Cisco Aironet Power
 |
US $99.00
Wireless Network Site Survey Overview
Overview
The site survey is an assessment of signal coverage per each access point within a specific building. It confirms with the client 100% coverage at a specified signal guaranteeing employees will have no issues with sending wireless packets across the network. Each building structure will have a design that determines signal characteristics. The most often issues that cause problems with decreasing wireless signals include water, metal, building contours and devices that emit electro-magnetic interference. Some access points can send a pattern of coverage extending 100 - 170 feet while some will emit a signal 50 feet with same characteristics.
The building structural design has a lot to do with that.
The following is an overview of the site survey process:
1) Discuss Signal / Noise and Data Rate with Client
2) Obtain Floor Plans
3) Survey Buildings Noting Signal and Coverage
4) Document Access Point Placement
What then is an acceptable signal? Signal to noise separation of around 20 - 25 dBm at 54 Mbps is a minimum with most designs. The site survey software measuring a continuous 75 dBm signal and 95 dBm noise (75/95) would be enough to have employees connected and sending packets with same service level as wired clients. As signal weakens it becomes more difficult to distinguish between a signal of 80 dBm and noise of 95 dBm (80/95). There is less separation between signal and noise making the signal difficult to detect. It is counter intuitive that a larger number is a weaker signal however the key with signal and noise measurements is the signal is a negative number and hence a lower value is a bigger number. Discuss with the client what specific client adapter, 802.11a/b/g wireless standard and data rate they'll implement and survey with that. Deploying the 802.11a standard doesn't require a separate survey if you implement dual band and surveyed with 802.11g. Some companies with higher bandwidth demands will improve cell coverage with a separate 802.11a survey. It isn't as cost effective with additional access points deployed per cell coverage. Configure the access point with the selected 802.11a/b/g protocol, transmit power and data rate. Set the data rate and transmit power of the client adapter to maximum during the survey.
The site survey of a building involves walking around with a laptop on a powered cart configured with a Cisco wireless client adapter and the Cisco Aironet Desktop Utility (ADU). The software is a utility available with Cisco client adapters. The Cisco access point is placed at a specific spot on the ceiling or above the ceiling tile, wall, desktop or cubicle and measurements of signal coverage is noted. The access point is moved until optimal coverage occurs for that cell. Select ADU active mode to examine data rate, link status and errors while surveying. The cell coverage can be transferred to a Visio drawing floor plan with specific access placement and signal boundaries. The access point is moved around until the entire building is mapped. The minimum signal strength should be recorded per coverage cell. Be as specific as possible as you describe where access points should be implemented. Some clients will have floor plans which makes the site survey much easier to document coverage. Scan each floor plan as a Visio drawing noting specific placement of access points and assignment of channels.
Your map will have some overlapping of coverage which isn't a concern. You should assign a channel that doesn't overlap with neighbor cells and employees won't have any problem with channel interference. As mentioned the 802.11b and 802.11g wireless standards use the 2.4 GHz frequency band which can cause interference however there are 3 non-overlapping channels (1, 6 and 11) that can be assigned. As an example should your building have a main floor with 17 rooms and each access point cover 3 rooms use the following channel assignments:
AP1 Channel 1 Rooms 1-3
AP2 Channel 6 Rooms 4-6
AP3 Channel 11 Rooms 7-9
AP4 Channel 1 Rooms 10-12
AP5 Channel 6 Rooms 13-15
AP6 Channel 11 Rooms 16-17
In some instances you could have signal overrun between AP2 and AP5 with specific building design shapes. Decrease the transmit power from 100 mW to 20 mW on either or both access points and confirm signal strength is still acceptable at those rooms. Should the decreased transmit power setting not allow for same coverage, change position of the access point, implement an additional access point at decreased wattage or an external antenna. Site surveys take some trial and error knowing where possible signal coverage will occur. You will know after doing some preliminary testing at a specific building what coverage to expect. Walk around with the laptop when starting and get some understanding of signal patterns. Signal overrun can often occur outside the building posing a security risk with hackers on the street. The site survey should confirm no signal overrun with minimized access point transmit power.
