Genuine Cisco Vwic
![]() |
![]() Genuine Cisco 2811 Router w 2x VWIC 2MFT T1 US $829.99
|
![]() Cisco VWIC 1MFT T1 New Genuine sealed US $11.50
|
![]() Cisco VWIC 2MFT T1 2 Port Multiflex T1 Cisco Genuine US $115.00
|
![]() Cisco VWIC 2MFT T1 VIC WAN Modem genuine used US $40.00
|
![]() We buy New GENUINE Cisco VWIC3 2MFT T1 E1 100 original US $1,799.00
|
![]() We buy New GENUINE Cisco VWIC3 2MFT G703 100 original US $1,999.00
|
![]() We buy New GENUINE Cisco VWIC3 4MFT T1 E1 100 original US $2,699.00
|
![]() LOT OF 4 GENUINE CISCO VWIC 1MFT E1 STEWART MODULES US $219.95
|
![]() GENUINE CISCO VWIC 2MFT T1 DI CARD US $67.50
|
![]() GENUINE CISCO VWIC 2MFT T1 VOICE WAN INTERFACE CARD US $189.99
|
![]() Genuine Cisco VWIC2 1MFT T1 E1 1 Port Multiflex Module US $185.00
|
|
|
Cisco / VWIC 2-Port Multiflex Trunk / VWIC2-2MFT-T1/E1eql $1458.28 Cisco - VWIC 2-Port Multiflex Trunk - VWIC2-2MFT-T1/E1eql |
|
|
Cisco 1 X VIC/VWIC 4 X Pvdm NMHDV2 $1010.64 Cisco 1 X VIC/VWIC 4 X Pvdm NMHDV2 |
|
|
Cisco IP Communications High-Density Digital Voice/Fax 1x VIC/VWIC Network Module NM-HDV2= NMHDV2 $721.93 Cisco IP Communications High-Density Digital Voice/Fax 1x VIC/VWIC Network Module NM-HDV2= NMHDV2 |
|
|
Cisco - Nm-Hdv2= - Cisco Ip Communications High-Density Digital Voice/Fax Network Module - 1 X Vic/Vwic - Network Module $1087.86 network Modules Provide Enterprises, Managed Service Providers, And Service Providers With The Ability To Directly Connect The Public Switched Telephone Network (pstn), Traditional Telephony Equipment Such As Private Branch Exchange (pbx), Key Systems, Analog Telephones, And Fax Machines. Supports A Vic/vwic Slot That Can Be Populated With Either Digital Or Analog/bri Voice/wan Interface Card. Supports A Maximum Of 60 Channels Of Digital Voice, Or Four Channels Of Analog Voice In Medium Complexity Codec. Must Be Used With Up To Four Pvdm2 Packet Fax/voice Dsp Modules. [480972] UPC: 746320832111 UNSPC: 43222600 15.8L x 10.4W x 3.3H 1.85 LB 0.32 Cubes |
|
|
Cisco - Iad2431-1T1E1 - Cisco 2431-1T1E1 Integrated Access Device - 2 X 10/100Base-Tx Lan, 2 X T1/E1 - 1 Compactflash (Cf) Card, 1 Vwic $3088.73 the Cisco Iad2431-1t1e1 is The Next-generation Integrated Voice And Data Services Platform For Service Providers, Building on The Industry-leading Iad2420. The Cisco Iad2431-1t1e1 Offers a Major Leap Forward in Price Performance And Enhanced Software Functions, Such as Cisco Callmanager Express) And Rich Media Gateway Control Protocol (mgcp) Gateway Services, to Cost-effectively Accelerate The Migration From Time-division Multiplexing (tdm) to Voice Over IP (voip). [C77958] UPC: 746320759852 UNSPC: 43222605 20.7L x 17.9W x 6.5H 17.84 LB 1 Cubes |
|
|
Cisco - Nm-2W= - Cisco Network Module - 2 X Wic/Vwic - Network Module $995.79 This Network Module Has 2 Wan Interface Card (wic) Expansion Slots, Supporting All Current Wics And Vwics. [410548] UPC: 746320288406 UNSPC: 43222600 15.75L x 10.5W x 3.25H 1.9 LB |
|
|
Cisco - Nm-1Fe1R2W= - Cisco Network Module - 2 X Wic/Vwic - Network Module $2302.84 This Mixed-media Network Module Has One Full/half Duplex, Auto-sensing 10/100 Ethernet Port, One Full/half Duplex 4/16 Token Ring Port, And 2 Wan Interface Card (wic) Expansion Slots, Supporting All Current Wics And Vwics. [410748] UPC: 746320288383 UNSPC: 43222600 16.25L x 10.25W x 3.25H 1.9 LB 0.25 Cubes |
|
|
Cisco - Nm-Hdv2-1T1/E1= - Cisco Ip Communications High-Density Digital Voice/Fax Network Module - 1 X T1/E1 Wan - 1 X Vic/Vwic - Network Module $1803.03 network Modules Provide Enterprises, Managed Service Providers, And Service Providers With The Ability To Directly Connect The Public Switched Telephone Network (pstn), Traditional Telephony Equipment (such As Private Branch Exchange (pbx), Key Systems, Analog Telephones, And Fax Machines. this Is Includes A Built-in T1/e1 Port And A Vic/vwic Slot That Can Be Fitted With Either Digital Or Analog/bri Voice/wan Interface Cards. Supports A Maximum Of 90 Channels Of Digital Voice, Or 30 Channels Of Digital Voice And Four Channels Of Analog Voice In Medium Complexity Codec. Must Be Used With Up To Four Pvdm2 Packet Fax/voice Dsp Modules. [D68697] UPC: 746320832166 UNSPC: 43222600 14L x 8W x 2.5H 2.25 LB 0.3 Cubes |
|
|
