Link Lan Adapter

Common Windows Error Codes and How to Fix them!

Below is a list of the most common error codes that you an face while using Windows and its basic components. Some solutions have been provided for you to try to solve them. You should also note that some require the assistance of a computer technician and you should NOT try to fix them yourself as they could seriously damage your computer system.

• Error #0

Error Message: Connection Successful!
Solution: Does not require any repairs.

• Error #2

Error Message: System cannot find specified file
Solution: You should reinstall NCP & DUN

• Error #5

Error Message: Access Denied
Solution:
1. Ensure that you have entered the right username and password in the field labeled â€oedomain†for NT/2k.
2. Check that the option "accept any authentication including clear text" is activated.

• Error #5

Error Message: Invalid Procedure Call
Solution: Dialup and Network components must be installed again

• Error #6

Error Message: Stack Overflow
Solution:
1. Try cold booting your computer.
2. If this does not work, the problem might come from your RAM or the Swap file.

• Error #20

Error Message: The system cannot find the specified device
Solution:
1. Ensure that the right modem has been selected.
2. If it does not respond, try to reinstall it.
3. You can also try to reinstall NCP/DUN/RAS.

• Error #71

Error Message: No more connections is allowed
Solution:
1. Someone else might have connected under your account.
2. If you have been ghosted on the server, your Internet Service Provider can bump the ghost program off.

• Error #380

Error Message: Invalid Proper Value
Solution:
1. Autodial should be pointed to the correct dialer.
2. Else, set up the dialer again.

• Error #600

Error Message: An operation is pending
Solution:
1. You should first try to reboot your computer.
2. Ensure that no other program is using your modem.
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem.
4. Make sure that your computer is Spyware free.

• Error #601

Error Message: The port handle is invalid
Solution:
1. Select the modem's COM port and under the Diagnosis section, open More InfoYou should reboot your computer if you are able to get Ati# responses. Hence, remove the erroneous init string or enter ATZ as the init.
2. You can also reinstall your modem
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem.
4. Your Dialup Networking should be installed again together with its components
5. Your modem might not be working properly. You should then consult your computer manufacturer.

• Error #602

Error Message: The port is already open
Solution:
1. Try to reboot your computer
2. Ensure that no other program is using the modem
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem
4. Try uninstalling the AOL Adapters in the Network Control panel and reboot your computer. Install your Dialup Adapter again.
5. Remove the erroneous init string or enter ATZ as the init.
6. If you have Quicken 2000, deactivate the Quicken Download Manager.
7. You should maybe install your modem again.
8. Make sure that your computer is Spyware free.

• Error #603

Error Message: Caller's buffer is too small
Solution:
1. Ensure that your port speed is not configured to a low speed
2. In your â€oePort Settings†, ensure that FIFO is not set to low.
3. Your Dialup Networking should perhaps be installed again together with its components
4. If you are still having problems, contact your computer manufacturer.

• Error #604

Error Message: Wrong information specified.
Solution:
1. Ensure that the are no outages within your area
2. Try to enter the username and password again
3. Set up the dialer again
4. Your Dialup Networking should be installed again together with its components
5. You can also try to reinstall your modem

• Error #605

Error Message: Cannot set port information.
Solution:
1. Ensure that the are no outages within your area
2. Try to enter the username and password again
3. Set up the dialer again
4. Your Dialup Networking should be installed again together with its components
5. You can also try to reinstall your modem

• Error #606

Error Message: The port is not connected.
Solution:
1. Select the modemâ€(TM)s COM port and under the Diagnosis section, open â€oeMore Info†. You should reboot your computer if you are able to get Ati# responses. Hence, remove the erroneous init string or enter ATZ as the init.
2. You can also reinstall your modem
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem.
4. Your modem might not be working properly. You should then consult your computer manufacturer if the problem persists.

• Error #607

Error Message: The event is invalid.
Solution:
1. If this problem arises while dialing up to the internet, verify that the settings of the event log have been correctly set.
2. Try rebooting your system and ensure that the dialer/network settings have been correctly configured
3. Else, install RAS/DUN again.