Multi-floor buildings will have some access points that will send signals across several floors. You can of course use fewer access points should access points cover those floors or decrease transmit power and assign non-overlapping channels as discussed. The issue with signal overrun is a concern where an access point covers some of a floor and not all of a room on another floor. You want access points spaced with proper signal coverage and minimal overlapping. Again the building could allow for an access point to cover a single floor or 2 floors with a signal strength as needed everywhere. Should a third floor exist you can deploy it on that floor. The first and second floor would have an access point on the first floor. Deploying on the second floor would cause signal overlap. That isn't an issue with non-overlapping channels, however clients with fast roaming should associate with the nearest access point. Having access points on second and third floors could cause some clients on the third floor to select a second floor access point over utilizing it and decreasing performance.
The client sends out a beacon and selects the nearest access point with the best signal, lower number of clients and matching security settings. A negotiation between access point and client adapter occurs and data is sent at the highest supported rate available. The coverage map with access point placement should be specific as possible during the survey describing access point placement. Deploy all access points and test connectivity. With all access points transmitting the chances for interference occurs and the design can be modified before deployment. Signal overrun outside can be tested confirming the signal stays within wall boundaries and there is no access from the street. Spectrum analyzers can be deployed during the site survey or after to examine frequencies with interference and possible sources. Defining a security test plan is a good idea after deploying access points.
Make survey notes concerning mounting issues, where AC power outlets unavailable, distance between wiring closets and cabling distance between access point and switch. Cisco does have outside wireless bridges available connecting buildings with line of sight. There is a survey involved with deploying those bridges that considers path loss with transmitted signals and how environmental issues such as wind and rain will affect data transmitted.
Cisco Wireless Network Design Guide available at amazon.com and eBookmall.com
Shaun Hummel is an author of various technical books and has a web site focused on information technology job search solutions and certifications.
http://www.networkjobsolutions.com
About the Author
Shaun Hummel, CCNP, is a Senior Network Engineer with 11 years experience in enterprise network planning, design, and implementation. He has worked for various private and public companies in Canada and the United States improving infrastructure, security, and management. He has written Network Planning and Design Guide, Cisco Wireless Network Design Guide and Network Assessment Guide. www.networkjobsolutions.com
|
|
Cisco AiroNet 1500 Power Injector AIR-PWRINJ1500= $106.13 Cisco AiroNet 1500 Power Injector AIR-PWRINJ1500= |
|
|
Cisco Aironet Power Injector $44.99 1 1 x RJ-45 10/100Base-TX 1.36" Height x 2.14" Width x 5.49" Depth 10 to 90% Non-condensing Operating 10/100Base-TX 15 W 32°F (0°C) to 104°F (40°C) Operating 4 oz 48 V DC Interlockable: Yes LEDs: 2 - Power Status Device Connectivity Cisco Aironet Series Access Points: 1100 1200 1220 1230 Cisco Aironet Power Injector provides Ethernet inline powering as an alternative to local power or inline power capable switches, while also providing improved device and cable organization. AIR-PWRINJ3= Aironet Power Injector Cisco Cisco Systems, Inc PoE Injector www.cisco.com |
