Drive Metal Mount

How To Install An Acer Laptop Hard Drive

How To Install An Acer Laptop Hard Drive

Step 1

Turn off the laptop and eject the battery. To avoid risking injury, you
must shut down the laptop and remove the battery before attempting to
install a new hard drive. This will prevent electricity from traveling
through the laptop while you are working on it. Turn the laptop off
through the Windows operating system and close the lid. Place the laptop upside down on a flat, level
surface so that you can easily access the bottom of the laptop. Remove
the battery by sliding the battery lock---found directly above the
battery compartment---to the "unlocked" position. Open the battery bay
and lift or slide the battery out. Wait until your Acer laptop has cooled off before proceeding to the next step.

**********************************************************************************

Replacement Laptop Battery For ACER Aspire 3000

Specifications

• Part No: Aspire 3000
• Battery Type: Li-ion
• Volt: 14.8 V
• Capacity: 4400mAh
• Weight: 552.83g
• Dimension: 211.40x70.60x22.30mm
• Color: Black
• Promotion Price: AU $84.19 (inc. GST)

************************************************************************************

Step 2

Locate the hard drive compartment and remove the cover. Most Acer store the hard drive in its own compartment near the battery for easy
removal and installation. Check the user guide that came with your
laptop to be sure which compartment contains the hard drive on your
specific Acer model(Aspire 3020). Use a laptop screwdriver to remove the two screws that secure the cover to the laptop, then lift the cover to remove it.

Step 3

Replace the old hard drive with the new one. When you open the hard
drive compartment, you will see a removable metal cage. This is not the
hard drive, but a protective compartment in which the hard drive is
mounted. Carefully lift and pull the right edge of the hard drive cage
to disconnect it from the motherboard. Use a laptop screwdriver to
remove the screws securing the hard drive to the cage. After you remove
the old hard drive, insert the new one into the metal cage, and then
replace the screws. Slide the hard drive cage back into the compartment
to connect it to the motherboard. Replace the hard drive compartment
cover and secure its two screws to complete installation of the hard
drive.

**************************************************************************************

Replacement Laptop Battery For ACER Aspire 5100, acer aspire 5630

Specifications

• Part No: Aspire 5100 Series
• Battery Type: Li-ion
• Volt: 11.1 V
• Capacity: 4400mAh
• Weight: 425.25g
• Dimension: 135.70x89.00x19.30mm
• Color: Black
• Promotion Price: AU $90.72 (inc. GST)

**************************************************************************************

Step 4

Install Windows, software, and Acer drivers and utilities. Insert the
battery back into its compartment and reconnect the laptop's power
cord, cables and peripherals. To use the new hard drive, insert the
recovery disk that came with your Acer laptop(say acer aspire 3610)
to begin the installation of Windows and the drivers and utilities you
need to operate the laptop. This includes drivers and utilities for the
modem, sound card, touchpad and video card. Install any programs and
transfer any files you want stored on the new hard drive.

About the Author

Battery-company.com.au offers high quality replacement laptop batteries, brands as Sony laptop batteries, JVC laptop batteries, Canon laptop batteries, Toshiba laptop batteries...
Digital camera Batteries for Canon, Nikon, Sony, JVC, Kodak, Konica, Minolta, Olympus...

http://www.battery-company.com.au

Body Mount Washer by Crown Automotive $6.99 Jeep CJ (1976-1986); Metal Tube & Washer; Body Mount Washer by Crown Automotive

StarTech BRACKET25 Adapter Kit to Mount 2.5 HDD in 3.5 Drive Bay $9.99 Features: Adapter Kit to Mount 2.5" HDD in 3.5" Drive Bay A metal mounting bracket ensures the drive is reliably secure and provides heat dissipation from the drive

Drive Train Kit for Jeep $123.99 1987-95 Jeep YJ Wrangler;Red;Motor mounts;Transmission mount JEEP WRANGLER (87-95YJ) ISLANDER LAREDO RENEGADE S SAHARA SE SPORT 1987 1988 1989 1990 1991 1992 1993 1994 1995 4.2L (258) 4L Power Tech (242) GAS Drive Train Kit for Jeep

