Heat Sink Cooling
![]() |
Heating And Cooling With Geothermal Heat Pumps
The term geothermal literally means Earth/Ground (Geo) Heat (thermal). Geothermal, or ground source heat pumps, take advantage of the constant ground or groundwater temperatures. These heat pumps use geothermal energy to heat and/or cool your home.
A refrigerant loop with a compressor extracts heat from one side (the ground) and pumps it to the heating loop in your home. It is essentially the same process that happens in your refrigerator: heat is extracted via a compressor and refrigerant loop from the inside of your refrigerator/freezer and rejected into your house.
In the summer the geothermal heat pump reverses its cycle, if you have an air-conditioning system, and heat from the home is rejected into the ground or ground water.
What makes geothermal heat pumps such a good choice for residential heating and cooling is that they do not depend on outside air temperatures. These heat pumps will heat your home as efficiently on a windy, zero-degree winter day as on a 40-degree day. Provided of course, that your house is well insulated and tight.
Geothermal heat pumps are also a very efficient way for heating and cooling your home. They use 25-50% less energy than conventional heating and cooling systems (Source: US DOE).
Residential applications of geothermal energy systems use water-to-water or water-to-air heat pumps.
Water-to-Water Geothermal Heat Pumps
Water-to-water geothermal heat pumps are generally used for heating only. They replace the gas or oil furnace that you might currently have to heat your home and water with.
It is important to know that heat pumps work most effectively when the temperature difference between the heat source (ground) and heat sink (floor heat or radiators) is small.
Ground temperatures range anywhere from 50 to 75 degF, depending on where you live. This means that geothermal heat pumps are generally not suitable for standard hot water baseboard applications, which are designed for heating water temperatures of 180 degF. Floor heat and low-temperature radiators require water temperatures in the range of 95 to 140 degF.
Some newer heat pump models are now equipped with so-called desuperheaters that can transfer excess heat from the geothermal heat pump compressor to the domestic water heater. Your geothermal heat pump can also effectively and quickly heat water for your bathtub, shower and sinks.
Water-To-Air Geothermal Heat Pumps
These types of ground source heat pumps are generally used when you need air conditioning. The Water is the heat sink, where you reject the heat from the house. The Air is the air that is distributed through your home via ductwork.
Otherwise, these heat pumps function the same way as water-to-water heat pumps. And again, the efficiency of a geothermal heating and cooling system is far better than that of a traditional system.
Important To Know
The first step towards making a geothermal heat pump system be a reliable and efficient heating (and cooling) system for your home is to minimize the heating and cooling requirements with a well-insulated building envelope and strategically placed windows for passive solar gain.
Not only is your first cost reduced, because your system will be smaller. You will also tremendously increase the comfort of your home.
Geothermal heat pump systems are best designed and installed by professionals. It is not recommended to DIY. These systems must meet specific requirements. Especially the piping laid out in the ground, or down to the ground water table, must be designed and installed correctly to ensure that your geothermal heat pump system works as intended.
