Connector End Singlemode
 |
 FIBER OPTIC CABLE CONNECTOR END SINGLEMODE FC 20mm  US $5.99
|
SFP Plus (SFP+) 10 Gbps Interconnect System
SFP+ (Small Form-factor Pluggable Plus) 10 Gbps Interconnect System from Molex supports next-generation speeds of standard SFP applications, with a greater range of options for increased port density
The SFP+ product line of connectors, cages and patch cables takes SFP to the next level. SFP+ interconnects are designed to support applications for 8 Gbps Fibre Channel and 10 Gbps Gigabit Ethernet, as compared to SFP, which is designed to support 1.125 Gbps Fibre Channel and 2.5 Gbps Gigabit Ethernet applications. SFP+ interconnects use the same space-per-port as standard SFP interconnects, therefore providing 11.1 Gbps capability in a space that is 30% smaller than XFP.
The SFP+ interconnect system supports the SFP+ specifications covering 6 different standards, which define data rates ranging from 8.5 to11.1 Gbps. The SFP+ system is commonly referred to as 10 Gbps system although the specification is rated up to 11.1 Gpbs.
The SFP+ host connectors are a key component in Molex's extensive SFP product line. Molex designed the 74441 series to be capable of handling 10 Gbps data rates several years ago. Now, with the launch of SFP+, Molex is well positioned with a host connector that is tooled and in volume production.
The standard SFP host connectors offer excellent signal integrity at 10 Gbps. Thus, a customer using the standard part does not need a board re-spin. Also offered is a new version with a modified housing to protect against a mis-mated module. This offers the same electrical performance as the original host connector. The part numbers for this version are 74441-5001 and -5010.
Watertown, Connecticut — Siemon, a leading global manufacturer of IT network cabling and infrastructure systems, today announced that its high speed interconnect products have passed key 40 and 100 Gigabit Ethernet testing at the Ethernet Alliance's recent Higher Speed Ethernet (HSE) subcommittee interoperability plugfest for IEEE Std. 802.3baTM-2010 40 and 100 Gbps Ethernet.
Hosted by Ixia at its iSimCity lab in Santa Clara, CA and assisted by the University of New Hampshire Interoperability Lab, the plugfest was designed to verify interoperability of 40 Gb/s and 100 Gb/s test equipment, systems, NICs, transceivers and cabling. Testing included Siemon's Moray QSFP active optical and QSFP passive copper cable assemblies, multi-fiber MTP connectorized equipped OM3 and OM4 optical assemblies and singlemode fiber with SC connectors. All Siemon high-speed cable assemblies passed their respective 40 Gb/s and 100 Gb/s interoperability tests.
"The plugfest was instrumental in proving that the higher speed Ethernet ecosystem is ready for deployment," said David Schneider, marketing chair of the EA's Higher Speed Ethernet subcommittee. "Siemon's full line of cables fully interoperated with the transceivers and systems at the plugfest."
"With the SFP Plus recent activity in IEEE 802.3ab, this EA plugfest becomes absolutely crucial in signalling the commercial viability of high-speed Ethernet to the larger network infrastructure market," explained Randy Below, VP of Business Development at Siemon's Interconnect Solutions business unit. "It also allowed Siemon to highlight the breadth of its cabling line. We have end-to end twisted pair and optical fiber systems supporting application speeds up to and beyond 10Gb/s, including category 6A shielded and UTP and fully-shielded category 7A TERA as well as XGLO singlemode and multimode fiber. We can now add fully interoperable 40Gb/s and 100Gb/s Passive twinaxial Copper, Active Optical and Passive Optical interconnects to that list."
Established in 1903, Siemon (http://www.sfplustransceiver.com) is a global industry leader in the development and manufacture of high quality, high-performance network cabling solutions. Siemon's Interconnect Solutions business unit (SIS) specializes in the development of high-speed interconnects. Headquartered in Watertown, Connecticut, USA,SFP Transceiver Siemon operates directly in over 30 countries and, through its channels, services customers in over 100 countries. Siemon offers a comprehensive suite of copper and optical fiber cabling systems. With over 400 patents, Siemon Labs invests heavily in R&D and is actively involved with numerous industry standards organizations around the world.