Transmission Mount by Crown Automotive for Jeep $10.99 Mount Transmission Mount by Crown Automotive for Jeep

86653 post mount, metal $1.41 mount metal

NXc; Running Boards for Jeep $276.44 Fits 2006 to 2010 XK Commander;Black top;UltraShine vac metal trim;Requires running board mount kit part number DZ16260 JEEP COMMANDER LIMITED SPORT 2010 3.7L Power-Tech (226) 5.7L Hemi EZD (345) GAS NXc; Running Boards for Jeep

Warrior Shock Mount Conversion $21.99 Universal;Brackets only Warrior Shock Mount Conversion

Pack Mount by Rotopax $24.99 Black powder coated base;Quick and strong way to mount packs Pack Mount by Rotopax

Warrior Universal Shock Mount $27.99 Universal;Made from 1/8 in. steel plate;Folded OE style;Axle mount Warrior Universal Shock Mount

Motor Mount by Crown Automotive for Jeep $45.99 1993-96 Jeep XJ Cherokee;4.0L engine;Right hand drive models;Passenger side motor mount JEEP CHEROKEE (XJ) CLASSIC COUNTRY SE SPORT 1993 1994 1995 1996 4L Power Tech (242) GAS Motor Mount by Crown Automotive for Jeep

Rampage 86619 - Trail Can Utility Tool Box by Rampage $95.99 All metal 14-gauge steel construction;Red powder coat finish;Locking lid to secure contents;Lift out tool tote tray;Two removable drawers;Screw driver storage slots;Non-slip soft liners included;Fits 5 gallon Gerry can mount bracket;Dimensions 18" x 13" x 6" Rampage 86619 - Trail Can Utility Tool Box by Rampage

Shock Mount Kit for Jeep $20.99 #10 thread size;Includes hardware Shock Mount Kit for Jeep

Jeep Control Arm Mount: Rear Genright Control Arm Mount for Jeep $249.99 Control arm mount;Rear;4 link;Frame side;Sold as a pair Jeep Control Arm Mount: Rear Genright Control Arm Mount for Jeep

Shock Absorber Reservoir Mount for Jeep $63.99 Shock Absorber Reservoir Mount;For Fox Resi To 1.5 in. Tube;Clamp Kit;Pair; Shock Absorber Reservoir Mount for Jeep

Engine Mount Insulator by Crown Automotive $52.99 2002-05 Jeep KJ Liberty;3.7L engine;Driverside mount Engine Mount Insulator by Crown Automotive

Rear Transmission Mount by Crown Automotive $42.99 1993-98 Jeep ZJ Grand Cherokee;5.2L Engine;Front trans mount Rear Transmission Mount by Crown Automotive

Pro Mount by Daystar $49.99 Camera mounting system;For tubular cages and roll bars;Fits 7/8", 1-1/2", 1-3/4" and 2" tube Pro Mount by Daystar

DLX Pack Mount by Rotopax $29.99 Black powder coated;Provides extra tightening power DLX Pack Mount by Rotopax

Pack Mount Extension by Rotopax $19.99 Black anodized aluminum;Allows you to stack packs together;Extension only Pack Mount Extension by Rotopax

LOX Pack Mount by Rotopax $39.99 Black anodized aluminum;Locks your Rotopax to mounitng surface;Keys included LOX Pack Mount by Rotopax

Transmission Mount by Crown Automotive $21.99 1997-06 Jeep TJ Wrangler;2.5L or 4.0L engine;AX15 transmission Transmission Mount by Crown Automotive

StarTech BRACKET25 Accessory Adapter Kit to Mount 2.5inch HDD in 3.5inch Drive Bay Retail $23.63 This Drive Bay Mounting Bracket Kit lets you mount a 2.5in hard drive in a 3.5in drive bay allowing you to maximize the internal spaceefficiency of your computer case. A metal mounting bracket ensures the drive is reliably secure and provides heat dissipation from the drive. Includes 40pin to 44pin IDE adapter. Install a 2.5 IDE hard drive into an unused 3.5 bay in a desktop chassis. Turn an unused 2.5 IDE drive into additional storage for a desktop computer. Height: 0.39 in. Length: 3.94 in. Width: 3.86 in.