Cisco - Nm-Hdv2-2T1/E1= - Cisco Ip Communications High-Density Digital Voice/Fax Network Module - 2 X T1/E1 Wan - 1 X Vic/Vwic - Network Module $2302.84 network Modules Provide Enterprises, Managed Service Providers, And Service Providers With The Ability To Directly Connect The Public Switched Telephone Network (pstn), Traditional Telephony Equipment (such As Private Branch Exchange (pbx), Key Systems, Analog Telephones, And Fax Machines. this Module Includes Two Built-in T1/e1 Ports And A Vic/vwic Slot That Can Be Fitted With Either Digital Or Analog/bri Voice/wan Interface Cards. Supports A Maximum Of 120 Channels Of Digital Voice, Or 60 Channels Of Digital Voice And Four Channels Of Analog Voice In Medium Complexity Codec. Must Be Used With Up To Four Pvdm2 Packet Fax/voice Dsp Modules. [D68731] UPC: 746320832128 UNSPC: 43222600 16L x 10.5W x 3.25H 2 LB 0.3 Cubes |
|
|
Cisco - Spiad2431-8Fxs - Cisco 2431-8Fxs Integrated Access Device - 1 X 10/100Base-Tx Lan, 1 X T1, 8 X Fxs - 1 Vwic, 1 Compactflash (Cf) Card $1320.95 the Cisco Iad2431-8fxs is The Next-generation Integrated Voice And Data Services Platform For Service Providers, Building on The Industry-leading Iad2420. The Cisco Iad2431-8fxs Offers a Major Leap Forward in Price Performance And Enhanced Software Functions, Such as Cisco Callmanager Express) And Rich Media Gateway Control Protocol (mgcp) Gateway Services, to Cost-effectively Accelerate The Migration From Time-division Multiplexing (tdm) to Voice Over IP (voip). [CK7891] UNSPC: 43222605 1 LB 1 Cubes |
|
|
Cisco 2801 Integrated Services Router $736.99 (1 Total) CompactFlash (CF) Card (2 Total) AIM (2 Total) PVDM (4 Total) Interface Card 1.72" Height x 17.50" Width x 16.50" Depth 100 V AC to 240 V AC 110 V AC 128 MB 13.70 lb 1U 2 220 V AC 2800 2801 2801 Integrated Services Router 384 MB 64 MB 9 2801 Integrated Services Router Cisco 2801 IOS IP BASE Power Cord US (CAB-AC) Rack-mount brackets with screws for 19-inch racks Cable management bracket RJ-45-to-DB-9 console cable Rubber feet for desktop mounting Cisco 2800 Series Integrated Services Router Quick Start Guide Cisco 2800 Integrated Services Router Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide Product Registration card and Cisco.com card CiscoWorks Support Cisco AutoInstall Cisco Router and Security Device Manager (SDM) Refurbished No Returns Cisco IOS Software Warm Reboot 2 slots support HWIC, WIC, VIC, or VWIC type modules 1 slot supports WIC, VIC, or VWIC type modules 1 slot supports VIC or VWIC type modules Cisco 2801 IOS IP BASE Minimum Cisco IOS Software Release: 12.3(8)T On-board encryption The Cisco 2801 provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules. CISCO2801-RF Cisco Cisco Systems, Inc DRAM Desktop Multi Service Router Rack-mountable Twisted Pair Yes www.cisco.com |
|
|
Cisco 2801 Router $1213.99 (2 Total) AIM (2 Total) PVDM (4 Total) Expansion Slot 1 A @ 230 V AC 1.72" Height x 17.50" Width x 16.50" Depth 10% to 85% Non-condensing Operating 100 V AC to 240 V AC 110 V AC 128 MB 1U 2 2 A @ 110 V AC 220 V AC 2800 2801 2801 Router 32°F (0°C) to 104°F (40°C) Operating 384 MB 50 Hz or 60 Hz 64 MB 8 90 Day Limited 2801 Router Cisco 2801 IOS IP BASE Device manager for routers (ROUTER-SDM) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2801 AC power supply (PWR-2801-AC) Power Cord One blue RJ-45-to-DB-9 console cable One DB-9-to-DB-25 modem adapter 19-inch (48.26-cm) rack-mount brackets with bracket screws Cable management bracket with one mounting screw Rubber chassis feet for desktop application Cisco product registration card Cisco 2800 Series and Cisco 3800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2801 IOS IP BASE Cisco Router and Security Device Manager (SDM) Simple Network Management Protocol (SNMP) IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's Minimum Cisco IOS Software release: 12.3(8)T With the Cisco IOS Software Advanced Security feature set, the Cisco 2801 provides a robust array of common security features such as a Cisco IOS Software Firewall, intrusion prevention, IPsec VPN, Secure Shell (SSH) Protocol Version 2.0, and Simple Network Management Protocol (SNMPv3) in one secure solution set Cisco CME is an optional solution embedded in Cisco IOS Software that provides call processing for Cisco IP phones Interface Card Slots: 2 slots support HWIC, WIC, VIC, or VWIC type modules 1 slot supports WIC, VIC, or VWIC type modules 1 slot supports VIC or VWIC type modules Operation Altitude (derate 1.5°C per 1000 ft): 25°C @ 3 km/10 kft 40°C @ sea level The Cisco 2801 provides significant additional value compared to prior generations of C |
|
|