|
|
Cisco Aironet Aironet Power Injector Media Converter $198.99 1 x MT-RJ 1 x RJ-45 1.24 Mile 1.36" Height x 5.49" Width x 2.14" Depth 100Base-FX 100Base-TX 2 4 oz 90 Day Limited Cisco Aironet 1100 Series Access Points Cisco Aironet 1130AG Series Access Points Cisco Aironet 1200 Series Access Points Cisco Aironet 1230AG Series Access Points Cisco Aironet 1240AG Series Access Points Spare Product Power Injector: Injects Power into two unused pairs in the Category 5 cable: 4 and 5 (negative) and 7 and 8 (positive) The Cisco Aironet Power Injector Media Converter (AIR-PWRINJ-FIB) converts fiber media to Category 5 media and combines the resulting data signal with power for delivery to the access point or bridge. The power injector media converter accepts 48 VDC power from either the barrel connector of the local power supply or an alternative 48 VDC power source. When powered by an alternate 48 VDC power source connected using the provided power supply pigtail, the Power Injector Media Converter is UL2043 certified and suitable for installation in environmental air spaces. The local power supply is provided with the Cisco Aironet 1100, 1130AG, 1200, 1230AG and 1240AG series access points. AIR-PWRINJ-FIB= Aironet Aironet Aironet Power Injector Media Converter Category 5 Cisco Cisco Systems, Inc External Media Converter www.cisco.com |
|
|
Cisco AiroNet Streetlight Power TAP Power Adapter AIRPWRSTLTR3P $173.33 Cisco AiroNet Streetlight Power TAP Power Adapter AIRPWRSTLTR3P |
|
|
Cisco AiroNet 1500 AC Power Cord 15ft. N. America AIRCORD150015NA $112.74 Cisco AiroNet 1500 AC Power Cord 15ft. N. America AIRCORD150015NA |
|
|
Cisco AiroNet 1500 Power Injector AIR-PWRINJ1500= AIR-PWRINJ1500 AIRPWRINJ1500RF AIRPWRINJ1500 $66.27 Cisco AiroNet 1500 Power Injector AIR-PWRINJ1500= AIR-PWRINJ1500 AIRPWRINJ1500RF AIRPWRINJ1500 |
|
|
Cisco AiroNet Power Injector External 15Watt 1-out Airpwrinjfib= $213.56 Cisco AiroNet Power Injector External 15Watt 1-out Airpwrinjfib= |
|
|
Cisco - Air-Pwrinj3= - Cisco Aironet Power Injector $51.63 cisco Aironet Power Injector Provides Ethernet Inline Powering As An Alternative To Local Power Or Inline Power Capable Switches, While Also Providing Improved Device And Cable Organization. [AIRPWRINJ3] UPC: 746320876764 UNSPC: 39121000 7.75L x 10.25W x 2.25H 0.75 LB 0.08 Cubes |
|
|
CISCO AIR-PWRINJ3= Aironet Power Injector $42.99 Type: PoE Injector Specifications: LAN Connection: RJ-45 10/100BASE-TX Device Connection: RJ-45 10/100BASE-TX Max Cat 5 cable length: 100 m from switch to device LEDs: 2 - Power Status Device Connectivity Power: Input voltage (supplied by external power supply) 48VDC +/- 10%, 18 watts Output voltage: 48 VDC Input current: .380A Output current: .320A Features: Cisco Aironet Power Injector for 1100, 1130AG, 1200, 1230AG and 1240AG Series |
|
|
CISCO AIR-PWRINJ4 Power Injector for the Cisco Aironet 1250 Series $92.99 Features: Compatibility: Cisco Aironet 1250 Series Access Points Parts: 5 years limited Labor: 5 years limited |
|
|
Aironet Power Injector LR2 - power injector $185.99 Cisco Aironet Power Injector LR2 - Power injector - 48 V - 2 output connector(s) - for Aironet 1310 Outdoor Access Point/Bridge |
|
|
Cisco Power Injector For Cisco AiroNet 1250 1260 3600 Series AIR-PWRINJ4 AIR-PWRINJ4= $78.17 Cisco Power Injector For Cisco AiroNet 1250 1260 3600 Series AIR-PWRINJ4 AIR-PWRINJ4= |
|
|