• Error #608

Error Message: The device does not exist.
Solution:
1. Check that the right modem is set in the dialer
2. Ensure that you are using the right modem drivers by checking the modem diagnostics. If it's not the case, set up the correct drivers.
3. Remove and install the dialer again
4. Your modem might not be working properly; try to install it again.
5. You should then consult your computer manufacturer if the problem persists.

• Error #609

Error Message: The device type does not exist.
Solution:
1. Check that the right modem is selected in the dialer
2. Ensure that you are using the right modem drivers by checking the modem diagnostics. If itâ€(TM)s not the case, set up the correct drivers.
3. Your modem might not be working properly; try to install it again.
4. You should then consult your computer manufacturer if the problem persists.

• Error #610

Error Message: The buffer is invalid.
Solution:
1. Ensure that your port speed is set to low in the modem properties.
2. In your â€oePort Settings†, check that FIFO is not set to low.
3. Remove and install the dialer again.
4. Else, install RAS/DUN again.
5. You should then consult your computer manufacturer if the problem persists.

• Error #611

Error Message: The route is not available.
Solution:
1. Try to reboot your computer
2. Ensure that you set the right configurations for the dialer and network settings.
3. Else, install the network components again.
4. If you are using a LAN connection, consult your system administrator.

• Error #612

Error Message: The route is not allocated.
Solution:
1. Reboot your computer
2. Ensure that you set the right configurations for the dialer and network settings.

• Error #613

Error Message: Invalid compression specified.
Solution:
1. Try to reboot your computer
2. Else, add &K3 to the extra settings.
3. If this still does not solve the problem, add &K3
4. You can also try to reinstall the modem.

• Error #614

Error Message: Out of buffers.
Solution:
1. Ensure that our port speed is not too low.
2. Try to install your modem again.

• Error #615

Error Message: The port was not found.
Solution: Try to install your modem drivers.

• Error #616

Error Message: An asynchronous request is pending.
Solution:
1. Reboot your computer.
2. Try to install your modem drivers again.

• Error #617

Error Message: The port or device is already disconnecting
Solution:
1. Wait until your modem disconnects properly.
2. If this operation is taking too long, reboot your computer.

• Error #618

Error Message: The port is not open.
Solution:
1. Reboot your computer
2. Ensure that no other program is making use of the modem.

• Error #619

Error Message: The port is disconnected.
Solution:
1. Reboot your computer
2. Ensure that no other program is making use of the modem.

• Error #621

Error Message: Cannot open the phone book file.
Solution: Install Blue Frog connection software again.

• Error #622

Error Message: Cannot load the phone book file.
Solution: Install Blue Frog connection software again

• Error #623

Error Message: Cannot find the book entry.
Solution: Install Blue Frog connection software again

• Error #626

Error Message: Cannot load a string
Solution:
1. Try to reboot your system.
2. Install Blue Frog connection software again

• Error #627

Error Message: Cannot find key
Solution: Install Blue Frog connection software again

• Error #628

Error Message: The port was disconnected
Solution:
1. Install Blue Frog connection software again
2. Try to install your modem drivers again.

• Error #629

Error Message: The port was disconnected by the remote machine.
Solution:
1. Install Blue Frog connection software again
2. Try to enter an alternate Access Number
3. Try to install your modem drivers again.

• Error #630

Error Message: The port was disconnected due to hardware failure.
Solution:
1. Install Blue Frog connection software again
2. Try to reinstall your modem drivers.
3. Try to use an alternate modem.
4. Else, replace your current modem with a new one.

• Error #631

Error Message: The port was disconnected by the user.
Solution:
1. Ensure that the right Access Number is being dialed.
2. Try to reboot your computer.

• Error #632

Error Message: The structure size is incorrect.
Solution:
1. Try to reboot your computer
2. Install Blue Frog connection software again

• Error #633

Error Message: The port is already in use or is not configured for Remote Access dialout.
Solution:
Try to reboot your computer
Else try to reinstall your modem drivers.

• Error #634

Error Message: Cannot register your computer on the remote network
Solution:
Try to check your network settings and modify your computer name.
Install the network control panel again.

• Error #635

Error Message: Unknown Error
Solution:
1. Try to reboot your computer
2. Install Blue Frog connection software again
3. Else try to reinstall your modem drivers.