Cisco Voice/Fax Network Module $1516.99 -13°F (-25°C) to 158°F (70°C) Storage 1092352 Hour 2 x Expansion Slot 32°F (0°C) to 104°F (40°C) Operating 5% to 85% Non-condensing Relative Humidity Operating 5% to 95% Non-condensing Relative Humidity Non-operating 90 Limited International Telecommunications Union (ITU) Standard Voice Codecs: G.711 G.729 G.729a/b G.723.1 G.726 G.728 GSM FCC Class B device Maximum Number of Network Modules Allowed : Cisco 2600XM Series multiservice platforms : 1 Cisco 2691 Multiservice Platform: 1 Cisco 3640/A Multiservice Platform : 3 Cisco 3660 Series multiservice platforms: 6 Cisco 3725 Multiservice Access Router: 2 Cisco 3745 Multiservice Access Router: 4 Software and Memory Requirements: Cisco 2600XM Series:"Plus" images Cisco 2691:"Plus" images Cisco 3600 Series:"Plus" images Cisco 3700 Series:"Plus" images Cisco VICs and VWICs required : (Requires at least one Cisco VIC or VWIC (maximum of two) VIC2-2FXS VIC-4FXS/DID VIC2-2FXO VIC2-4FXO VIC2-2E/M VIC-2DID VIC2-2BRI-NT/TE Any VWIC-xMFT-xx Network Management Support: Cisco CallManager Simple Network Management Protocol (SNMP) compliant Manageable via a Management Information Base (MIB) browser CiscoView interface for configuration ConfigMaker NetSys supported Cisco 2600XM Series multiservice platforms Cisco 2691 Multiservice Platform Cisco 3640/A Multiservice Platform Cisco 3660 Series multiservice platforms Cisco 3725 Multiservice Access Router Cisco 3745 Multiservice Access Router IP Telephony Voice Gateway Toll Bypass Voice over Packet Transport Call Control Signaling Telephony Interface Signaling Support Voice Features Voice Port Interfaces Voice Port-Specific Features Fax and Modem Data Features High-Performance Flexible Digital Signal Processor (DSP) Architecture Traditional Circuit-Switched PBX Support Two-slot IP Communications Enhanced Voice/Fax Network Module 3745 - 12.2(15)ZJ 3725 - 12.2(15)ZJ 3660 series - 12.2(15)ZJ 3640 - Not Supported 3620 - Not Supported 2691 - 12.2(15)ZJ 2600XM Series - 12.2 (15)ZJ 2600 series - Not Supported |
|
|
Cisco 2801 Router with Voice Bundle $1716.99 (2 Total) AIM (2 Total) PVDM (4 Total) Expansion Slot 1 A @ 230 V AC 1 x PVDM2-8 Packet Voice/Fax DSP Module 1.72" Height x 17.50" Width x 16.50" Depth 10% to 85% Non-condensing Operating 100 V AC to 240 V AC 110 V AC 128 MB 1U 2 2 A @ 110 V AC 220 V AC 2800 2801 2801 Router with Voice Bundle 32°F (0°C) to 104°F (40°C) Operating 384 MB 50 Hz or 60 Hz 64 MB 8 90 Day Limited 2801 Router Cisco 2801 IOS SP SERVICES Device manager for routers (ROUTER-SDM) 8-Channel Packet Voice/Fax DSP Module (PVDM2-8) 128 to 256MB SODIMM DRAM factory upgrade for the Cisco 2801 (MEM2801-128U256D) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2801 AC power supply (PWR-2801-AC) Power Cord One blue RJ-45-to-DB-9 console cable One DB-9-to-DB-25 modem adapter 19-inch (48.26-cm) rack-mount brackets with bracket screws Cable management bracket with one mounting screw Rubber chassis feet for desktop application Cisco product registration card Cisco 2800 Series and Cisco 3800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2801 IOS SP SERVICES Cisco Router and Security Device Manager (SDM) Simple Network Management Protocol (SNMP) Cisco CallManager Express (CME) IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's Minimum Cisco IOS Software release: 12.3(8)T Multiprotocol Label Switching (MPLS) VPN support Secure Shell (SSH) VPN Hardware Acceleration (on motherboard): DES, 3DES, AES 128, AES 192, and AES 256 Interface Card Slots: 2 slots support HWIC, WIC, VIC, or VWIC type modules 1 slot supports WIC, VIC, or VWIC type modules 1 slot supports VIC or VWIC type modules Operation Altitude (derate 1.5°C per 1000 ft): 25°C @ 3 km/10 kft 40°C @ sea level The Cisco 2801 provides significant additional value compared to prior generations of |
|
|
Cisco 2811 Router $1518.99 (1 Total) NME (2 Total) AIM (2 Total) PVDM (4 Total) HWIC -4°F (-20°C) to 149°F (65°C) Non-operating 1 A @ 230 V AC 1.75" Height x 17.25" Width x 16.40" Depth 100 V AC to 240 V AC 110 V AC 1U 2 2 A @ 110 V AC 220 V AC 256 MB 2800 2811 2811 Router 32°F (0°C) to 104°F (40°C) Operating 5% to 95% Non-condensing Operating 50 Hz or 60 Hz 64 MB 760 MB 9 90 Day Limited 2811 Router Power Cord, 110V (CAB-AC) Cisco 2800 IOS IP BASE Device manager for routers (ROUTER-SDM) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) Cisco 2811 AC power supply (PWR-2811-AC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access One pair of rack-mount brackets with screws for 19-inch racks Cisco Product Registration Card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2800 IOS IP BASE Cisco Router and Security Device Manager (SDM) Cisco Call Manager Express (CME) Simple Network Management Protocol (SNMPv3) IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's Minimum Cisco IOS Software release: 12.3(8)T The Cisco 2811 provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series. Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RP |