About the Author
SFPlus Transceiver is a worldwide leading manufacturer & supplier of compatible opticaltransceivers. We hold stock for a full range of transceivers such as SFP Plus (SFP+), X2, XENPAK, XFP, SFP, GBIC.
All our transceivers are 100% compatible with major brands like Cisco, HP, Nortel, Force10, D-link, 3Com, and backed by a lifetime advanced replacement warranty.
We offer international free shipping on orders over US$ 200. Next day delivery is standard and we can customize transceivers to fit your specific requirements.
|
|
TRIPP LITE N35403M 3M Duplex Singlemode 8.3125 $42.84 Tripp Lite s 3meter singlemode duplex fiber optic SC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has ST connectors on one end SC on the other a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.Primary InformationFeaturesnbsp;:nbsp;nbsp;Zipped risernbsp;Left Connector Gendernbsp;:nbsp;nbsp;Malenbsp;Right Connector Gendernbsp;:nbsp;nbsp;Malenbsp;Cable Technologynbsp;:nbsp;nbsp;Fiber opticnbsp;Network Cable Typenbsp;:nbsp;nbsp;Patch Cablenbsp;Left Connector Typenbsp;:nbsp;nbsp;ST single modenbsp;Right Connector Typenbsp;:nbsp;nbsp;SCSinglemodenbsp;DimensionsMiscellaneousLengthnbsp;:nbsp;nbsp;10 feetnbsp;Enclosure Colornbsp;:nbsp;nbsp;Yellownbsp;ServiceSupportService Support Typenbsp;:nbsp;nbsp;Limited lifetime warrantynbsp;UNSPSC CodeUNSPSC Codenbsp;:nbsp;nbsp;26121607nbsp; |
|
|
Tripplite N36805MP 5M Duplex Singlemode 8.3/125 F $91.65 Tripp Lite s 5meter ( 15ft ) Plenum Rated singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end ST connectors on the other and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Plenum cable is used in plenum return air chambers where local fir codes dictate the use of plenum rated cable. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Manufactured from 8.3/125 duplex (zipcord) fiber PLENUM Rated jacket Length: 5meter ( 15ft ) Connectors: 2 LC and 2 ST connectors on each end Insertion loss testing performed on every connector (0.2db typical) and provided with cable Beveled edge on ends of glass makes insertion of plug a breeze Fiber made from glass (not a polymer) Color coded shrouds identify transmit and receive Fiber optic distributed data interface (FDDI) rated OFNR (riser rated) Tripp Lite warrants this product to be free from defects in materials and workmanship for life Applications Networking equipment that requires singlemode fiber optic patch cables as well as Plenum Rated cable System Requirements Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SCconnectors Package Includes 5meter ( 15ft ) Duplex Plenum Rated Singlemode Fiber Patch Cable LC/ST |
|
|
Tripp Lite Singlemode Duplex Patch Cable $30.99 16.40 ft 2 x SC 2 x ST 9/125 µm Any fiber optic hardware or NIC card requiring singlemode duplex cable with SC/ST connectors. FDDI ONFR Singlemode Duplex Patch Cable5-meter Duplex Single mode Fiber Patch Cable, SC/ST Zipcord Insertion loss testing performed on every connector (0.2db typical) and provided with cable Beveled edge on ends of glass makes insertion of plug a breeze Fiber made from glass (not a polymer) Color coded shrouds identify transmit and receive Tripp Lite's 5-meter, single mode duplex fiber optic SC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has ST connectors on one end, SC on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex single mode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Fiber Optic Lifetime N354-05M Network Cable PVC Patch Cable SC ST Singlemode Duplex Patch Cable Tripp Lite www.tripplite.com |
|
|
TRIPP LITE 5m Duplex Singlemode 8.3/125 Fiber Patch N35605M $43.86 Tripp Lite 5meter ( 15 ) singlemode duplex fiber optic SC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on each end a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Cable Type: Fiber Optic. Cable Characteristic: Patch Cable. Core/Cladding Diameter: 9/125 m. Cable Length: 16.40 . Connector on First End: 2 x SC Male. Connector on Second End: 2 x SC Male. Jacket: PVC. Color: Yellow. Package Contents:. Fiber Optic Duplex Patch Cable. 5meter ( 15 ) Duplex Singlemode Fiber Patch Cable SC/SC. Additional Information:. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Duplex singlemode fiber is most commonly used in LAN applications. Certifications and Standards: FDDI. |
