Phillips Lcd Screen
 |
US $260.00
How to Replace a PSP Screen?
The PSP is an advanced handheld game console with a sleek LCD screen. The PSP screen can become damaged through repeated use, and you'll need to replace the entire screen. Doing so requires you to buy a new PSP screen. You can replace the screen on your PSP by yourself if you feel comfortable disassembling electronic devices.
Requirement
- Replacement PSP screen
- Phillips screwdriver
- Flathead screwdriver
1. Make sure you have all the proper tools before hand. Once you are ready, turn off the PSP.
2. Remove all accessories attached to your PSP, including game discs and memory sticks.
3. Remove the battery cover from the back of the PSP. Take out the battery and place it aside.
4. Place your PSP face down on a clean, flat surface, face up. Pull the circular portion of the stick away from the PSP, and it will slide off.
5. Turn your PSP over and locate the five screws on the back of the PSP. There is one screw in each corner, with the screw in the bottom-left corner slightly obscured by the warranty sticker. Do not tear off the warranty sticker---instead, fold it back just enough so you can access the screw. If the warranty sticker is damaged, it will void your PSP's warranty.
6. Lift the back of the PSP off the faceplate. Put the faceplate aside and place the PSP on its back.
7. Use a flathead screwdriver to push out the clips holding the PSP's screen in place. There are two clips on the left side of the screen and two clips on the right. Tilt the screwdriver toward the center of the PSP, which will cause the clips to push outward and release the screen.
8. Bring the PSP screen forward so it is laying face down. Two brown cables keep the screen connected to the circuits of the PSP. These cables are part of the screen, so they will be replaced by the cables on the new screen.
9. Use your flathead screwdriver to push up the clasps connecting the cables to the motherboard. Gently slide the cables out and fully detach the PSP screen.
10. Place the new PSP screen face down in the same position that the old one was in. Remove any plastic film there might be then line it up with the top of the screen.
11. Attach the brown cables to the same clasps, with the right cable in the right clasp and the left cable in the left clasp. Use your flathead screwdriver to lift the clasps up as you put the cables in place.
12. Fit the screen into place and push the four clips back in, securing the new PSP screen. You can push the clips back into place with your finger until they fit snugly around the screen.
13. Reattach the faceplate and place the battery back into the PSP. Secure it with the five screws. Once connected everything should be able to fit right back in the PSP and then it should run just as new!
About the Author
The PSP is an advanced handheld game console with a sleek LCD screen. The PSP screen can become damaged through repeated use, and you'll need to replace the entire screen. Doing so requires you to buy a new PSP screen. You can replace the screen on your PSP by yourself if you feel comfortable disassembling electronic devices.
|
|
LG Phillips 15" XGA Glossy LCD Screen LP150X08TLA4 $70.38 LG Phillips 15" XGA Glossy LCD Screen LP150X08TLA4 |
|
|
LG Phillips 17.1" WXGA+ Glossy Laptop LCD Screen LP171WP4TLN2 $114.19 LG Phillips 17.1" WXGA+ Glossy Laptop LCD Screen LP171WP4TLN2 |
|
|
LG Phillips 15.4'' WXGA Glossy Laptop LCD Screen Panel LP154W01TLAE $86.74 LG Phillips 15.4'' WXGA Glossy Laptop LCD Screen Panel LP154W01TLAE |
|
|
Original LCD Display Screen Replacement for LG KF510 $10.81 Specifications: - This is a high quality original LG KF510 LCD screen replacement part - It is used to repair faulty screen, this will also cure: display problems, dead pixels, cracked LCD screens, wrong color issues - It will fix your broken lcd display - Perfectly fit for your phone - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Each screen is tested before shipping and are 100% working - Compatible with: LG KF510 - Size: 2.2 inch(Screen) Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: 1 x LCD Display Screen for LG KF510 ? ? ? |
|
|
Original LCD Screen Display Replacement for LG U970 $10.81 Specifications: - It is used to repair faulty screen, this will also cure display problems, dead pixels, cracked LCD screens, wrong color issues - It will fix your broken LCD display - Perfectly fit for your phone - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Each screen is tested before shipping and are 100% working - This is an original product - Compatible with: LG U970 - Screen Size: 2.2in Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: - 1 x Original LCD Screen Display Replacement for LG U970 ? ? ? ? |