|
|
CISCO VWIC2-1MFT-T1/E1= 1-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card $889 Connectors: 1 x RJ-48C T1/E1 WAN Features: Compatibility: Cisco 2600XM series, Cisco 2691, Cisco 2800 series, Cisco 3700 series, and Cisco 3800 series routers Cisco 1700 Series Modular Access Routers The card include an integrated data service unit/channel service unit (DSU/CSU) Shielded cables STP Cat 5 should be used on E1 ports Full support for T1 Facility Data Link (FDL) Controller local loopbacks Controller remote loopbacks Firmware to support T1 and E1 Layer 1 homologation User-initiated VWIC reset and field-programmable gate array (FPGA) download Voice support (includes DS0-group and PRI-group configuration) Drop and insert capability MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.... |
|
|
CISCO VWIC2-2MFT-T1/E1= 2-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card $2521 Connectors: 2 x RJ-48C T1/E1 WAN Features: Compatibility: Cisco 2600XM series, Cisco 2691, Cisco 2800 series, Cisco 3700 series, and Cisco 3800 series routers Cisco 1700 Series Modular Access Routers The card include an integrated data service unit/channel service unit (DSU/CSU) Shielded cables STP Cat 5 should be used on E1 ports Full support for T1 Facility Data Link (FDL) Controller local loopbacks Controller remote loopbacks Firmware to support T1 and E1 Layer 1 homologation User-initiated VWIC reset and field-programmable gate array (FPGA) download Voice support (includes DS0-group and PRI-group configuration) Drop and insert capability MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.... |
|
|
Cisco 2851 Router $4075.99 (1 Total) EVM (1 Total) NME (2 Total) AIM (3 Total) PVDM (4 Total) Expansion Slot -4°F (-20°C) to 149°F (65°C) Non-operating 1 GB 100 V AC to 240 V AC 11 110 V AC 2 2 A @ 230 V AC 220 V AC 256 MB 2800 2851 2851 Router 2U 3 A @ 110 V AC 3.50" Height x 17.25" Width x 16.40" Depth 32°F (0°C) to 104°F (40°C) Operating 5% to 95% Non-condensing Operating 50 Hz or 60 Hz 64 MB 90 Day Limited 2851 Router Cisco 2800 IOS IP BASE Device manager for routers (ROUTER-SDM) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) Cisco 2821/51 AC power supply (PWR-2821-51-AC) Power Cord, 110V (CAB-AC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access One pair of rack-mount brackets with screws for 19-inch racks Cisco Product Registration Card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2800 IOS IP BASE Cisco CME is an optional solution embedded in Cisco IOS Software that provides call processing for Cisco IP phones AC input surge current: 50A maximum, one cycle (-48V power included) Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: External only, connector for RPS provided by default Operation Altitude (derate 1.5°C per 1000 ft): 27.5°C @ 15 kft 35°C @ 3km/10 kft 40°C @ sea level Cisco Router and Security Device Manager (SDM) Simple Network Management Protocol (SNMP) IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX IEEE 802.3ab: 1000BASE-T USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's Minimum Cisco IOS Software release: 12.3(8)T The Cisco 2851 pro |
|
|
Cisco - Vwic2-1Mft-G703= - Cisco 1-Port Multiflex Trunk G.703 (E1) Voice/Wan Interface Card - 1 X E1 Wan - Voice/Wan Interface Card $1311.46 the Cisco 1-port G.703 (e1) Voice/wan Interface Card Provide Voice And Data Access To The Public Switched Telephone Network (pstn). This Multiflex Trunk Interface Card Is Single-port Trunk Interfaces For Voice, Data, And Integrated Voice And/or Data Applications. This E1 Multiflex Vwic With G.703 Support Allow Unstructured E1 Traffic That Conforms To The Itu-t G.703 Standard. [G11577] UPC: 746320909202 UNSPC: 43222600 15.9L x 10.3W x 2.9H 1.55 LB 0.21 Cubes |
|
|
Cisco - Vwic2-2Mft-G703= - Cisco 2-Port Multiflex Trunk G.703 (E1) Voice/Wan Interface Card - 2 X E1 Wan - Voice/Wan Interface Card $2171.31 the Cisco 2-port G.703 (e1) Voice/wan Interface Card Provide Voice And Data Access To The Public Switched Telephone Network (pstn). This Multiflex Trunk Interface Card Is Single-port Trunk Interfaces For Voice, Data, And Integrated Voice And/or Data Applications. This E1 Multiflex Vwic With G.703 Support Allow Unstructured E1 Traffic That Conforms To The Itu-t G.703 Standard. [G11578] UPC: 746320909219 UNSPC: 43222600 15.9L x 10.4W x 2.8H 1.65 LB 0.05 Cubes |
|
|
