Pci Adpt Sma
 |
No items matching your keywords were found.
Client Software and Adapter
Any client computer, laptop or wireless device with a compatible wireless client adapter allows connectivity with an access point. The client adapter is a radio transmitter with firmware that supports any of 802.11a/b/g signaling. That is needed before the device can associate and authenticate with the access point. Some access points have a no client mode that doesn't allow any association from clients extending network distance. Client wireless software included with the adapter must be implemented with specific Windows platforms. The client adapter will be integrated with the laptop, PCMCIA slot or desktop PCI bus slot. They will support specific wireless standards, antenna characteristics, WiFi certification, WDS, network range and security. The wireless manufacturer software must be implemented for all available features. The following is a list of some client adapter configured settings.
Access Point (AP)
As the name suggests an AP (access point) allows connectivity between the wireless client or wireless device and the wired network. The AP takes wireless data packets from a client and translates them to standard Ethernet data frames before transmitting across the wired network. Standard category 5 twisted pair cabling will connect the AP point Ethernet port with a catalyst switch Ethernet port. The maximum distance between access point and network switch is 100 meters standard with Ethernet design.
WLAN Controllers
Wireless designs with hundreds of root APs on an enterprise network will sometimes deploy wireless LAN controllers. The design specifies lightweight APs connecting to a network switch. The 4404 WLAN controller device acts as a hub connecting 4 network switches supporting 100 access points. Cisco wireless control system (WCS) wireless network management software is sometimes deployed with WLAN controller design for planning, configuring and optimizing the network.
Power Injector
Cisco access points have a variety of power options such as AC adapters, power over Ethernet and power injectors. The placement of APs is such that in some situations an AC power outlet isn't available. Should your Ethernet switch not support power over Ethernet, an option such as power injectors extends the distance from an AC outlet. Distances of 1.24 miles are available with a fiber optic media converter.
Power over Ethernet
Cisco access points can be deployed with power over Ethernet (PoE) should the network switch modules support that feature. The distance of 300 feet is the same with Cisco prestandard and 802.3af. The Cisco prestandard use Cat 5 cabling pins 1, 2, 3, 6 for powering devices while 802.3af uses 1, 2, 3, 6 with 10/100/1000BaseT signaling and 4, 5, 7, 8 with 10/100BaseT. Select a network switch module with the power over Ethernet standard your AP has implemented and has a power wattage rating per port for your specific devices. The network switch power supply should be upgraded to support additional power draw from multiple devices. Deploying power over Ethernet will decrease implementation costs with deployment of IPT, wireless and Gigabit. See network switch documents at Cisco web site for information on what network switching modules support PoE and wattage ratings. 802.3af defines powered device class 2 at 3.84W - 6.49W and class 3 at 6.49W - 12.95W.
Power Patch Panel
Cisco inline power patch panels can be deployed where Ethernet switches don't support power over Ethernet and power injectors aren't an option. The patch panel does no switching. It powers the devices through a Cat 5 cable that is a maximum 300 feet at a specific rated wattage per port. The patch panel connects the access point to the wired switch with a patch cable.
Shaun Hummel is the author of Cisco Wireless Network Design Guide and has a web site focused on information technology solutions, online technical interviews and certifications.
[http://www.networkjobsolutions.com]
|
|
Startech.com / PCI Express Riser Card Adpt / PEX1RISERF $50.63 Startech.com - PCI Express Riser Card Adpt - PEX1RISERF |
|
|
8000 PLUS SLOT SAVER ADPT-PCI W/ 8 1665 $229.99 8000 PLUS SLOT SAVER ADPT-PCI W/ 8 1665 |
|
|
HP / HPQ NC360M PCI-E DUAL PORT GETH ADPT / 445978-B21 $354.22 HP - HPQ NC360M PCI-E DUAL PORT GETH ADPT - 445978-B21 |