• Error #636

Error Message: The wrong device is attached to the port
Solution: Check in your settings if you have chosen the right modem.

• Error #637

Error Message: The string could not be converted
Solution:
Try to reboot your computer
Install Blue Frog connection software again

• Error #638

Error Message: The request has timed out.
Solution:
Try to reboot your computer
Install Blue Frog connection software again

• Error #645

Error Message: Internal authentication error.
Solution:
1. Try to reboot your computer
2. Install Blue Frog connection software again
3. Else try to reinstall your modem drivers.

• Error #650

Error Message: The Remote Access server is not responding.
Solution:
Check that your connection and network settings have correctly been configured.
Ensure that the modem has been correctly set up and look for updated drivers.
Set FIFO buffers to a lower speed and ensure that you have unchecked the option "Only connect at this speed".

• Error #676

Error Message: The line is busy
Solution: Ensure that your Access Number is still active and is correctly dialed.

• Error #678

Error Message: There is no answer.
Solution:
1. First of all check that your phone lines are correctly plugged in.
2. Ensure that the Access Number is correct
3. Else, try another Access number
4. If you are trying to make use of your connection in a bad weather, this might be the source of the problem. Wait until it calms down and try again.
5. Else, install your modem drivers again.
6. If the problem persists, you might need to contact your ISP.

• Error #680

Error Message: There is no dial tone.
Solution:
First of all check that your phone lines are correctly plugged in.
The phone lines might be damaged. Replace them and try again.
Else, install your modem drivers again.
If the problem persists, you might need to contact your ISP or a technician.

• Error #691

Error Message: Access denied because username and/or password is invalid on the domain.
Solution:
1. Ensure that you have entered the right username and password.
2. Make sure that your account is active and turned on.
3. You might also try to enter another Access Number.
4. If the problem persists, you might need to contact your ISP.

• Error #692

Error Message: Hardware failure in port or attached device.
Solution:
Browse for and remove any Blue Frog init strings.
Install Blue Frog connection software again
Else, install your modem drivers again.

• Error #718

Error Message: PPP Timeout
Solution:
1. Try to reboot your computer
2. Ensure that you have entered the right username and password
3. You might try another Access Number
4. Install Blue Frog connection software again
5. Else, install your modem drivers again.

• Error #721

Error Message: Remote PPP peer is not responding.
Solution: For Windows 2000/XP/Vista operating systems, ensure that the security setting for the dialer reads "Allow unsecured Password"

• Error #734

Error Message: The PPP link control protocol terminated.
Solution: For Windows 2000/XP/Vista operating systems, ensure that the security setting for the dialer reads â€oeAllow unsecured Passwordâ€

• Error #777

Error Message: The connection attempt failed because the modem on the remote computer is out of order.
Solution:
1. Install Blue Frog connection software again
2. Try an alternate modem
3. Install your modem drivers again
4. Else, install a new modem

• Error #778

Error Message: It was not possible to verify the identity of the server.
Solution:
1. Ensure that you are dialing the correct phone number
2. Verify the connection and Network settings
3. ensure that you do not have any outrage on the phone number
4. Ensure that you have correctly installed your modem and check for updated drivers.
5. Set FIFO buffers to a lower speed and ensure that you have unchecked the option "Only connect at this speed".

• Error #779

Error Message: To dial out using this connection, you must use a smart card.
Solution:
1. Ensure that all auth is allowed in your connection settings in the Security section.
2. Verify that you have correctly set the other dialer settings.
3. Else, create the dialer again.
4. You might need to use the Smart Card Reader as initially setup by the Network Administrator.

• Error #780

Error Message: An attempted function is not valid for this connection.
Solution: Ensure that the dialer, not the one set up for LAN use though, has been properly installed and has the right settings.

• Error #781

Error Message: The encryption attempt failed because no valid certificate was found.
NOTE: The solution for the following problems is already provided in the error messages. If you are still facing problems with them, either contact your ISP or a technician to fix the problem.

• Error #782

Error Message: Network Address Translation (NAT) is currently installed as a routing protocol, and must be removed before enabling Internet Connection Sharing

• Error #783

Error Message: Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.

• Error #784

Error Message: You cannot dial using this connection at logon time, because it is configured to use a user name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the user name on the smart card.