Cisco Network Module $953.99 -13°F (-25°C) to 158°F (70°C) Non-operating 1.55" Height x 7.10" Width x 7.20" Depth 15 W Maximum @ 1720096 Hour 2 x WIC/VWIC 2.50 lb Maximum 32°F (0°C) to 104°F (40°C) Operating 5% to 95% Relative Humidity 90 Limited Supported Platforms & Minimum IOS Versions: - 3745 - 12.2(8)T - 3725 - 12.2(8)T - 3660 series - 12.0(7)XK - 3640 - 12.0(7)XK - 3620 - 12.0(7)XK - 2691 - 12.2(8)T1 - 2650 - 12.1(3)T - 2600XM Series - 12.2(8)T1 - 2600 series - 12.0(7)XK - 1720 - Not Available - 1600 series - Not Available Network interfaces: - Compatible with all existing network modules and WICS supported by Cisco 2600/3600 family Cisco Cisco Systems, Inc Data Networking EMI: FCC Part 15 Class B CISPR 22 Class B Regulatory Approvals: UL 1950 Modular Router Solutions: Serial & Legacy Concentration ISDN Concentration Protocols supported: Full Cisco IOS software as of 12.0(7)XK WIC Performance: Up to 8Mb/s per WIC (with just 1 WIC installed) The Maximum Number of NMs that can be utilized in each of the 2600/3600 families is as follows: 2600: 1 2691: 1 3620: 1 3640: 3 3660: 6 3725: 2 3745: 4 Comments: No reliance on other network modules, WAN interface cards, voice interface cards, or advanced integration modules NM-2W= Network Module Not Applicable Not Included This network module has 2 WAN Interface Card (WIC) expansion slots, supporting all current WICs and VWICs. www.cisco.com |
|
|
Cisco 2811 Integrated Services Router $1099.99 (1 Total) CompactFlash (CF) Card (1 Total) NME (2 Total) AIM (2 Total) PVDM (4 Total) HWIC 1.75" Height x 17.25" Width x 16.40" Depth 10 100 V AC to 240 V AC 110 V AC 14 lb 1U 2 220 V AC 256 MB 2800 2811 2811 Integrated Services Router 64 MB 768 MB 2821 Integrated Services Router Cisco 2800 IP BASE W/O CRYPTO (S28NIPB-12403) Power Cord 110V (CAB-AC) Cisco 2811 AC power supply (PWR-2811-AC) 256MB DDR DRAM Memory (MEM2800-256D-INC) 64MB CF Card(MEM2800-64CF-INC) Device manager for routers (ROUTER-SDM) Rack-mount brackets with screws for 19-inch racks Ground lug and two mounting screws Cable management bracket RJ-45-to-DB-9 console cable RJ-45-to-DB-25 modem cable Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2800 Series Integrated Services Routers Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide Product Registration card and Cisco.com card CiscoWorks Support Cisco AutoInstall Cisco Router and Security Device Manager (SDM) Refurbished No Returns 4 Interface card slots, each slot can support HWIC, WIC, VIC, or VWIC type modules 1 Network Module slot, supports NM and NME type modules Cisco IOS Software Warm Reboot Cisco 2800 IP BASE W/O CRYPTO Minimum Cisco IOS Software Release: 12.3(8)T The Cisco 2811 provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules. CISCO2811-RF Cisco Cisco Systems, Inc DRAM Multi Service Router Rack-mountable Twisted Pair Wall-mountable Yes www.cisco.com |
|
|
Cisco EHWIC-D-8ESG-P HWIC - 1 x 1000Base-T LAN $637.99 1 1 Gbps 1 Gbps Gigabit Ethernet 1 x 1000Base-T LAN 1 x RJ-45 1000Base-T Network LAN 1000Base-T Cisco Integrated Services Routers: 3945 3945E 3925 3925E 2951 2921 2911 2901 1941 1921 Cisco interface cards are classified according to the technologies they support. For example, WAN interface cards (WICs) support WAN technologies, such as Gigabit Ethernet, and voice interface cards (VICs) support voice technologies. Voice/WAN interface cards (VWICs) can support voice, data, and voice and data applications, depending on the capabilities of the router in which the VWIC is installed. Enhanced High-speed WAN interface cards (EHWIC) provide expanded LAN and WAN capabilities, such as Gigabit Ethernet and Ethernet switching. Category 5 UTP 1000Base-T Cisco Cisco Systems, Inc Data Networking EHWIC-D-8ESG-P EHWIC-D-8ESG-P HWIC EHWIC-D-8ESG-P= HWIC Wide Area Network www.cisco.com |
|
|
Cisco 2811 Router with DC Power $1833.99 (1 Total) NME (2 Total) AIM (2 Total) PVDM (4 Total) Expansion Slot -4°F (-20°C) to 149°F (65°C) Non-operating 1.75" Height x 17.25" Width x 16.40" Depth 1U 2 24 V DC to 60 V DC 256 MB 2800 2811 2811 Router with DC Power 3 A @ 60 V DC 32°F (0°C) to 104°F (40°C) Operating 5% to 95% Non-condensing Operating 614 BTU/h @ 64 MB 760 MB 8 A @ 24 V DC 9 90 Day Limited 2811 Router Cisco 2800 IOS IP BASE Device manager for routers (ROUTER-SDM) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Blank Network Module Panel (NM-BLANK-PANEL) Cisco 2811 DC power supply (PWR-2811-DC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access One pair of rack-mount brackets with screws for 19-inch racks Cisco product registration