|
|
Tripp Lite Singlemode Duplex Patch Cable 16.4ft 2 x LC 2 x LC Patch Cable Singlemode N37005M $55.32 Manufactured from 8.3/125 duplex (zipcord) fiber. PVC jacket. Length: 5meter. Connectors: 2 LC and 2 LC connectors on each end. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive. Fiber optic distributed data interface (FDDI) rated. OFNR (riser rated). Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/LCconnectors. Color: Yellow. Clad Diameter: 125 micron. Core Diameter: 8.3 micron. Fiber Type: Singlemode. Number of Fibers: 2. Intended Application: Computer Networking (Fiber). |
|
|
Tripp Lite Singlemode Duplex Patch Cable 6.56ft 2 x LC 2 x SC Patch Cable Singlemode N36602M $41.8 Manufactured from 8.3/125 duplex (zipcord) fiber. PVC jacket. Connectors: 2 SC and 2 LC connectors on each end. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive. Fiber optic distributed data interface (FDDI) rated. OFNR (riser rated). Clad Diameter: 125 micron. Core Diameter: 8.3 micron. Fiber Type: Singlemode. Number of Fibers: 2. Intended Application: Computer Networking (Fiber). Cable Length (m): 2. Color: Yellow. |
|
|
4-Flat Trailer End Connector $4.99 4-Flat Trailer End Connector. 12 in. |
|
|
TRIPP LITE DUPLEX SINGLEMODE 8.3/125 FIBER N36605M $42.76 Tripp Lite s 5meter singlemode duplex fiber optic LC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on one end LC connectors on the other a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.nbsp;DUPLEX SINGLEMODE 8.3/125 FIBER OPTIC PATCH CABLE LC/SC 5M |
|
|
4-Flat Car End Connector $6.99 4-Flat Car End Connector. Incl. 4 Wire Taps. 48 in. |
|
|
Tripp Lite Fiber Optic Duplex Patch Cable 3.28ft 2 x LC 2 x LC Fiber Optic Duplex Cable Singlemode Yellow N37001M $51.16 Tripp Lite s 1meter ( 3ft ) singlemode duplex fiber optic LC/LC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end LC connectors on the other a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Type: Network Cable. Color: Yellow. Jacket PVC Riser rated. Length 39.37 . Duplex singlemode fiber is most commonly used in LAN applications. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive. |
|
|
Tripp Lite Fiber Optic Duplex Patch Cable 3.28ft 2 x LC 2 x ST Fiber Optic Duplex Cable Singlemode Yellow N36801M $51.29 Tripp Lite s 1meter ( 3ft ) singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end ST connectors on the other a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life. Type: Network Cable. Color: Yellow. Jacket PVC Riser rated. Cable Length: 39.37 . Duplex singlemode fiber is most commonly used in LAN applications. Insertion loss testing performed on every connector (0.2db typical) and provided with cable. Beveled edge on ends of glass makes insertion of plug a breeze. Fiber made from glass (not a polymer). Color coded shrouds identify transmit and receive. |
|
|
4-Flat Knockout Car End Connector $5.99 4-Flat Knockout Car End Connector. 60 in. |
|
|
Tripp Lite 3M Duplex Singlemode 8.3/125. Each $59.4 Manufacturer: Tripp Lite. Each. Tripp Lite's 3-meter, singlemode duplex fiber optic LC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has LC connectors on one end, ST connectors on the other, a PVC jacket, and is FDDI and OFNR rated. |
|
|