• Error #785

Error Message: You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card.

• Error #786

Error Message: The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.

• Error #787

Error Message: The L2TP connection attempt failed because the security layer could not authenticate the remote computer.

• Error #788

Error Message: The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.

• Error #789

Error Message: The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.

• Error #790

Error Message: The L2TP connection attempt failed because certificate validation on the remote computer failed.

• Error #791

Error Message: The L2TP connection attempt failed because security policy for the connection was not found.

• Error #792

Error Message: The L2TP connection attempt failed because security negotiation timed out.

• Error #793

Error Message: The L2TP connection attempt failed because an error occurred while negotiating security.

• Error #794

Error Message: The Framed Protocol RADIUS attribute for this user is not PPP.

• Error #795

Error Message: The Tunnel Type RADIUS attribute for this user is not correct.

• Error #796

Error Message: The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.

• Error #797

Error Message: A connection to the remote computer could not be established because the modem was not found or was busy.

• Error #798

Error Message: A certificate could not be found that can be used with this Extensible Authentication Protocol.

• Error #799

Error Message: Internet Connection Sharing (ICS) cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1

• Error #800

Error Message: Unable to establish the VPN connection. The VPN server may be un-reachable, or security parameters may not be configured properly for this connection
Solution:
1. Check your ADSL line as it is probably not synched.
2. Verify that your Security Options are correctly set in your connection options.
3. Either your Network Card or your modem might not work properly. Contact a technician if the problem persists.

• Error #995

Error Message: Operation aborted.

• Error #1382

Error Message: Maximum length exceeded.

• Error #1793

Error Message: Account expired.

• Error #2250

Error Message: Network connection does not exist.

About the Author

D-Link 150Mbps 802.11n Wireless LAN USB 2.0 Adapter DWA-130 $21.36 D-Link 150Mbps 802.11n Wireless LAN USB 2.0 Adapter DWA-130

D-Link Rangebooster 108Mbps 802.11g Wireless LAN USB 2.0 Adapter WUA-2340 $6 D-Link Rangebooster 108Mbps 802.11g Wireless LAN USB 2.0 Adapter WUA-2340

D-Link Xtreme N DWA-552 300Mbps 802.11n Wireless LAN Low Profile PCI Adapter w/3 Antennas $39.75 D-Link Xtreme N DWA-552 300Mbps 802.11n Wireless LAN Low Profile PCI Adapter w/3 Antennas

D-Link Rangebooster WUA-2340 108Mbps 802.11g Wireless LAN USB 2.0 Adapter $5.25 D-Link Rangebooster WUA-2340 108Mbps 802.11g Wireless LAN USB 2.0 Adapter

TP-Link TL-WN722N 150Mbps 802.11n Wireless LAN USB 2.0 Adapter w/Quick Secure Setup BTN & 4dBi Antenna $26.45 TP-Link TL-WN722N 150Mbps 802.11n Wireless LAN USB 2.0 Adapter w/Quick Secure Setup BTN & 4dBi Antenna

HP LAN Adapter 1000BASE-SX GigaBit Ethernet LAN Adapter PCI A4926A $49.99 HP LAN Adapter 1000BASE-SX GigaBit Ethernet LAN Adapter PCI A4926A