card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2800 IOS IP BASE Cisco Router and Security Device Manager (SDM) Simple Network Management Protocol (SNMP) IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's Minimum Cisco IOS Software release: 12.3(8)T With the Cisco IOS Software Advanced Security feature set, the Cisco 2811 provides a robust array of common security features such as a Cisco IOS Software Firewall, intrusion prevention, IPsec VPN, Secure Shell (SSH) Protocol Version 2.0, and Simple Network Management Protocol (SNMPv3) in one secure solution set Startup current: 50A<10 ms Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: External only, connector for RPS provided by default Operation Altitude (derate 1.5°C per 1000 ft): 27.5°C @ 15 kft 35°C @ 3km/10 kft 40°C @ sea level The Cisco 2811 provides significant additional value compared to prior generations of Cisco routers at similar price points by o |
|
|
Cisco 2821 Router with Voice Bundle $2988.99 (1 Total) EVM (1 Total) NME (2 Total) AIM (3 Total) PVDM (4 Total) Expansion Slot -4°F (-20°C) to 149°F (65°C) Non-operating 1 GB 1 x PVDM2-32 Packet Voice/Fax DSP Module 100 V AC to 240 V AC 11 110 V AC 2 2 A @ 230 V AC 220 V AC 256 MB 2800 2821 2821 Router with Voice Bundle 2U 3 A @ 110 V AC 3.50" Height x 17.25" Width x 16.40" Depth 32°F (0°C) to 104°F (40°C) Operating 5% to 95% Non-condensing Operating 50 Hz or 60 Hz 64 MB 90 Day Limited 2821 Router Cisco 2800 IOS SP SERVICES Device manager for routers (ROUTER-SDM) 32-Channel Packet Voice/Fax DSP Module (PVDM2-32) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) Cisco 2821/51 AC power supply (PWR-2821-51-AC) Power Cord, 110V (CAB-AC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access One pair of rack-mount brackets with screws for 19-inch racks Cisco Product Registration Card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2800 IOS SP SERVICES Cisco Router and Security Device Manager (SDM) Simple Network Management Protocol (SNMP) Cisco CallManager Express (CME) IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX IEEE 802.3ab: 1000BASE-T USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's Minimum Cisco IOS Software release: 12.3(8)T Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: External only, connector for RPS provided by default Operation Altitude (derate 1.5°C per 1000 ft): 27.5°C @ 15 kft 35°C @ 3km/10 kft 40°C @ sea level The Cisco 2821 provides significant additional va |
|
|
Cisco 2811 Router with Voice Bundle $2022.99 (1 Total) NME (2 Total) AIM (2 Total) PVDM (4 Total) Expansion Slot -4°F (-20°C) to 149°F (65°C) Non-operating 1 A @ 230 V AC 1 x PVDM2-16 Packet Voice/Fax DSP Module 1.75" Height x 17.25" Width x 16.40" Depth 100 V AC to 240 V AC 110 V AC 1U 2 2 A @ 110 V AC 220 V AC 256 MB 2800 2811 2811 Router with Voice Bundle 32°F (0°C) to 104°F (40°C) Operating 5% to 95% Non-condensing Operating 50 Hz or 60 Hz 64 MB 760 MB 9 90 Day Limited 2811 Router Cisco 2800 IOS SP SERVICES Device manager for routers (ROUTER-SDM) 16-Channel Packet Voice/Fax DSP Module (PVDM2-16) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) Cisco 2811 AC power supply (PWR-2811-AC) Power Cord, 110V (CAB-AC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access One pair of rack-mount brackets with screws for 19-inch racks Cisco Product Registration Card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2800 IOS SP SERVICES Cisco Router and Security Device Manager (SDM) Simple Network Management Protocol (SNMP) Cisco CallManager Express (CME) IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's Minimum Cisco IOS Software release: 12.3(8)T Multiprotocol Label Switching (MPLS) VPN support Network Admissions Control (NAC) Secure Shell (SSH) Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: External only, connector for RPS provided by default Operation Altitude (derate 1.5°C per 1000 ft): 27.5°C @ 15 kft 35°C @ 3km/10 kft 40° |
|
|