Cisco Aironet 1142 Access Point $6227.99 1 1.84" 10 1140 1142 2.30 lb 2.41 GHz 2.46 GHz 3 dBi 300 Mbps 4 dBi 5.18 GHz 5.83 GHz 8.70" IEEE 802.1X IEEE 802.11i WPA WPA2 TKIP EAP-TLS EAP-TTLS EAP-MSCHAPv2 EAP-FAST EAP-SIM EAP-GTC PEAP Wi-Fi Multimedia (WMM) Cisco 1140 Series IOS Wireless LAN LWAPP Recovery (S114RK9W-12418JA) The Cisco Aironet 1142 Access Point is a business-ready, 802.11n access point designed for simple deployment and energy efficiency. The high-performance platform, which offers at least six times the throughput of existing 802.11a/g networks, prepares the business for the next wave of mobile devices and applications. Building on the Cisco Aironet heritage of RF excellence, the 1142 combines the industry's most widely deployed 802.11n technology with a sleek industrial design that blends seamlessly into any enterprise environment. Designed for sustainability, it delivers high performance from standard 802.3af Power over Ethernet while decreasing waste with multiunit eco-packs and Energy Star certified power supplies. AC Adapter AIR-LAP1142-NK9-PR Aironet Aironet 1140 Aironet 1142 Access Point Ceiling-mountable Cisco Cisco Systems, Inc IEEE 802.11n (draft) Wall-mountable Wireless Access Point Yes www.cisco.com |
|
|
Cisco Aironet 1142N Access Point $618.99 1 1.84" 110 V AC 1140 1142N 2.30 lb 2.41 GHz 2.46 GHz 220 V AC 3 dBi 300 Mbps 4 dBi 5.18 GHz 5.83 GHz 8.70" 90 Day Limited WPA WPA2 TKIP EAP-TLS EAP-TTLS EAP-MSCHAPv2 EAP-FAST EAP-SIM EAP-GTC PEAP Cisco 1140 series IOS Wireless LAN (S114W7K9-12421JA) The Cisco Aironet 1142N Access Point is a business-ready, 802.11n access point designed for simple deployment and energy efficiency. The high-performance platform, which offers at least six times the throughput of existing 802.11a/g networks, prepares the business for the next wave of mobile devices and applications. Building on the Cisco Aironet heritage of RF excellence, 1142N combines the industry's most widely deployed 802.11n technology with a sleek industrial design that blends seamlessly into any enterprise environment. AIR-AP1142N-A-K9 Aironet Aironet 1140 Aironet 1142N Access Point Ceiling-mountable Cisco Cisco Systems, Inc Energy Star IEEE 802.11n (draft) Power Supply Wall-mountable Wireless Access Point Yes www.cisco.com |
|
|
Aironet Power Injector - power injector - 15 Watt $37.99 Cisco Aironet Power Injector - Power injector - 48 V - 15 Watt - 1 output connector(s) - for Aironet 1100 1130 1131 1200 1210 1220 1230 1231 1232 1242 1250 1252 12 |
|
|
Cisco Aironet 1242 802.11a/g IOS AP AIRAP1242AGAK9 $809.06 MODEL AIRAP1242AGAK9 VENDOR CISCO FEATURES Cisco Aironet 1240AG Series 802.11A/G Access Point 802.11a/g Nonmodular Cisco IOS access point; RPTNC; FCC configuration. The Cisco Aironet 1240AG Series IEEE 802.11a/b/g Access Point is a fixedconfiguration dualband access point. Built in to the access point are two radios each with dual antenna connectors for diversity. The Cisco Aironet 1240AG supports local power as well as Power over Ethernet (PoE) either by an IEEE 802.3afcompliant Power Sourcing Equipment (PSE) device such as a switch or by a device capable of providing 12.95W to a Powered Device (PD) and compliant with Cisco Inline Power. The Cisco Aironet 1240AG Series includes a console port for management. The Cisco Aironet 1240AG Series ships with the following: Access point Cisco IOS Software or Cisco Lightweight Access Point Protocol Mounting plate security hasp pair of ceiling tile clips hardware accessory package. Documentation Cisco Aironet 1240AG Series IEEE 802.11a/b/g access points deliver the versatility high capacity security and enterpriseclass features demanded by WLAN customers. It is designed specifically for challenging RF environments like factories warehouses and large retail establishments that require the antenna versatility associated with connectorized antennas a rugged metal enclosure and a broad operating temperature range. The Cisco Aironet 1240AG Series provides local as well as inline power including support for IEEE 802.3af Power over Ethernet (PoE). The Cisco Aironet 1240AG Series is a component of the Cisco Unified Wireless Network a comprehensive solution that delivers an integrated endtoend wired and wireless network. Using the radio and network management features of the Cisco Unified Wireless Network for simplified deployment the Cisco Aironet 1240AG Series extends the security scalability reliability ease of deployment and manageability available in wired networks to the wireless LAN. The Cisco Aironet 1240 |