Of-500-S - Fluke Networks Optifiber Of-500-S Singlemode Cable Analyzer $9896.6 as Bandwidth Increases Beyond 10 Gb/s to 40 And 100 Gb/s, The Use of Fiber Optics in Enterprise Networks Continues to Grow- And so do The Requirements For Testing And Certification. To Ensure The Performance of Mission-critical Fiber Infrastructure, Network Owners Need a Better Picture of Their Fiber Plant. And no Fiber Test Tool Provides a More Complete Picture Than Optifiber. optifiber Integrates Power/loss, Fiber Length Measurement, Otdr Analysis And Fiber Connector End-face Imaging. The Result is a Higher Tier of Fiber Certification And Diagnostics. The Companion Linkware Software Manages All Test Data And Produces Professional-quality Reports. [BC2114] UPC: 754082069041 UNSPC: 41113711 21L x 16W x 8H 10 LB 1 Cubes |
|
|
Cables To Go 33437 3m LCSC SIMPLEX 9125 SINGLEMODE FIBER PATCH CABLE RED $28.2 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: LC to SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles |
|
|
TRIPP LITE DUPLEX SINGLEMODE 8.3/125 FIBER OPTIC N35603M $44.92 Tripp Lite s 3meter singlemode duplex fiber optic SC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on each end a PVC jacket and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.nbsp;DUPLEX SINGLEMODE 8.3/125 FIBER OPTIC PATCH CABLE SC/SC 3M |
|
|
4-Flat LED Trailer End Connector $11.99 4-Flat LED Trailer End Connector. Incl. 4 Butt Connectors. 48 in. |
|
|
4-Flat LED Car End Connector $11.99 4-Flat LED Car End Connector. Incl. 4 Butt Connectors. 48 in. |
|
|
4-Flat Connector - Trailer End $13.99 The flat 4 connector is the most common connector used in the towing world. These connectors are available to help you make a reliable connection to your truck. |
|
|
Cables To Go 33377 3m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE RED $53.56 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Custom lengths are available just give us a call at 8005069607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. |
|
|
Cables To Go 33320 1m LCST DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE BLACK $50.31 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Custom lengths are available just give us a call at 8005069607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Black. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. |
|
|
Cables To Go 33373 5m LCLC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE GREEN $55.37 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Custom lengths are available just give us a call at 8005069607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) LC to (2) LC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Green. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. |
|
|
Cables To Go 33315 1m STSC DUPLEX 9125 SINGLEMODE FIBER PATCH CABLE RED $44.63 Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Custom lengths are available just give us a call at 8005069607. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: (2) ST to (2) SC. Buffer material: PVC. Buffer OD: 900 m. Jacket material: PVC (OFNRrated). Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. |
|
|
Cables To Go 37677 3m STSC PLENUM 9125 SIMPLEX SINGLEMODE FIBER PATCH CABLE RED $39.61 Get the performance you demand at a price that makes sense with PlenumRated 9/125 Singlemode Fiber Patch Cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances but are still cost effective. They also provide the fire protection required to run these cables within walls and air plenums without the need for conduit. Perfect for use with todays high speed networks while providing headroom for tomorrows higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are colorcoded for easy identification in a congested patch field. Features: A cost effective solution that provides higher bandwidth and support for longer distances. Perfect for use in Gigabit Ethernet applications. Headroom for tomorrows higher bandwidth needs. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Colorcoded connector keys available in red blue green and black. Lifetime warranty against defects of materials and workmanship. Connectors: ST to SC. Buffer OD: 900 m. Jacket OD: 3.0 mm. Jacket color: Red. Attenuation 1310 nm: 1.0 dB/km. Attenuation 1550 nm: 0.75 dB/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles. Custom lengths are available. |