Cisco 2851 Router with Voice Bundle $5378.99 (1 Total) EVM (1 Total) NME (2 Total) AIM (3 Total) PVDM (4 Total) Expansion Slot -4°F (-20°C) to 149°F (65°C) Non-operating 1 GB 1 x PVDM2-48 Packet Voice/Fax DSP Module 100 V AC to 240 V AC 11 110 V AC 2 2 A @ 230 V AC 220 V AC 256 MB 2800 2851 2851 Router with Voice Bundle 2U 3 A @ 110 V AC 3.50" Height x 17.25" Width x 16.40" Depth 32°F (0°C) to 104°F (40°C) Operating 5% to 95% Non-condensing Operating 50 Hz or 60 Hz 64 MB 90 Day Limited 2851 Router Cisco 2800 IOS SP SERVICES Feat Lic Survivable Remote Site Telephony up to 24 phones (FL-SRST-SMALL) Feat Lic Survivable Remote Site Telephony up to 48 phones (FL-SRST-MEDIUM) Device manager for routers (ROUTER-SDM) 48-Channel Packet Voice/Fax DSP Module (PVDM2-48) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) Cisco 2821/51 AC power supply (PWR-2821-51-AC) Power Cord, 110V (CAB-AC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access One pair of rack-mount brackets with screws for 19-inch racks Cisco Product Registration Card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide Cisco 2800 IOS SP SERVICES Cisco Router and Security Device Manager (SDM) Simple Network Management Protocol (SNMP) Cisco CallManager Express (CME) IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX IEEE 802.3ab: 1000BASE-T USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's Minimum Cisco IOS Software release: 12.3(8)T Multiprotocol Label Switching (MPLS) VPN support Secure Shell (SSH) Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: External only, connecto |
|
|
Cisco Ethernet with WAN Card Slot Network Module $2021.99 -13°F (-25°C) to 158°F (70°C) Non-operating 1.55" Height x 7.10" Width x 7.20" Depth 10 Mbps 10 Mbps Ethernet Half/Full-duplex 10/100Base-TX 100 Mbps 100 Mbps Fast Ethernet Half/Full-duplex 15 W Maximum 2 2 x 10/100Base-TX LAN 2 x RJ-45 10/100Base-TX Auto-sensing LAN 2 x WIC/VWIC 2.50 lb Minimum 32°F (0°C) to 104°F (40°C) Operating 5% to 95% Relative Humidity 90 Limited IEEE 802.3: 10Base-T IEEE 802.3u: 100Base-T EMI: FCC Part 15 Class B CISPR 22 Class B Regulatory Approvals: UL 1950 Standard Management Information Base (MIBs) Support for up to 8Mb throughput on a WIC interface Full and half duplex Token Ring Support TDM enabled LAN interfaces have 10/100BaseT cables for Ethernet and STP/UTP cables for Token Ring LAN-to-LAN Routing Token ring 4/16 speed indication Ethernet 10/100 Speed Indication Link and full Duplex LEDs Supported Platforms & Minimum IOS Versions: 3745 - 12.2(13)T 3725 - 12.2(13)T 3660 series - 12.2(13)T 2691 - 12.2(13)T Minimum DRAM Memory Requirement: Cisco 2691: 64 MB Cisco 3620: 32 MB Cisco 3640: 32 MB Cisco 3660: 32 MB Cisco 3725: 128 MB Cisco 3745: 128 MB Supported Platforms: 3745 3725 3660 series 2691 3620 3640 This mixed-media network module has two full/half duplex, auto-sensing 10/100 Ethernet ports and 2 WAN Interface Card (WIC) expansion slots, supporting all current WICs and VWICs. The 10/100 Ethernet connections are via an RJ-45 connector. Cisco Cisco Systems, Inc Data Networking Ethernet with WAN Card Slot Network Module NM-2FE2W-V2= Network Module Not Included STP/UTP www.cisco.com |
|
|
Cisco 1Port Multiflex Trunk G.703 E1 VoiceWan Interface Card 1 x E1 x WAN VoiceWAN Interface Card VWIC21MFTG703= $2182.97 The Cisco 1port G.703 (E1) Voice/Wan Interface Card provide voice and data access to the public switched telephone network (PSTN). This multiflex trunk interface card is singleport trunk interfaces for voice data and integrated voice and/or data applications. This E1 multiflex VWIC with G.703 support allow unstructured E1 traffic that conforms to the ITUT G.703 standard. |
|
|
Cisco 1-Port Multiflex Trunk G.703 (E1) Voice/Wan Interface Card $1137.99 -13°F (-25°C) to 158°F (70°C) Storage 1 1 x E1 WAN 1 x RJ-48 E1 WAN 1-Port Multiflex Trunk G.703 (E1) Voice/Wan Interface Card 2.05 Mbps 2.05 Mbps E1 32°F (0°C) to 104°F (40°C) Operating 5% to 85% Non-condensing Relative Humidity Operating 5% to 95% Non-condensing Relative Humidity Non-operating 90 Limited Although unstructured G.703 operation is particular to E1 operation, the VWIC2 card also support structured T1 operation Controller local loopbacks Controller remote loopbacks Integrated CSU/DSU MIB Firmware to support T1 and E1 Layer 1 homologation User-initiated VWIC reset and field-programmable gate array (FPGA) download Voice support (includes DS0-group and PRI-group configuration) MFT VWIC2 has an onboard slot for a multiflex trunk dedicated echo cancellation module Dedicated Echo Cancellation module is not supported on MFT VWIC2 when MFT VWIC2 is used on the Cisco 1751 or 1760 ITU-T G.703 RFC 1406 Supported Router Platforms: 1721 1751 1760 1841 2610XM 2611XM 2620XM 2621XM 2650XM 2651XM 2691 2801 2811 2821 2851 Cisco 3800 series platforms Supported Network Module: NM-HDV2 NM-2W NM-1FE1R2W NM-1FE2W-V2 NM-2FE2W-V2 MIB and Simple Network Management Protocol (SNMP) management The Cisco 1-port G.703 (E1) Voice/Wan Interface Card provide voice and data access to the public switched telephone network (PSTN). This multiflex trunk interface card is single-port trunk interfaces for voice, data, and integrated voice and/or data applications. This E1 multiflex VWIC with G.703 support allow unstructured E1 traffic that conforms to the ITU-T G.703 standard. Cisco Cisco Systems, Inc E1 SNMP VWIC2-1MFT-G703= Voice Voice/WAN Interface Card www.cisco.com |