|
|
Cisco AIRAP1131AGAK9 Aironet 1100 802.11abg AP $666.9 Cisco Aironet 1100 Series Access Point 802.11a/b/g Integrated Antennas (2.4GHz 3.0dBi 5GHz 4.5dBi) and Internal Dual Radios (802.11a 802.11b/g) FCC Configuration.MODEL: AIRAP1131AGAK9 VENDOR: CISCO FEATURES: Cisco Aironet 1130AG Series Access Point The Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point is a fixedconfiguration dualband access point. Built in to the access point are two radios each with diversity antennas that provide omnidirectional coverage. The Cisco Aironet 1130AG supports local power as well as Power over Ethernet (PoE) either by an IEEE 802.3afcompliant Power Sourcing Equipment (PSE) device such as a switch or by a device capable of providing 12.95W to a Powered Device (PD) and compliant with Cisco Inline Power. The Cisco Aironet 1130AG Series includes a console port for management. Includes Cisco Aironet 1130AG Access Point; Cisco IOS Software; Mounting plate security hasp pair of ceiling tile clips hardware accessory package; Documentation; Power supply and power cord. Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high capacity highsecurity enterpriseclass features in an unobtrusive officeclass design delivering WLAN access with the lowest total cost of ownership. With highperforming dual IEEE 802.11a and 802.11g radios the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardwareassisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i WiFi Protected Access 2 (WPA2) or WPA security. Supporting Cisco IOS Software the Cisco Aironet 1130AG Series is a component of the Cisco Structured WirelessAware Network (SWAN) framework a comprehensive framework that delivers an integrated endtoend wired and wireless network. Using the radio and network management features of the Cisco SWAN framework for simplified deployment along with builtin omnidirec |
|
|
Cisco AIRAP1131AGAK9 Aironet 1100 802.11a/b/g AP $666.9 Cisco Aironet 1100 Series Access Point 802.11a/b/g Integrated Antennas (2.4GHz 3.0dBi 5GHz 4.5dBi) and Internal Dual Radios (802.11a 802.11b/g) FCC Configuration.MODEL: AIRAP1131AGAK9 VENDOR: CISCO FEATURES: Cisco Aironet 1130AG Series Access Point The Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point is a fixedconfiguration dualband access point. Built in to the access point are two radios each with diversity antennas that provide omnidirectional coverage. The Cisco Aironet 1130AG supports local power as well as Power over Ethernet (PoE) either by an IEEE 802.3afcompliant Power Sourcing Equipment (PSE) device such as a switch or by a device capable of providing 12.95W to a Powered Device (PD) and compliant with Cisco Inline Power. The Cisco Aironet 1130AG Series includes a console port for management. Includes Cisco Aironet 1130AG Access Point; Cisco IOS Software; Mounting plate security hasp pair of ceiling tile clips hardware accessory package; Documentation; Power supply and power cord. Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high capacity highsecurity enterpriseclass features in an unobtrusive officeclass design delivering WLAN access with the lowest total cost of ownership. With highperforming dual IEEE 802.11a and 802.11g radios the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardwareassisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i WiFi Protected Access 2 (WPA2) or WPA security. Supporting Cisco IOS Software the Cisco Aironet 1130AG Series is a component of the Cisco Structured WirelessAware Network (SWAN) framework a comprehensive framework that delivers an integrated endtoend wired and wireless network. Using the radio and network management features of the Cisco SWAN framework for simplified deployment along with builtin omnidirec |