D-Link Network Adapter $28.99 1 1 Year Limited 1 Year Part - Power Supplies and Fans 1 x RJ-45 10% to 90% Relative Humidity Operating 10/100Base-TX 14°F (-10°C) to 122°F (50°C) Operating 14°F (-10°C) to 158°F (70°C) Storage 4 KB RAM 5% to 90% Storage 90 Part - Spare parts and spare kits 10M Link/Activity 100M Link/Activity DFE-690TXD Fast Ethernet Cardbus Adapter Drivers & Software on CD-ROM Installation Guide IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet ANSI/IEEE 802.3 NWay Auto-Negotiation PCMCIA 2.x Type II 32-bit Cardbus CE Class B FCC Class B VCCI-B MTBF: 419101 hrs Drivers Supported: Windows XP/Me/2000/98SE/98/95, NT 3.51 and NT 4.0 Apple Macintosh 8.x or 9.x NDIS 2.0 for Microsoft LAN Manager for DOS NDIS 2.0 for Microsoft Network Client 3.0 for Workgroup 3.11 Packet Driver for NCSA Packet Driver for WinSock Novell Netware DOS ODI Driver Novell Netware Server v3.12, v4.x and v5.0 Linux 2.2 CSMA/CD Category 5 D-Link D-Link Systems, Inc D-Link's sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link's sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part. D-Link may in its sole discretion replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. DFE-690TXD Ethernet Fast Ethernet Fast Ethernet Card Internal Network Adapter PC Card Type II The D-Link DFE-690TXD is a 10/100Mbps Fast Ethernet 32-bit CardBus adapter for notebooks. With the built-in connector, a RJ-45 LAN cable can be directly plugged into a notebook computer. The DFE-690TXD provides instant connectivity for mobile users. Enabling easy access to a network - users can access databases and resources in diverse environments. The DFE-690TXD adheres to IEEE 802.3 and IEEE 802.3u standards, which specify existing 10BASE-T and 100BASE-TX Ethernet technology suppo

USB Network Lan Adapter for Nintendo Wii $14.99 USB Network Lan Adapter for Nintendo Wii

Casio / WRLS LAN ADAPTER CONNECTS TO / YW-2L $104.12 Casio - WRLS LAN ADAPTER CONNECTS TO - YW-2L

Samsung Linkstick Wireless LAN Adapter WIS12ABGN $69 Samsung Linkstick Wireless LAN Adapter WIS12ABGN

TP-LINK TG-3468 PCI-Express Network Adapter $13.99 Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1q, 802.1p Connectors: 1 x RJ45 LEDs: 1000M Link/Act, 100M Link/Act, 10 Link/Act, Duplex Wake On LAN: Yes Temperature: 0°C ~ 40°C Humidity: 10 % ~ 90 % (Non-condensing) Features: Auto-Negotiation and Auto MDI/MDIX Supports power down/link down power saving DOS/Win98SE/Me/2000/XP/Vista/ Linux/Novell Netware Parts: 1 year limited

EDUP WiFi Link LAN USB Adapter / Dongle for Wireless Internet Play with PSP / NDSL / PS3 / Wii $18.46 - Connect your PSP/NDSL/PS3/Wii to the internet, play online games, organize your files and surf the net from almost anywhere in the house. - Very simple to make it work. Just plug the WiFi Link adapter into your internet-enabled PC to create a Wireless Access Point. Then using a wireless internet connection play online-enabled multiplayer games with PS3/PSP/NDSL/Wii games from all over the world. - If you have other WiFi-enabled devices capable of using the internet, such as laptops or PDAs, you can take them online with WiFi LINK too- Support Win98/ME/2K/XP/Vista/Linux/Mac- A driver CD included

D-Link DFE-530TX+ PCI Fast Ethernet Adapter $14.99 Standards: IEEE802.3, IEEE802.3u, IEEE802.3x Connectors: 1 x RJ45 BUS: 32-bit PCI 2.2 LEDs: Link, Activity Wake On LAN: Yes Dimensions: 4.9" x 4.8" x 0.5" Weight: 0.3 lbs. Temperature: -10°C to 55°C

USB LAN Adapter for Wii $16.6 - Creates a high-speed LAN Internet connection for your Nintendo Wii- No wireless network required- Connects to your existing PC connection or DSL modem- USB 2.0 connection supports the Wii at full speedProduct description And measurementsThe Wii LAN adapter is required to connect the Wii console to a wired access point, such as a broadband modem or wired router.Product features:Requirements to connect the Wii console online with a wired connection.In order to connect the Wii console online with a wired connection, you will need following:-A Wii LAN adapter-An active broadband internet connection, such as DSL or Cable-A compatible internet service provider(ISP). some ISPs require a sign-in every time you connect online, or are otherwise incompatible. Contact your ISP for more information.-Either a broadband modem or wired router with an available ethernet port.-An ethernet cable.Item includes:1 x Wii LAN adapter1 x LAN adapter driver1 x User manualDimensions: 3.19 in x 1.38 in x 0.94 inWeight: 6.88 oz