|
|
Cisco Dual-port RJ-48 Multiflex Trunk-T1 Voice/WAN Interface Card $554.99 1.54 Mbps 1.54 Mbps T1 2 2 x RJ-48C T1/FT1 WAN 2 x T1/FT1 WAN 90 Limited AL LP CD Refurbished No Returns This Multi-Flex Trunk card does not support ISDN data or modem termination in a traditional Network Access Server (NAS) dial scenario LAN-to-LAN Routing Voice & Fax Integration VPN & Firewall Solutions BERT support requires Cisco IOS Software 12.1(1)T or later releases V.54 loopback requires Cisco IOS Software 12.1(1)T or later releases Supported Platforms & Minimum IOS Versions: 2851 - 12.3(8)T4 2821 - 12.3(8)T4 2811 - 12.3(8)T4 3845 - 12.3(11)T 3825 - 12.3(11)T 3745 - 12.2(8)T 3725 - 12.2(8)T 3660 series - 12.0(5)XK 3640 - 12.0(7)XK 3620 - 12.0(7)XK 2691 - 12.2(8)T1 2600XM Series - 12.2(8)T1 2600 series - 12.0(5)XK 1760 - 12.2(4)YB 1751 - 12.2(4)YB 1721 - 12.2(8)YJ Supported Platforms: 2851 2821 2811 3845 3825 3745 3725 3660 series 3640 3620 2691 2600XM Series 2600 series 1760 1751 1721 3631 Catalyst 4000 Catalyst 4224 ICS7750 Supported Carrier Module: NM-1FE2W NM-1FE1R2W NM-2FE2W NM-2W NM-HDV NM-HD-2VE NM-HDV2 AIM-VOICE-30 WS-X4604 AGM This module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a dual-port WAN Interface Card (WIC) for T1/FT1 with an integrated DSU/CSU. For a packet voice solution, the VWIC provides a dual-port Voice Interface Card (VIC) with integrated DSU/CSU, that combines with the Digital T1/E1 Packet Voice Trunk Modules. Cisco Cisco Systems, Inc Dual-port RJ-48 Multiflex Trunk-T1 Voice/WAN Interface Card T1/FT1 VWIC-2MFT-T1 VWIC-2MFT-T1-RF Voice Voice/WAN Interface Card www.cisco.com |
|
|
Cisco $12.99 Michel Keck Cisco - Art Print |
|
|
Cisco High Performance ATM Advanced Integration Module $641.99 -4°F (-20°C) to 149°F (65°C) Non-operating 10% to 85% Non-condensing Relative Humidity Non-operating 10% to 85% Non-condensing Relative Humidity Operating 32°F (0°C) to 104°F (40°C) Operating 90 Limited AIM slot Required Cisco IOS Image: Any Cisco IOS Plus or SP Services Feature Sets Supported Platforms & Minimum IOS Versions: Cisco 2851 - 12.3(8)T4 Cisco 2821 - 12.3(8)T4 Cisco 2811 - 12.3(8)T4 3845 - 12.3(11)T 3825 - 12.3(11)T 3745 - 12.2(11)YT or 12.2(13)T 3725 - 12.2(11)YT or 12.2(13)T 3660 series - 12.2.4T 2691 - 12.2(11)YT or 12.2(13)T 2650 - 12.2.4T 2600XM Series - 12.2(8)T1 2600 series - 12.2.4T ATM Edge Connectivity It requires VWIC-1MFT-T1, VWIC-1MFT-E1, VWIC-2MFT-T1, or VWIC-2MFT-E1 Voice/Wan Inetrface Card All voice interface cards are supported: FXS, FXO, Analog-DID, E&M, and BRI The AIM-ATM supports the following ATM services: Supports up to four ATM T1/E1 ports per AIM, using two 2-port multiflex T1/E1 VWICs in WIC slots, NM-xFE2W, NM-2W, or NM-HDV ATM class of service (CoS) features CBR, VBR-nrt, VBR-rt, ABR, and UBR AAL5: H.323 VoIP, up to four T1/E1 channels of AAL5 (with IMA support) VoATM-AAL2 (trunked only) If used in conjunction with a T1/E1 multiflex trunk voice/WAN interface card (VWIC-MFT) for circuit-mode data and frame-mode data over ATM infrastructures Supports QoS features Permanent virtual circuit (PVC) and switched virtual circuits (SVC) support, where SVC is for data only ATM Forum UNI 3.0, UNI 3.1, and UNI 4.0 LAN Emulation 2.0 Client and Server Per VC queuing for segmentation Support for up to 1024 AAL5 VCs for data/voice features Support for up to1024 AAL2 VCs with up to 255 subchannels each for voice per AIM 1-Kbps resolution for sustained cell rate (SCR) and peak cell rate (PCR) 32-Kbps minimum traffic rate 13-bit range for VPI/VCI per interface Maximum Burst Size (MBS) is up to 255 cells per VC Dynamic management of the cell scheduler table Operations and management (OAM) support (F5) Early Packet Discard AAL5 reassembly time-outs AAL2 subcell multiplexing support H.323 RFC 1483 support for multiple encapsulations over ATM RFC 1577 support for routing over ATM ATM standards: AAL2 AAL5 UNI 3.0 UNI 3.1 UNI 4.0 Supported Platforms: Cisco 2851 Cisco 2821 Cisco 2811 3845 3825 3745 3725 3660 series 2691 2650 2600XM Series 2600 series The AIM-ATM optimizes the Cisco 2600, 2600XM, 2691, 3660 |
|
|
Cisco SFP-OC12-LR1 Real Cisco Cisco Branded SFPOC12LR1 $1484.4 Cisco SFP-OC12-LR1 Real Cisco Cisco Branded SFPOC12LR1 |


US $219.00





























































