About the Author
Christiane Perrin is a registered professional HVAC engineer with a passion for the environment. She is excited about the building industry going green and wants to support homeowners on their journey to building and remodeling green homes. http://www.greenandsustainablebuildings.com
|
|
Arctic Cooling / Arctic Cooling MX-2 1.5g Thermal Grease CPU Heat Sink Compound / MX-2-15G $13.42 Arctic Cooling - Arctic Cooling MX-2 1.5g Thermal Grease CPU Heat Sink Compound - MX-2-15G |
|
|
Wizard Video Card Heat Sink Cooling Fan for Nvidia and ATI (2500RPM) $14.59 Overview:Wizard Video Card Heat Sink Cooling Fan for Nvidia and ATI 2500RPMSpecification:Dimensions: 10 x 8.5 x 2.5cmWeight: 0.0864kg |
|
|
Heat Sink $68.51 A heat sink (or heatsink) is an environment or object that absorbs and dissipates heat from another object using thermal contact (either direct or radiant). Heat sinks are used in a wide range of applications wherever efficient heat dissipation is required; major examples include refrigeration, heat engines, cooling electronic devices and lasers. Author: Miller, Frederic P./ Vandome, Agnes F./ McBrewster, John Binding Type: Paperback Number of Pages: 72 Publication Date: 2009/11/24 Language: English Dimensions: 5.98 x 9.01 x 0.17 inches |
|
|
Cooler Master Vortex Plus 92mm CPU Cooling Fan with Heat Sink $29.99 This CPU cooling fan features 4 heat pipes and a direct-contact base to maximize heat conductivity and dissipation efficiency. The 92mm fan spins at speeds up to 2800 rpm for quick cooling. |
|
|
HP Processor Heat Sink and Cooling Fan Assembly 12VDC Brushless Fan xw4600 Series 462784-001 462784001 $81.04 HP Processor Heat Sink and Cooling Fan Assembly 12VDC Brushless Fan xw4600 Series 462784-001 462784001 |
|
|
Arctic Cooling MX-2 4g Thermal Grease CPU Heat Sink Compound OR-MX2-AC-01 $11.29 Arctic Cooling MX-2 4g Thermal Grease CPU Heat Sink Compound OR-MX2-AC-01 |
|
|
Cooler Master 120mm CPU Cooling Fan with Heat Sink $55.99 Keep your computer's components cool with this fan that features a 1800 rpm speed with 69.7 cfm airflow volume for fast, efficient cooling. |
|
|
Cooler Master V6GT 120mm CPU Cooling Fan with Heat Sink $55.99 Keep your computer's components cool with this fan that features DynaLoop bearing technology for long-lasting use. The asymmetrical aluminum fins are densely stacked for optimal cooling. |
|
|
Cooler Master Hyper TX3 92mm CPU Cooling Fan with Heat Sink $19.99 This 92mm fan helps keep your computer's components cool for excellent operation. The 2800 rpm fan speed with 54.8 cfm airflow volume provides fast, efficient cooling. |
|
|
Cooler Master Hyper 212 Plus CPU Cooling Fan with Heat Sink $29.99 This fan helps keep your computer's components cool for excellent operation. The 2000 rpm fan speed with 76.8 cfm airflow volume provides fast, efficient cooling. |
|
|
Arctic Cooling / Arctic Cooling Freezer 7 Pro Rev.2 Copper Core/Aluminum Fin Heat Sink & Fan w/4-Pin Connector for Intel & AMD CPUs / ACFP7-REV2 $35.99 Arctic Cooling - Arctic Cooling Freezer 7 Pro Rev.2 Copper Core/Aluminum Fin Heat Sink & Fan w/4-Pin Connector for Intel & AMD CPUs - ACFP7-REV2 |
|
|
CPU Replacement Cooling Fan Cooler Heat Sink Heatsink for AMD 775 $15.49 Description:This CPU Fan Cooler works excellent in heat dissipation and extends the life and functionality of your computer.It can keep your processor cool with optimal temperature and improve air flow for your CPU.Unique heatsink sheet design, the premium AMD 775 Heatsink works with double efficiency than ordinary fan.CPU Fan Cooler is a must in protecting your valuable data by keeping your CPU coolLow Noise Cooling Master CPU Fan Cooler for AMD has the advantages of Highspeed fan running with low noise levelThis CPU Cooler protects your valuable data efficently by keeping your CPU cool.Fitness: for AMD 755Measurement: 11cm in diameter, 4.8cm in heightWeight: 301g |