Samsung Wireless Lan Adapter $49.99 Add wireless capabilities to your Samsung HDTV, Blu-ray player, and home theatre system with the Samsung Wireless Lan Adapter. With this wireless internet USB adapter you get instant access to Samsung Apps on your Samsung HDTV screen! The adapter supports IEEE 802.11a/b/g/n and AllShare™ and includes an extension cable. Compatible with 2010-2012 Samsung TVs , Samsung Blu-ray players. UPC: 036725237360 Manufacturer's Part Number: WIS12ABGNX/XXA

D-Link DIR-601 150Mbps 802.11n Wireless LAN/Firewall 4-Ports Router $22.35 D-Link DIR-601 150Mbps 802.11n Wireless LAN/Firewall 4-Ports Router

TP-Link TL-R480T+ 2 WAN + 3 LAN Enterprise Router TL-R480T+ $123.53 TP-Link TL-R480T+ 2 WAN + 3 LAN Enterprise Router TL-R480T+

D-Link DGS-1024D Ethernet Switch - 24 x 10/100/1000Base-T LAN DGS1024D $212.95 D-Link DGS-1024D Ethernet Switch - 24 x 10/100/1000Base-T LAN DGS1024D

Rocketfish LAN Adapter for Nintendo Wii $19.99 Get your Nintendo Wii system connected to the Internet with this LAN adapter. The adapter connects to your existing router with the included 6' Ethernet cable, creating a high-speed LAN Internet connection for your Wii via a USB 2.0 connection. Hop online with no wireless network required and maximize the fun of your Wii system.

Panasonic DYWL10K Wireless LAN Adapter $160.99 Connect the Panasonic DYWL10K Wireless LAN adapter to your VIERA® HDTV or Blu-ray player and enjoy VIERA CAST and other on-line content wirelessly. The adapter simply plugs into the USB terminal of your device and automatically syncs with your Wireless LAN router. The high-sensitivity antenna and 1m USB cable ensure a seamless and stable connection. With the Panasonic DYW10k Wireless LAN Adapter, you have the freedom to setup your home theatre system the way you want-free from unsightly LAN connection wires. UPC: N/A Manufacturer's Part Number: DYWL10K

2 in 1 54Mbps bluetooth WiFi USB Wireless Lan Network Adapter $18.49 Description:This is a 54Mbps USB bluetooth WiFi network dongle adapter for your PC or Laptop2 in 1 USB Adapter adds 802.11b/g and bluetooth V2.0+EDR wireless capabilities to any desktop computerProgrammable DSP based software radio technologyEasily upgrade to future standards such as Weber or UWBbluetooth wireless access up to a radius of 100 Metersbluetooth WiFi Adapter supports most popular OS including Windows 2000/XP/2003/VistaEncryption and authentication ensure safe, secure communicationsOperating Temperature : 0-70'CStorage Temperature : -20-90'CData rate of up to 54MbpsEasy installation and useSize: L9.6 x W2.8 x H1.1cmWeight: 51.2gBluetooth :Bluetooth 2.4GHz~2.4835GHz license-free ISM Band frequency hoppingConnections within ranges up to 100 MetersUSB WiFi bluetooth Adapter connect up to 7 devices in a PacoletClass I bluetooth radioRF module sensitivity : -85dbm at 0.1% Bit Error Rate (BER)Security : encrypted link, authenticationbluetooth profiles support includes: Generic access profile (GAP), Serial port profile (SPP), Object push profile (OPP), File transfer profile (FTP), Dial-up network profile (DUN), Fax profile (FAX), Synchronization Profile(SYNC), Personal Area Network(PAN) ,Basic image Profile(BIP),Headset Profile(HSP), Hardcopy Cable Replacement Profile(HCRP), A2DP (Advanced Audio Distribution Profile),HID Profile(HID)Wireless LAN :2.4GHz ISM band, unlicensed operationIEEE 802.11b/g standard compliantSupport of 64/128-bit WEP encryption and WPA2Operating Frequency / Channel: 2.4-2.47GHzEmission type : Direct Sequence Spread Spectrum (DSSS) TechnologyRF Output Power: 802.11g 54M OFDM@25'C, 14dBmRange: Indoors: Up to 328 feet (100 meters)Data rate: 54MbpsWorking Mode: Infrastructure, Ad-HocPackage includes:1 x 2-in-1 54M bluetooth WiFi Adapter1 x CD driver