|
|
LCD Screen Protector $2.99 LCD Screen Protector |
|
|
Original LCD Display Screen Replacement for LG KX218 $12.95 Specifications: - High quality LG KX218 LCD display screen for your mobile phone - Made of quality materials, main LCD screen with metal frame - This LG KX218 LCD screen is the best replacement for your damaged, cracked, marked or dirty screen - Save money and give your phone a new look - Easy installation, no soldering needed - Compact and light weight, has been tested for 100% Working Condition - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Best replacement for your damaged, cracked or faulty cell phone screen display - Worked in perfect condition, easy installation - no soldering, no special tool needed - Get a replacement, or an extra to keep on hand - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Compatible with LG KX218 - It is used to repair a faulty screen, this will also cure: display problems, dead pixels, cracked LCD screens, wrong color issues - This is an original product - Screen Size: 1.8inch Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: 1 x LCD Display Screen for LG KX218 ? ? ? ? ? ? ? ? |
|
|
Original LCD Display Screen Replacement for LG KP320 $14.02 Specifications: - Brand new high quality cell phone LCD screen - Quality material, premium craftsmanship - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Best replacement for your damaged, cracked or faulty LG KP320 screen displayEasy installation - no soldering, no special tool needed - This is an original product - Compatable with: LG KP320 - Screen Size: 2in ? Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: - 1 x LCD Screen Replacement for LG KP320 ? ? ? |
|
|
Original LCD Screen Display Replacement for LG KF900 $22.59 Specifications: - 100% brand new and never used - High quality original LCD screen display - Compact and light weight - Worked in perfect condition - Compact and light weight, has been tested for 100% Working Condition - Best replacement for your damaged, cracked or faulty cell phone screen display - Worked in perfect condition, easy installation - no soldering, no special tool needed - Get a replacement, or an extra to keep on hand - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Very convenient and practical - This is an original product - Compatible with: LG KF900 - Dimension: 3"(Screen) Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: 1 x LCD Screen Display for LG KF900 ? ? |
|
|
Original LCD Display Screen Replacement for LG CU515 $10.81 Specifications: - Quality material, premium craftsmanship - 100% perfect fit, make your LG CU515 like a new one - Brand new high quality cell phone LCD screen - Has been tested for 100% Working Condition - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Best replacement for your damaged, cracked or faulty LG CU515 screen display - Easy installation - no soldering, no special tool needed - This is an original product? - Compatable with: LG CU515 - Screen Size: 2.0" ? Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: - 1 x LCD Display Screen for LG CU515 ? |
|
|
FOR Nokia 3208 7230 LCD SCREEN FREE SHIPPING $7.99 LCD SCREEN |
|
|
FOR Nokia n95 LCD SCREEN FREE SHIPPING $7.99 LCD SCREEN |
|
|
FOR Samsung C3510 LCD SCREEN FREE SHIPPING $11.49 LCD SCREEN |
|
|
FOR Nokia N97 LCD SCREEN FREE SHIPPING $15.99 LCD SCREEN |
|
|
FOR LG OPTIMUS GT540 LCD SCREEN FREE SHIPPING $14.49 LCD screen |
|
|
FOR Samsung S3650 Corby LCD SCREEN FREE SHIPPING $8.99 LCD SCREEN |
|
|
FOR Samsung S8000 LCD SCREEN FREE SHIPPING $14.99 LCD SCREEN |
|
|
FOR Blackberry 9700 002/111 LCD SCREEN FREE SHIPPING $39.99 LCD screen |
|
|
SH-L32W - LCD screen hood $46.99 Sony SH-L32W - LCD screen hood |
|
|
PCK-LH4AM - LCD screen protector $19.99 Sony PCK-LH4AM - LCD screen protector |
|
|
Lenovo LCD Panel 15.0-in. XGA LG-Phillips 13N7138 $84.38 Lenovo LCD Panel 15.0-in. XGA LG-Phillips 13N7138 |
|
|
Panasonic Screen Protector For LCD $69.99 10.4" 10.4" LCD CF-VPF11U LCD Panasonic Screen Protector Screen Protector For LCD www.panasonic.com |
|
|
TS-CASE Original LCD Display Screen Replacement for LG KS660 $17.24 Specifications: - This is a high quality LG KS660 LCD screen replacement part - It is used to repair faulty screen, this will also cure display problems, dead pixels, cracked LCD screens, wrong color issues - It will fix your broken LCD display - Perfectly fit for your phone - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Each screen is tested before shipping and are 100% working - This is an original product - Compatible with: LG KS660 - Screen Size: 3.0in - Color: Black ? Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: - 1 x Original LCD Display Screen Replacement for LG KS660 ? ? ? ? ? ? |