|
|
Cisco Aironet 5508 Wireless Controller $14062.99 1.75" 110 V AC 21.20" 220 V AC 5500 5508 2 x Service Ports 1 x Utility Port Up to 50 Cisco access points WMM/802.11e HTTP/HTTPS SNMP v1/v2c/v3 Syslog Telnet 802.1Q Vtagging QoS The Cisco 5508 Wireless LAN Controller is a highly scalable and flexible platform that enables system wide services for mission-critical wireless in medium to large-sized enterprises and campus environments. Designed for 802.11n performance and maximum scalability, it offers enhanced uptime with the ability to simultaneously manage 50 access points; superior performance for reliable streaming video and toll quality voice; and improved fault recovery for a consistent mobility experience in the most demanding environments. Optimized for next-generation wireless networking, the 5508 offers improved mobility and prepares the business for the next wave of mobile devices and applications. It supports a higher density of clients and delivers more efficient roaming, with at least nine times the throughput of existing 802.11a/g networks. AIR-CT5508-50-K9 Aironet Aironet 5500 Aironet 5508 Wireless Controller Cisco Cisco Systems, Inc Not Applicable Power Supply Wireless LAN Controller Yes www.cisco.com |
|
|
Cisco Aironet Omnidirectional Antenna AIRANT24120 $506.98 Cisco Aironet Omnidirectional Antenna AIRANT24120 |
|
|
Cisco AiroNet Lightning Arrestor AIRACC245LAR $151.46 Cisco AiroNet Lightning Arrestor AIRACC245LAR |
|
|
CISCO AIR-PWRINJ-FIB Aironet Power Injector Media Converter $184.99 Specifications: LAN Connection Max Fiber cable length: 2 km Type: MT-RJ (multimode fiber) Label: 100BASE-FX To Network Speed: 100 Mbps Duplex: Full Device Connection Max Cat 5 cable length: 100 m Type: RJ-45 Label: 100BASE-TX To Device Speed: 100 Mbps Duplex: Full Auto MDI-X Features: Compatibility: Cisco Aironet 1100 Series Access Points Cisco Aironet 1130AG Series Access Points Cisco Aironet 1200 Series Access Points Cisco Aironet 1230AG Series Access Points Cisco Aironet 1240AG Series Access Points Parts: 5 years limited Labor: 5 years limited |
|
|
Cisco Aironet 1041N Wireless Access Point $295.99 1 1.85" 1040 1041N 110 V AC 2.29 lb 2.41 GHz 2.46 GHz 220 V AC 300 Mbps 4 dBi 8.70" WPA WPA 2 AES TKIP TTLS EAP-TLS MSCHAP v2 EAP PEAP EAP-MSCHAP v2 EAP-FAST Designed for sustainability, the Cisco Aironet 1040 Series offers 802.11n performance with standard 802.3af Power over Ethernet (PoE). At only 12.95 watts of power, the 1040 Series combines the power of dual-radio 802.11n with the efficiency of standard PoE. The sleek industrial design of the 1040 Series blends seamlessly into any indoor enterprise environment. AIR-LAP1041N-A-K9 Aironet Aironet 1040 Aironet 1041N Wireless Access Point Cisco Cisco Systems, Inc IEEE 802.11n (draft) Lifetime Limited Power Supply Wireless Access Point Yes www.cisco.com |
|
|
Cisco Aironet 1042 Wireless Access Point $4586.99 1 1.85" 10 1040 1042 110 V AC 2.29 lb 2.41 GHz 2.46 GHz 220 V AC 3 dBi 300 Mbps 4 dBi 5.18 GHz 5.83 GHz 8.70" WPA WPA 2 AES TKIP TTLS EAP-TLS MSCHAP v2 EAP PEAP EAP-MSCHAP v2 EAP-FAST Designed for sustainability, the Cisco Aironet 1040 Series offers 802.11n performance with standard 802.3af Power over Ethernet (PoE). At only 12.95 watts of power, the 1040 Series combines the power of dual-radio 802.11n with the efficiency of standard PoE. The sleek industrial design of the 1040 Series blends seamlessly into any indoor enterprise environment. AIR-LAP1042-AK9-10 Aironet Aironet 1040 Aironet 1042 Wireless Access Point Cisco Cisco Systems, Inc IEEE 802.11n (draft) Lifetime Limited Power Supply Wireless Access Point Yes www.cisco.com |