USB 2.0 10/100 Ethernet LAN Network RJ45 Adapter $142.95 USB 2.0 10/100 Ethernet LAN Network RJ45 Adapter USB to RJ45 Adapter USB to Ethernet Adapter USB to Lan Adapter

NEW ! Wireless LAN Network Adapter Mini LAN $72.63 1.USB2.0 802.11N 150M MINI WIRELESS LAN 2.IEEE 802.11n(150Mbps), 11g, 11b 3.USB Mini Wireless N/G WIFI

Free Shipping Promotion Mini High Power 150M Wireless-N WiFi Adapter Network Lan Card With D-Link 2dbi Wholesale/Retail $9.37 1.Mini 150M high power wireless wifi adapter network card 2.USB interface,plug and play 3.Antenna can replace

D-Link / D-Link Network Router DSL-520B ADSL2+ Modem Router 10/100 LAN RJ-11 Retail / DSL-520B $62.01 D-Link - D-Link Network Router DSL-520B ADSL2+ Modem Router 10/100 LAN RJ-11 Retail - DSL-520B

Gigabit lan USB 2.0 ethernet adapter $18 1.USB2.0 Gigabit LAN USB to 10/100/1000 Ethernet Adapter 2.Network Standards: IEEE802.3, 802.3u, and 802.3ab 3.LED...

LAN Adapter For Nintendo Wii $19.99 Creates a wired high-speed internet connection to the Wiimote™ The adapter is plugged in the Wii™'s USB port then the adapter is connected to the home network using the included 5' Ethernet cable

D-Link Express EtherNetwork Fast Ethernet PCI Network Adapter $11.99 1 1 x RJ-45 10% to 90% Non-condensing Relative Humidity Operating 10% to 90% Non-condensing Relative Humidity Storage 10/100Base-TX 14°F (-10°C) to 131°F (55°C) Operating 14°F (-10°C) to 158°F (70°C) Storage Link Activity DFE-530TX+ Fast Ethernet PCI Adapter . Drivers & Manual on CD-ROM Installation Guide Wake-On-LAN Cable Standard & Low Profile Brackets Windows XP/Me/2000/98SE/98/95/NT 4.0 Apple Macintosh 9.x or 10.1x NDIS 2.0 for Microsoft LAN Manager for DOS NDIS 2.0 for Microsoft Network Client 3.0 for Workgroup 3.11 Packet Driver Novell Netware DOS ODI Driver Novell Netware Server v3.12, v4.1x and v5.0 Linux Access Method:CSMA/CD MTBF: 176330 hrs PCI Local Bus Master 2.1/2.2 Support Plug-and-Play installation Supports 20/200Mbps in Full Duplex Mode Supports 10/100Mbps in Half Duplex Mode Supports PCI 2.1/2.2 ACPI Power Management Wake-On-LAN (Magic Packet, LinkChg and Microsoft wake-up frame) Compliant to PC 99 Standard Independent 2Kbyte receive and transmit FIFOs IEEE: IEEE 802.3 IEEE 802.3u ANSI/IEEE 802.3 IEEE 802.3x Compliances: CE Class B FCC Class B VCCI-B The D-Link DFE-530TX+ is a 10/100Mbps Fast Ethernet 32bit PCI Adapter for desktops, workstations, and servers. The DFE-530TX+ supports a wide range of operating systems including Macintosh and Windows. Category 5 D-Link D-Link Systems, Inc DFE-530TX Express EtherNetwork Express EtherNetwork Fast Ethernet PCI Network Adapter Fast Ethernet Card Internal Lifetime Limited PCI www.dlink.com

D-Link DGE-530T PCI Gigabit Desktop Adapter $19.99 Standards: IEEE802.3/3u/3ab/3x IEEE 802.1p Priority Tagging IEEE 802.1q VLANs PCI Local Bus Master 2.2 Specifications Universal Bus Support 3.3V Connectors: 1 x RJ45 BUS: 32-bit PCI 2.2 LEDs: Link, Activity Drivers: Windows Server 2008 (x86/x64), Windows Vista (x86/x64), Windows Server 2003 (x86/x64), Windows XP (x86/x64), Windows 2000, WindowsME, Windows 98SE, Windows NT 4.0 Novell NetWare 4.2, 5.x, 6.x Linux Kernel 2.2.x, 2.4.x, 2.6.x DOS ODI Client Driver Mac OS 10.2x, 10.3x NDIS 2 Driver Wake On LAN: Yes Dimensions: 4.72" x 1.97" x 0.6" Weight: 0.1 lbs.