|
|
Arctic Cooling Freezer 7 Pro Rev.2 Copper Core/Aluminum Fin Heat Sink & Fan w/4-Pin Connector For Intel & AMD Cpus $30.64 Arctic Cooling Freezer 7 Pro Rev.2 Copper Core/Aluminum Fin Heat Sink & Fan w/4-Pin Connector For Intel & AMD Cpus |
|
|
Microchannel Heat Sink $95.59 In this thesis, analytical, CFD and some experimental studies of microchannel heat sink (MHS) were performed. This thesis develops a closedloop singlephase microchannel cooling system using de ionized water as a coolant fluid for high heat flux integrated circuits. The design, fabrication and closedloop system using MHS, pump, filter and heat exchanger is summarized. A NiCr wire heat source is fabricated as a heater. A copper heat exchanger is designed to dissipate heat from the heated fluid coming out of the MHS. Some experiments were performed in the fabrication of microchannels on a (110) wafer. After the fabrication, MHS was bonded with BOROFLOAT Glass. The parameters in this study include variable flow rates of coolant and power densities of heat source with uniform wall thickness and channel width of the microchannel heat sink. Author: Riaz, Shahi/ Agonafer, Dereje Binding Type: Paperback Number of Pages: 120 Publication Date: 2010/05/27 Language: English Dimensions: 5.98 x 9.01 x 0.28 inches |
|
|
Mini Mute CPU Heat Sink Mini Cooling Fan Cool $23.34 ? Basic Specification Product Name CPU Cooler Bearing Type Hydraumatic Rated Voltage 12 V Rated Current 0.23¡À0.02 Amp Air Flow 43.06 CFM Noise 22dBA Speed 2,200RPM ¡À10% Life 30,000 Hours Dimensions 90(L)x90(W)x25(H)mm Applicable CPU Compatible Intel LGA775 Core 2 DUO Celeron Pentium 4 Pentium D Intel LGA1156 Intel LGA1155 Intel LGA1366 Core i7 Core i5 Core i3 AMD AM2/AM2+/AM3 Sempron Athlon 64 Athlon X2 Phenom 64 Phenom II X6 1035T Package Included 1 x CPU Cooler ? |
|
|
Mini CPU Heat Sink Mini Cooling Fan Cool(Black) $8.02 ? Basic Specification Product Name CPU Cooler Fan Dimensions ?80x25(H)mm Bearing Type Hydraumatic Rated Voltage 12 V Rated Current 0.16¡À0.02 Amp Air Flow 29.61 CFM Noise 22dBA Speed 2,200RPM ¡À10% Life 30,000 Hours Dimensions 126(L)x122(W)x55(H)mm Applicable CPU Compatible Intel LGA775 Core 2 DUO Celeron Pentium 4 AMD AM2 / AM3 / 754 / 939 / 940 Sempron Athlon 64 Athlon X2 Phenom 64 Package Included 1 x CPU Cooler ? |
|
|
Mini CPU Heat Sink Mini Cooling Fan Cool $10.57 ? Basic Specification Product Name CPU Cooler Bearing Type Hydraumatic Rated Voltage 12 V Rated Current 0.21¡À0.02 Amp Air Flow 48CFM Noise 25 dBA¡À10% Speed 2,500RPM ¡À10% Life 30,000 Hours Dimensions 112(L)x110(W)x57(H)mm Applicable CPU Compatible Intel LGA775 Core 2 DUO Celeron Pentium 4 Pentium D Intel LGA1156 Intel LGA1155 Intel LGA1366 Core i7 Core i5 Core i3 AMD754/939/ AM2/AM2+/AM3 Sempron Athlon 64 Athlon X2 Phenom 64 Package Included 1 x CPU Cooler ? |
|
|
Mini Mute CPU Heat Sink Mini Cooling Fan Cooler $18.61 ? Basic Specification Product Name CPU Cooler Bearing Type Hydraumatic Rated Voltage 12 V Rated Current 0.18¡À0.02 Amp Air Flow 35CFM Noise 20 dBA¡À10% Speed 2,200 RPM ¡À10% Life 30,000 Hours Dimensions 113 x 80 x 113mm Applicable CPU Compatible Intel LGA775 Core 2 DUO Celeron Pentium 4 Pentium D Intel LGA1156 Intel LGA1155 Core i7 Core i5 Core i3 AMD 754/939 AM2/AM2+/AM3 Sempron Athlon 64 Athlon X2 Phenom 64 Package Included 1 x CPU Cooler ? |