|
|
Cisco Aironet 1042N Wireless Access Point $473.99 1 1.85" 1040 1042N 110 V AC 2.29 lb 2.41 GHz 2.46 GHz 220 V AC 3 dBi 300 Mbps 4 dBi 5.18 GHz 5.83 GHz 8.70" WPA WPA 2 AES TKIP TTLS EAP-TLS MSCHAP v2 EAP PEAP EAP-MSCHAP v2 EAP-FAST Designed for sustainability, the Cisco Aironet 1040 Series offers 802.11n performance with standard 802.3af Power over Ethernet (PoE). At only 12.95 watts of power, the 1040 Series combines the power of dual-radio 802.11n with the efficiency of standard PoE. The sleek industrial design of the 1040 Series blends seamlessly into any indoor enterprise environment. AIR-LAP1042N-A-K9 Aironet Aironet 1040 Aironet 1042N Wireless Access Point Cisco Cisco Systems, Inc IEEE 802.11n (draft) Lifetime Limited Power Supply Wireless Access Point Yes www.cisco.com |
|
|
Cisco Aironet 3602I IEEE 802.11n (draft) 450 Mbps Wireless Access Point - Power Over Ethernet AIRCAP3602IAK9 $907.35 Cisco Aironet 3602I IEEE 802.11n (draft) 450 Mbps Wireless Access Point - Power Over Ethernet AIRCAP3602IAK9 |
|
|
Cisco Aironet 3602E IEEE 802.11n (draft) 450 Mbps Wireless Access Point - Power Over Ethernet AIRCAP3602EAK9 $1122.18 Cisco Aironet 3602E IEEE 802.11n (draft) 450 Mbps Wireless Access Point - Power Over Ethernet AIRCAP3602EAK9 |
|
|
Cisco Aironet 1142N IEEE 802.11n (draft) 300 Mbps Wireless Access Point - Power Over Ethernet AIRLAP1142NAK9RF $429.83 Cisco Aironet 1142N IEEE 802.11n (draft) 300 Mbps Wireless Access Point - Power Over Ethernet AIRLAP1142NAK9RF |
|
|
Cisco Aironet 3502E IEEE 802.11n 300 Mbps Wireless Access Point - Power Over Ethernet AIRCAP3502EAK9RF $642.67 Cisco Aironet 3502E IEEE 802.11n 300 Mbps Wireless Access Point - Power Over Ethernet AIRCAP3502EAK9RF |
|
|
Cisco AiroNet 1042N Wireless Access Point IEEE 802.11n Draft 300Mbps Power Over Ethernet Wall-mountable AIRAP1042NAK9 $451.5 Cisco AiroNet 1042N Wireless Access Point IEEE 802.11n Draft 300Mbps Power Over Ethernet Wall-mountable AIRAP1042NAK9 |
|
|
Cisco AiroNet 1300 Power Injector LR2 External 48V 2-out AIRPWRINJBLR2= AIR-PWRINJ-BLR2= $206.17 Cisco AiroNet 1300 Power Injector LR2 External 48V 2-out AIRPWRINJBLR2= AIR-PWRINJ-BLR2= |
|
|
Cisco Aironet 1141N Wireless Lightweight Access Point $500.99 1 1.84" 1140 1141N 2.30 lb 2.41 GHz 2.46 GHz 300 Mbps 4 dBi 8.70" 90 Day WPA WPA2 EAP-TLS EAP-TTLS EAP-MSCHAPv2 EAP-FAST EAP-SIM EAP-GTC PEAP TKIP Wi-Fi Multimedia (WMM) Cisco Unified Wireless Network Software Release 5.2 or later The Cisco Aironet 1141N Access Point is a business-ready, indoor access point designed for simple deployment and energy efficiency. This is a dual-band, 802.11n access point with integrated antennas. AIR-LAP1141N-A-K9 Aironet Aironet 1140 Aironet 1141N Wireless Lightweight Access Point Ceiling-mountable Cisco Cisco Systems, Inc IEEE 802.11b/g IEEE 802.11n (draft) Power Supply Wall-mountable Wireless Access Point Yes www.cisco.com |
|
|
Cisco Aironet Power Injector 48 VDC $177.99 -22°F (-30°C) to 131°F (55°C) Operating -40°F (-40°C) to 185°F (85°C) Storage 0 to 90% Non-condensing 10000 ft Operating 1300 16000 ft Storage 2 2 lb 2 x RJ-45 10/100Base-TX 2 x Type F Connector Ethernet 4.62" x 4.76" x 1.07" LEDs: 1 - Power Status Power Description: Input Voltage: 100 to 240 VAC Output Voltage: 48 VDC Output Power: 2W Interfaces/Ports: Input Ports: 1 x F-Type 10/100Base-T Output Ports: 1 x F-Type 10/100Base-T Environmental Conditions: Operating Temperature: -30°C (-22°F) to 55°C (131°F) Storage Temperature: -40°C (-40°F) to 85°C (185°F) Operating Altitude: 3047 m (10,000 ft.) Storage Altitude: 4877 m (16,000 ft.) Humidity: 0 to 90% Non-condensing The Cisco Aironet Power Injector, converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. AIR-PWRINJ-BLR2= Aironet Aironet Power Injector 48 VDC Cisco Cisco Systems, Inc Ethernet PoE Injector www.cisco.com |