|
|
Original LCD Screen Display Replacement for LG KG70 KE970 $10.81 Specifications: - This is a high quality original LG KG70 KE970 LCD screen replacement part - It is used to repair faulty screen, this will also cure: display problems, dead pixels, cracked LCD screens, wrong color issues - It will fix your broken lcd display - Perfectly fit for your phone - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Each screen is tested before shipping and are 100% working - Compatible with: LG KG70 KE970 - Size: 2.2 inch(Screen) Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, and then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: - 1 x LCD Display Screen for LG KG70 KE970 |
|
|
Original LCD Display Screen Replacement for LG KF240 KF310 $11.88 Specifications: - This is a high quality LG KF240 KF310 LCD screen replacement part - It is used to repair faulty screen, this will also cure display problems, dead pixels, cracked LCD screens, wrong color issues - It will fix your broken LCD display - Perfectly fit for your phone - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Each screen is tested before shipping and are 100% working - This is an original product - Compatible with: LG KF240 KF310 - Screen Size: 2.0in Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: - 1 x LCD Screen for LG KF240 KF310 ? ? ? ? ? |
|
|
Phillips $11.49 Phillips |
|
|
FOR Nokia 6500 Classic 6500C 8600 5310 LCD SCREEN FREE SHIPPING $6.49 LCD SCREEN |
|
|
FOR HTC Touch P3450/Dopod S1/XDA Nova(GSM) LCD SCREEN FREE SHIPPING $11.99 LCD screen |
|
|
FOR Sony Ericsson s500 s500i w580 w580i LCD SCREEN FREE SHIPPING $7.99 LCD screen |
|
|
FOR Nokia N95 8G 8GB LCD SCREEN FREE SHIPPING $10.99 LCD SCREEN |
|
|
FOR Nokia E63 E71 E72 LCD SCREEN FREE SHIPPING $7.99 LCD SCREEN |
|
|
FOR Nokia E65 6110 5700 6500S 5610 LCD SCREEN FREE SHIPPING $7.99 LCD SCREEN |
|
|
FOR Blackberry CURVE JAVELIN 8900 002/111 LCD SCREEN FREE SHIPPING $29.99 LCD screen |
|
|
FOR SAMSUNG S5230 TOCCO LITE LCD SCREEN FREE SHIPPING $9.99 lcd screen |
|
|
FOR HTC Google G4 Tattoo LCD SCREEN FREE SHIPPING $21.99 LCD screen |
|
|
FOR HTC TOUCH HD Blackstone T8282 LCD SCREEN FREE SHIPPING $22.99 LCD screen |
|
|
FOR Nokia N82 N77 N79 E66 6210N LCD SCREEN FREE SHIPPING $6.99 lcd screen |
|
|
FOR Nokia 2630 2760 N2630 LCD SCREEN FREE SHIPPING $5.99 LCD SCREEN |
|
|
Original LCD Display Screen Replacement for LG KG77 KE770 $16.16 Specifications: - Brand new high quality cell phone LCD screen - Quality material, premium craftsmanship - 100% perfect fit, make your LG KG77 / KE770 like a new one - Replace your cell phone scratched, broken, damaged or cracked LCD screen with new one - Best replacement for your damaged, cracked or faulty LG KG77 / KE770 LCD screen display - Easy installation - no soldering, no special tool needed - Compatible with LG KG77 / KE770 - This is an original product - Size: 45 x 34 x 1 mm/1.77 x 1.34 x 0.04 in (H x W x T) Instructions for Installing the Replacement LCD Screen of a Cell Phone: - Turn off your cell phone and remove the back cover that protects the battery, SIM card and battery compartment - Lift out the battery, then slide the SIM card out of its holder usually inside the battery compartment - Remove all the visible Phillips-head screws from the battery compartment and back casing of the phone - Use a guitar pick, credit card or thin, hard piece of plastic to separate the back casing from the cell phone assembly. Insert the hard piece of plastic into the crease along the outside of the cell phone. Work your way around the entire phone until the back casing is completely separated from the phone. This will reveal the circuit board - Remove any visible Phillips-head screws securing the circuit board to the phone's front casing. Disconnect the LCD ribbon connector from the visible side of the circuit board - Lift the circuit board from the phone, then disconnect the keypad ribbon cable from the opposite side of the circuit board. Remove the circuit board from the front casing of the phone and set it aside - Lift the keypad out of its compartment inside the front casing of the phone, and set it aside - Remove the Phillips-head screws, if any, that secure the LCD screen to the front casing of the phone. Lift the LCD screen carefully out of its compartment on the front casing - Install the new LCD screen by repeating this procedure in reverse Package Included: 1 x LCD Display Screen for LG KG77 / KE770 ? ? ? ? ? |