|
|
Motor Heat Sink(Green) $3 Motor Heat Sink(Green) |
|
|
Motor Heat Sink(Orange) $3 Motor Heat Sink(Orange) |
|
|
Tail motor heat-sink $1.06 Tail motor heat-sink |
|
|
Main motor heat-sink $1.06 Main motor heat-sink |
|
|
IBM Heat Sink 49Y4820 $58.16 IBM Heat Sink 49Y4820 |
|
|
Lenovo Heat Sink 45J9046 $61.58 Lenovo Heat Sink 45J9046 |
|
|
Venom Aluminum Heat Sink Motor Plate Ax10Scorpion $31.46 The Venom Heat Sink Motor Plate is CNC Machined from 6061 Aluminum and then anodized for a durable finish. Finned for optimum motor cooling the Venom Heat Sink Motor Plate includes a spacer and screw to mount it to the optional aluminum chassis plate (VEN4021). All Venom Axial AX10Scorpion Upgrades are on sale now here Get your remote control accessories and parts now here |
|
|
Manifold Microchannel Cooling of Photovoltaic Cells $111.53 Several works have been published on concentration of solar radiation by mirrors or lenses onto smaller size solar panels, which reduce cost and increase conversion efficiency at higher concentration ratio. One of the challenges is active and uniform cooling of high heat flux solar arrays, because conversion efficiency is dependent on device temperatures and drops with increasing temperature. This research is targeted at cooling of small, high concentrated solar cells. Benefits of manifold microchannel are attractive for cooling of electronic devices but have not been studied for cooling of high concentrated solar cells which is the objective of this research, where the microchannel can be microfabricated and etched on the backside of the silicon solar cell to form a sealed heat sink with the manifold fabricated in the silicon substrate. This design not only minimizes the pressure drop, but also maximizes the heat transfer and provides uniform temperature across the device. Author: Kermani, Elnaz Binding Type: Paperback Number of Pages: 78 Publication Date: 2009/07/01 Language: English Dimensions: 9.00 x 6.00 x 0.19 inches |
|
|
Heat sink grease $9.99 Assures proper heat transfer between semiconductor and heat sink. 6.5g. |
|
|
Lenovo R500 Heat Sink 42X4910 $39.92 Lenovo R500 Heat Sink 42X4910 |
|
|
IBM Heat Sink Microprocessor 46C3545 $91.22 IBM Heat Sink Microprocessor 46C3545 |
|
|
HP Itanium Heat Sink A7231-04045 $69.5 HP Itanium Heat Sink A7231-04045 |
|
|
IBM Heat Sink XSeries 39M4329 $8 IBM Heat Sink XSeries 39M4329 |
|
|
IBM Microprocessor Heat Sink 43W0979 $10.22 IBM Microprocessor Heat Sink 43W0979 |
|
|
(5 PCS) Heat Sink Copper Cooling Copper Thermal Copper for Paly Station 3 for PS3 42*42*1MM $13.68 1.Digitally Designed and Precise Fit. 2.Does not Cover Vent Holes. 3.Will not Void Factory Warranty. 4.Will not Fade,Crack |
|
|
SHUTTEL I.C.E COOLING HEAT PIPE FOR SG41J1 & SG41J1-VP ONLY $49.99 SHUTTEL I.C.E COOLING HEAT PIPE FOR SG41J1 & SG41J1-VP ONLY |
|
|
SOLDERING HEAT SINK $3.99 Soldering heat sink. Clips to ICs so you can solder without damage. |
|
|
Universal Northbridge Heat Sink Chipset Cooler $4.72 - Copper coated aluminum material- For universal cooling all kinds of northbridge chipsets- This does not require a fan, thus does not need to be powered, and does not generate noise or vibration. - The Northbridge chipset can be cooled to an optimal temperature without generation of noise. - You can adjust the direction while in installation. So you can prevent the interference with CPU Coolers and other components. |


US $.06





















































