|
|
Cisco Aironet 1242AG Access Point $535.99 1 Year 1.10" 110 V AC 1240AG 2 2 lb 2.2 dBi 2.40 GHz 2.41 GHz 220 V AC 3.5 dBi 460 ft 48 V DC 5 GHz 5.15 GHz 54 Mbps 8.50" 950 ft Aironet 1242AG 802.11a/b/g Wireless Access Point Cisco Aironet 1240AG Series Power Module (universal power module)-optional Quick Start Guide: Cisco Aironet 1240AG Series Access Point Safety Warnings for Cisco Aironet 1240AG Series Access Points Cisco product registration and Cisco documentation feedback cards Mounting hardware kit: One mounting plate with cable security bracket Two suspended ceiling T-rail clips, spacers (accommodates standard and recessed T-rails), and nuts One security hasp Two 6 x 32 x 1/2 in. pan head Phillips machine screws Four 8 x 18 x 3/4 in. pan head Phillips sheet metal screws Four #8 plastic wall anchors One 10 x 24 nut (for ground stud on mounting bracket) Four rubber foot pads Two cable tie wraps Software: Cisco IOS Software Release 12.3(7)JA or later Memory: 32 MB RAM, 16 MB flash Processor: IBM PowerPC405 (200 MHz) Two RP-TNC connectors 802.11g or 802.11a approved Provides Link Role Flexibility when running Cisco IOS Software Can be powered by 802.3af PoE, Cisco inline power switches, single port power injectors, or local power Telnet Console port management Trivial File Transfer Protocol (TFTP) CiscoWorks Campus Manager CiscoWorks CiscoView CiscoWorks WLSE CiscoWorks Wireless LAN Solution Engine (WLSE) Simple Network Management Protocol (MIB I and MIB II) CiscoWorks Resource Manager Essentials (RME) CiscoWorks Software Image Manager (SWIM) UL 60950UL 2043CSAWPAWPA2802.11i802.1xTKIPAES Wi-FiUL 60950UL 2043IEEE 802.11aIEEE 802.11bIEEE 802.11gIEEE 802.3IEEE 802.3afIEEE 802.11iIEEE 802.1x Cisco Aironet 1232AG 802.11a/b/g Wireless Access Point delivers the versatility, high capacity, security, and enterprise-class features demanded by WLAN customers. It is designed specifically for challenging RF environments like factories, warehouses, and large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, and a broad operating temperature range. It extends the security, scalability, reliability, ease of deployment, and manageability available in wired networks to the wireless infrastructure. Running Cisco IOS Software, makes the Access Point supports link role flexibility which provides both access point and bridge functionality through configuration of each radio as an access point, repeater, root bridge, non-root bridge, or workgroup bridge. This configuratio |
|
|
Cisco / Cisco Aironet Diversity Omnidirectional Antenna / AIR-ANT2452V-R= $166.42 Cisco - Cisco Aironet Diversity Omnidirectional Antenna - AIR-ANT2452V-R= |
|
|
Cisco / Cisco Aironet Dipole Antenna / AIR-ANT5135DG-R= $32.71 Cisco - Cisco Aironet Dipole Antenna - AIR-ANT5135DG-R= |
|
|
Cisco / Cisco Aironet Omnidirectional Antenna / AIR-ANT5135D-R $32.71 Cisco - Cisco Aironet Omnidirectional Antenna - AIR-ANT5135D-R |
|
|
Cisco / Cisco Aironet 1141N Access Point / AIR-AP1141N-A-K9 $514.08 Cisco - Cisco Aironet 1141N Access Point - AIR-AP1141N-A-K9 |
|
|
Cisco - Air-Pwrinj-Blr2T= - Cisco Aironet Power Injector 12 To 40 Vdc $194.3 the Cisco Aironet Power Injector, Converts The Standard 10/100 Baset Ethernet Interface That is Suitable For Weather Protected Areas to a Dual F-type Connector Interface For Coax Cables That Are More Suitable For Harsh Outdoor Environments. The Power Injector Also Provides Power to The Outdoor Unit Over The Same Cables With a Power Discover Feature And Surge Protection. [D84862] UPC: 746320949970 UNSPC: 39121000 1 LB 1 Cubes |