|
|
HP / HPQ NC325M PCI-E QUAD PORT GETH ADPT / 416585-B21 $510.72 HP - HPQ NC325M PCI-E QUAD PORT GETH ADPT - 416585-B21 |
|
|
Allied Telesyn 10/100BTX Plus 100BFX SC Fiber PCI Adpt AT2701FTXSC901 $128.42 Allied Telesyn 10/100BTX Plus 100BFX SC Fiber PCI Adpt AT2701FTXSC901 |
|
|
HP NC326m PCI-e Dual PT 1GB Adpt c-Class 404984001 $51.96 HP NC326m PCI-e Dual PT 1GB Adpt c-Class 404984001 |
|
|
StarTech PCIX1PEX4 PciX To X4 Pci Express Adpt $233.45 PCIX to x4 PCI Express Adapter Card |
|
|
StarTech PEX1RISERF Pci Express Riser Card Adpt $57.07 The PEX1RISERF x1 to x1 PCI Express Riser Card (with flexible cable) allows for installation of a x1 PCI Express (PCIe) card into a 1U rack mount or small form factor chassis that doesn t offer direct mounting to the motherboard. The flex cable allows installation into almost any rack mount chassis up to the full PCIe (x1) host connection speed. Backed by a StarTech 1year warranty and free lifetime technical support. Designed to fit most 1U or larger server chassis with riser card support. Shielded 7 cm flex cable. Complete pass through design supports the latest PCI Express speeds. |
|
|
Startech PCI420USB 4 Port USB 2.0 PCI Card Adpt $31.29 4 Port USB 2.0 PCI Card Adapter PC/Mac Plug amp; Play MODEL: PCI420USB VENDOR: STARTECH LTD FEATURES: 4 Port PCI USB 2.0 Card Want to be able to plug in the most demanding nextgeneration peripherals and experience highspeed data transfer rates? With speeds up to 40x faster than its predecessors USB V2.0 is the new standard for highspeed peripheral connectivity. The PCI420USB 4port PCI card lets you plug in your most demanding USB peripherals and still enjoy data transfer speeds of up to 480 Mbps. And since the PCI420USB is backwardscompatible with USB 1.1 specifications your less demanding peripherals will still function perfectly with no adjustments. The PCI420USB also features Plug and Play connectivity letting your connect and swap your peripherals with ease. Links up to 127 USB devices Compliant with PCI specification 2.2 Very simple to install and use Hot Plug and Play feature allows devices to be connected or disconnected without turning off the PC.INTERFACE 32bit PCI 2.2 compliant CONNECTORs (4) external Type A USB 4 pin female ports (1) internal Type A USB 4 pin female port 4 EHCI compliant USB 2.0 DRIVERs Windows 98SE ME 2000 XP APPROVALs FCC Class B REQUIRES Pentium II class or better PC running Windows 98SE and above with one free PCI slot. MANUFACTURER WARRANTY:amp;nbsp;amp;nbsp;Lifetime Limited Warranty |
|
|
Cableiq Rj45/11-Mod Adpt $54.99 CABLEIQ RJ45/11-MOD ADPT |
|
|
Hd-Plc Eth Adpt $148.99 HD-PLC ETH ADPT |
|
|
UNIVERSAL SLAT WALL adpt $31.99 UNIVERSAL SLAT WALL adpt |
|
|
ATLANTIC TECH SPEAKER adpt $112.99 ATLANTIC TECH SPEAKER adpt |
|
|
No-Twist Phone Cord Adpt $10.99 NO-TWIST PHONE CORD ADPT |
|
|
StarTech.com 1ft N-Male to RP-SMA Antenna Cable $20.99 1 x N-type 1 x RP-SMA 12" 1ft N-Male to RP-SMA Antenna Cable Startech Routers, Access Point and PCI cards Belkin, Compaq, D-Link, Intel, Netgear, Linksys & Siemens wireless networking devices Copper Lifetime N-type NRPSMA1MM Network Cable Orange RG400U RP-SMA StarTech.com This durable N Male to RP-SMA Wireless Antenna Pigtail Adapter Cable converts an RP-SMA type connector to an N Male connector._x000D_ Compatible with StarTech.com Routers, access points and PCI cards as well as Belkin, Compaq, D-Link, Intel, Netgear, Linksys & Siemens wireless networking devices, the N Male to RP-SMA Wireless Antenna Pigtail Cable is backed by StarTech.com's Lifetime Warranty. www.startech.com |
|
|
HPCompaq 468332B21 Nc522Sfp 2Pt 10Gbe Svr Adpt $1138.19 Network Adapter. Interface (Bus) Type: Pci Express 2.0 X8. Connectivity Technology: Wired. Processor: 1 x Nx3031 Netxen. Dimensions: 2.7 x 6.6 . |
|
|
2.4GHz 13dBi WiFi Router Wireless SMA Booster Extender Antenna $24.49 Description:Boost your wireless coverage with this 13dBi Router Antenna.Work with any wireless IEEE 802.11b/ g router/ AP/ PCI/ PCMCIA adapter with reverse SMA connector, improve signal strength and signal quality.The 2.4GHz WiFi Antenna adds more power and distance for your wireless network, help to clear up dead spots in your network.Operate with AP/Router with RP SMA connectorThe SMA Booster Antenna is compliant with IEEE 802.11b and 802.11g wireless LANs.Increase wireless coverageWith round baseOperate with AP/Router with RP SMA connectorSpecification:Frequency Range: 2.4GHzGain: 13dBiImpedance: 50 OhmV.S.W.R: < 1.8:1Connector: SMAPolarization: omni-directionalAntenna length: ~39.5cm, 15.5"Base diameter: ~6.6cm, 2.6"Cable length: ~290cm, 114"Color: as photo shownWeight: 178gPackage contains:1 x Wireless SMA Antenna |