Tachometer Mount by Joe's Racing Products $19.99 1-3/4 in. clamp;Gray Tachometer Mount by Joe's Racing Products

CNC Metal battery mount $8 CNC Metal battery mount

Front Motor Mount by Crown Automotive $33.99 1993-98 Grand Cherokee;5.2L engine;1998 Grand Cherokee;5.9L engine;Passenger side mount Front Motor Mount by Crown Automotive

Portable Winch Mount $52.99 Portable Winch Mounts;Position: = Portable;Material: = 3/16 Steel;Size: = 14.5 in. x 3.25 in. x 3.25 in.;Light Mounts: = No;Winch Compatible: = Yes;Schackle Mounts: = No;Reciever Hitch: = No;Weight: = 7 lbs.;Application: = Portable Winch Mounts - Class III Receiver Hitch Mount - Portable Winch Mount

Antenna Mount by Tomken for Jeep $26.99 Fits 1987 to 1995 YJ Wrangler;Install on factory spare tire stop;Black powder coat Antenna Mount by Tomken for Jeep

Steering Stabilizer Mount for Jeep $40.99 Steering Stabilizer Mount;Front;Tie Rod Mount;5/8 in. Stud;Bolt On;Includes Bracket;U-Bolts;Hardware;Each; JEEP WRANGLER (07-12JK) ISLANDER MOUNTAIN RUBICON SAHARA SPORT UNLIMITED ISLANDER UNLIMITED MOUNTAIN UNLIMITED RUBICON UNLIMITED SAHARA UNLIMITED SPORT UNLIMITED X X 2007 2008 2009 2010 2011 2012 3.6L (220) 3.8L (231) GAS Steering Stabilizer Mount for Jeep

Floor Mount Firewall Cover by Flaming River for Jeep $54.99 For use with polished floor mount Floor Mount Firewall Cover by Flaming River for Jeep

Shock Mount Stud Kit by Rubicon Express for Jeep $5.99 Shock/Sway bar mount stud kit Shock Mount Stud Kit by Rubicon Express for Jeep

Jeep Control Arm Mount: Front Genright Control Arm Mount for Jeep $209.99 Front;3 link;Frame side;Sold as a pair;Kit includes laser cut and CNC bent brackets and mounts Jeep Control Arm Mount: Front Genright Control Arm Mount for Jeep

GoPro Tripod Mount by GoPro for Jeep $7.99 1 Tripod Mount;Warranty: One Year;Thread Size: standard, 1/4in-20tpi (threads per in.);Construction: polycarbonate;Camera NOT Included; GoPro Tripod Mount by GoPro for Jeep

Engine Mount by Crown Automotive for Jeep $13.99 Motor Mount JEEP CHEROKEE (XJ) CHIEF LAREDO PIONEER 1984 1985 1986 1987 1988 1989 1990 2.5L (150) GAS Engine Mount by Crown Automotive for Jeep

Fairlead Mount by Hanson Offroad for Jeep $68.99 all Hanson bumpers;Standard 4.5 in. x10 in. mount pattern;Can use hawse or roller style fairleads;Sandwiches between bumper and frame Fairlead Mount by Hanson Offroad for Jeep

Warrior License Plate Fairlead Mount $30.99 1955-12 Wrangler and Jeep CJ;Black powder coated;Constructed of 14-gauge HRPO steel plate;Hawse fairlead mount snap brackets;License plate bracket;Mounting hardware Warrior License Plate Fairlead Mount

MO961 - Chrome by Moto Metal $312.39 Moto Metal MO961;20x9, 8 on 6.5 Bolt Pattern;Backspace 5.71 in;Max Load = 2500lbs.;Finish = Triple Chrome Plated;Center Bore 125.5;Offset = 18. MO961 - Chrome by Moto Metal

This entry was posted on Wednesday, March 19th, 2008 at 5:03 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.