D-Link -Draft-N PCI Adapter $38.13 Wireless der n�chsten Generation! Pre-N von D-Link (11 Jahre Garantie) steht f�r schnelle �bertragungsraten und eine hohe Reichweite. Der DWA-547 ist f�r all diejenigen geeignet, die bereits heute eine High-Performance Netzwerkl�sung f�r Ihren PC suchen!> Leistungsmerkmale:- Kompatibel mit IEEE 802.11b/802.11g 2.4GHz Standard - Bis zu 650% schneller als 802.11g - Ausgestattet mit hochperformanten Antennen, dadurch �bertragung auf mehreren Kan�len gleichzeitig m�glich - Erkennung undRegelung der maximal m�glichen WLAN Performance - Unterst�tzung aller aktueller Verschl�sselungsalgorythmen wie WEP, WPA, WPA2 und 802.11x - Treiber f�r Windows 2000 und Windows XP> Wireless der Zukunft!Mit Wireless N by D-Link starten Sie schon heute mit Vollgas in die Zukunft. Der Wireless N PCI Adapter DWA-547 erm�glicht Daten�bertragungsraten von bis zu 300Mbit. Besonders geeignet f�r Heimnetzwerke und Home Offices k�nnen Sie von nun an Anwendungen und Funktionen kabellos und ohne Einschr�nkungen oder Wartezeiten nutzen. Im Vergleich zu �lteren WLAN Standards erm�glicht Wireless N fast die dreifache Geschwindigkeit und eine bis zu doppelte Reichweite. > Keine Grenzen f�r Ihr NetzwerkSchluss mit Funkl�chern, endlich k�nnen Sie im ganzen Haus im Internet surfen und haben dabei besonders schnellen Datenzugriff. Aufgrund der Drei-Antennen-Technologie erreicht der DWA-547 im Vergleich zu anderen Wireless LAN Standards gr��ere Reichweiten und somit eine h�here Abdeckung der Umgebung.> Einfachste InstallationDer Wireless N PCI Adapter DWA-547 ist besonders leicht zu installieren. Mit dem D-Link Einrichtungs-Assistenten werden Sie Schritt f�r Schritt durch die Installation gef�hrt, ohne fremde Hilfe zu ben�tigen. Der PCI-Adapter ist vollkommen abw�rtskompatibel zu den Standards 802.11b oder 802.11g, ganz gleich von welchem Hersteller, und kann in bereits bestehende Netzwerke m�helosintegriert werden. Der Adapter erkennt und regelt die h�chstm�gliche Wireless Geschwindigkeit und verbindet sich damit zum Access Point oder Router.> Sicherheit f�r Ihr NetzwerkDer DWA-547 unterst�tzt die Wireless-Verschl�sselungsstandards WEP, WPA und WPA2, um Ihre Daten vor unberechtigten Zugriffen zu sch�tzen.

Freeshipping USB 2.0 to RJ45 Lan Ethernet Adapter For Apple Mac Win7 $7.37 Freeshipping USB 2.0 to RJ45 Lan Ethernet Adapter For Apple Mac Win7

USB A Female F to Ethernet LAN RJ45 Male Router Adapter $4.56 USB A Female F to Ethernet LAN RJ45 Male Router Adapter

20G 1500MW Power Wireless LAN RTL8187L USB WiFi Adapter $20 20G 1500MW Power Wireless LAN RTL8187L USB WiFi Adapter

LG-Nortel Elo PCI100T 108Mbps 802.11g Wireless LAN PCI Adapter $17.22 LG-Nortel Elo PCI100T 108Mbps 802.11g Wireless LAN PCI Adapter

This entry was posted on Sunday, February 10th, 2008 at 12:47 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.