|
|
AC ADPT IBM THINKPAD-770 SERIES $74.99 AC ADPT IBM THINKPAD-770 SERIES |
|
|
72W AC ADPT-FOR LENOVO # 02K6699 $52.99 72W AC ADPT-FOR LENOVO # 02K6699 |
|
|
SOMO 650 RPLMNT AC ADPT $33.99 SOMO 650 RPLMNT AC ADPT |
|
|
MODULAR 6C TRIPLEX ADPT IVORY $6.99 MODULAR 6C TRIPLEX ADPT IVORY |
|
|
Adpt F Jack To Bnc Jack $11.99 ADPT F JACK TO BNC JACK |
|
|
DMS-59 TO DUAL DISP PT-ADPT $42.99 DMS-59 TO DUAL DISP PT-ADPT |
|
|
D100 Savi Adpt Dect 6.0 $85.99 D100 SAVI ADPT DECT 6.0 |
|
|
MOBILE CARD READER & ADPT-KIT $18.99 MOBILE CARD READER & ADPT-KIT |
|
|
Adpt Rj45 Plug/Rj11 Jack-2 Pieces $15.99 ADPT RJ45 PLUG/RJ11 JACK-2 PIECES |
|
|
Adpt Rj45 Plug Bnc Jack $11.99 ADPT RJ45 PLUG BNC JACK |
|
|
2.4GHz 8dBi SMA Directional Antenna with Stand for WiFi/Wireless Network $10.9 - Increase the signal strength and performance of your wireless router or WLAN PCI card with this high gain 8dBi antenna- 2.4GHz high gain networking antenna- Frequency range: 2400MHz- 8dBi directional-Directional for improving range and performance- Gold plated and nickel plated Contacts- Supplied with SMA female connection- VSWR: |
|
|
Nrpsma1Mm - Startech.Com 1 Ft N-Male To Rp-Sma Wireless Antenna Adapter Cable $20.87 This Durable N Male to Rp-sma Wireless Antenna Pigtail Adapter Cable Converts an Rp-sma Type Connector to an N Male Connector._x000d_ Compatible With Startech.com Routers, Access Points And Pci Cards as Well as Belkin, Compaq, D-link, Intel, Netgear, Linksys & Siemens Wireless Networking Devices, The N Male to Rp-sma Wireless Antenna Pigtail Cable is Backed by Startech.com's Lifetime Warranty. [2711909] UPC: 065030803663 UNSPC: 26121609 9.9L x 4.3W x 0.25H 0.1 LB |
|
|
Modular Bay Batt Adpt Kit-T4310 T4410 T5010 $47.99 MODULAR BAY BATT ADPT KIT |
|
|
2.4GHz 9dBi SMA Omni Antenna with Stand for WiFi/Wireless Network $9.3 - Increase the signal strength and performance of your wireless router or WLAN PCI card with this high gain 9dBi antenna- 2.4GHz high gain networking antenna- 9dBi Omni-Directional for improving range and performance- Gold plated and nickel plated contacts- Supplied with SMA female connection- Dock station cable length: 140cm- Package included:- 1 * 9dbi antenna- 1 * Stand |
|
|
2.4GHz 8dBi SMA High Gain Dish Directional Antenna for WiFi / Wireless Network (2400-2483MHZ) $9.16 - Increase the signal strength and performance of your wireless router or WLAN PCI card with this high gain 8dBi antenna- 8dBi directional for improving distance and performance- Gold plated contactor- Supplied with RP SMA Male connection- Frequency Range: 2.4-2.4835GHz- Nominal impedance: 50ohm- Low loss cable: 3.3ft |
|
|
2.4GHz 8dBi SMA High Gain Directional Panel Antenna for WiFi/Wireless Network $13.3 - Increase the signal strength and performance of your wireless router or WLAN PCI card with this high gain 8dBi antenna- 8dBi directional for improving distance and performance- Supplied with SMA Male connection- V.S.W.R < 1.5:1SpecificationsDimensions: 3.66 in x 2.76 in x 0.47 inWeight: 1.9 oz |
|
|
2.4GHz 3dBi SMA Omni Antenna with Stand for WiFi/Wireless Network (2400~2500MHz) $4.2 - Increase the signal strength and performance of your wireless router or WLAN PCI card with this high gain 3dBi antenna- 2.4GHz high gain networking antenna- Frequency range: 2400-2500 MHz- 3dB Omni-Directional for improving range and performance- Gold plated and nickel plated Contacts- Supplied with SMA female connection- VSWR: |
|
|
Audiovox SMA ANT1400 $23.51 Audiovox SMA ANT1400 |
|
|
RANGEPLUS NB ADPT-WLS USB2.0 802.11G $33.99 RANGEPLUS NB ADPT-WLS USB2.0 802.11G |
|
|
KPMG AC ADPT 3104804 QUOTE# 141245175 $96 KPMG AC ADPT 3104804 QUOTE# 141245175 |
|
|
ENTO EDGE AC POWER ADPT REPL 100-96000 $41.99 ENTO EDGE AC POWER ADPT REPL 100-96000 |
|
|
SIIG ADPT IDE TO SATA HDD ADAPTER $28.02 SIIG ADPT IDE TO SATA HDD ADAPTER |
|
|
ADPT DVI Adapter mini-display (M) $28.03 ADPT DVI Adapter mini-display (M) |