connector for Serial ATA Drive Compatible with Ultra ATA 100/133 with Data transfer rate up to 1.5 Gbps (150 MB/s) No Driver required Supports SATA devices such as CD/DVD Drives, CD/DVD Burners....) Supports up to 2 channels & 2 devices With no Jumpers, makes it easy for configuration Parts: 180 days limited |
|
|
RXD-629 IDE to SATA Converter Host $3.95 - Plugging directly into your Hard Driver's IDE port- The other side plug to your motherboard's SATA socket- Converts Parallel ATA to Serial ATA- Supports ATA 100/133- Compliant with Serial ATA specification- Mini board size, no space wasted |
|
|
40-Pin IDE to SATA or SATA to 40-Pin IDE Bilateral Adapter Card $4.7 - Include a switch for IDE-to-SATA or SATA-to-IDE operation- LED indicated power- Easy to install and no driver is required- ATA transfer rate 100, 133- Low power consumption- Converts parallel ATA to Serial SATA- Enable you to install the high performance SATA hard disk to your PC- SATA cable (43cm) and power cable (25cm) includedSpecificationsDimensions: 2.13 in x 1.77 in x 0.35 inWeight: 2.05 oz |
|
|
Tripp Lite P936-000 IDE to Serial ATA ( SATA ) Converter $18.99 Type: IDE to SATA Specifications: Connector A: 40 POS. Socket (Female) Connector B: 4 Pin (Female) Connector C: 7 Pin SATA Straight (Male) Connector D: 4 Pin (Male) System Requirements: Supports any operating system when a PC with available IDE hard disk and SATA controller are used Features: Easily connect IDE/ATA Drives to a SATA Controller Compliance with Serial ATA Gen 1.0 Master/slave device emulation support Supports PIO mode 0 - 4 Supports Ultra DMA mode 0 - 7 Supports UDMA data transfer rates of up to 150MBps Supports ATAPI Packet command set Supports 48-bit LBA addressing Supports additional ATA command for serial ATA SCR access Serial ATA power save mode supported Serial ATA BIST operation Supports hot-plugging Package Contents: Serial ATA to IDE Converter x 1 Serial ATA Cable x 1 Pow... |
|
|
Promise PDC20375 3 SATA IDE Serial ATA RAID PCI Card For HDD #8073 free shipping $7.93 Promise PDC20375 3 SATA IDE Serial ATA RAID PCI Card For HDD |
|
|
Promise PDC20375 3 SATA IDE Serial ATA RAID PCI Card For HDD #8073 $4.69 Promise PDC20375 3 SATA IDE Serial ATA RAID PCI Card For HDD |
|
|
2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter - Storage controller - SATA-150 - Ultra ATA 133 $16.99 StarTech.com 2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter - Storage controller - SATA-150 - Ultra ATA 133 |