Ata Serial Ide
 |
US $.89
Understanding & Buying SATA Cables
What are Sata Cables?
Serial ATA, conceptually known as SATA or S-ATA, (Serial Advanced Technology Attachment) is a long, thin, 7-pin cable. It is a 'wire replacement' for the older AT Attachment standard (ATA). SATA supports almost all ATA and ATAPI devices. These cables are generally incorporated into Laptop Computers, HD DVD, Blu-ray, DVD or CD drive, desktop motherboards including hard disk and other optical drives. These cables are usually 3 feet (1 meter) in length, and are effortlessly routed to stay out of the way allocating maximum airflow inside the case. The cable ensures faster and more competent data transfer and has the capability to eliminate or are add devices whilst operating (hot swap).
Typically, the Serial ATA is based on serial communication. Data is transmitted through a data path while a new path is used to convey acknowledgements of receipt. On each of its data paths, data is communicated through the LVDS (Low Voltage Differential Signalling), transmission means which necessitate transmitting a signal to a wire and it is contradictory to a second wire to permit the receiver to re-establish the signal by difference. The control data are, however, transmitted on the identical path as the data via a specific series of bits to differentiate them.
History and development of SATA devices
Personal computer market associated with hard drive and optical storage devices are using the deviation of the IDE and ATA for the last 10 years. With the passage of time these devices have undergone a sea change in their capabilities. However, it is from the beginning of the year 2009 year, SATA has replaced the legacy ATA and is renamed as Parallel ATA or PATA in each and every shipping consumer PCs. As of now PATA remains prominent in industrial and fixed applications and is reliant on CompactFlash storage; however the new CFast storage standard will be based on SATA.
How the product is superior and what are its expectations from its future products?
A single cable of Serial SATA has a minimum of four wires which creates a point-to-point connection amidst different devices. Its transfer rate begins at 150MBPs or 300 MB/s as against of a 133 MB/s maximum using the preceding technology. However, a third generation SATA i.e. "SATA 6Gb/s" to be introduced this year is expected to deliver around twice the speed of the preceding SATA iteration.
The conventional IDE port i.e. ATA or basically PATA, transmit data in parallel. The sole advantage of parallel transmission over serial transmission is the enhanced speed of the earlier mode, considering that numerous bits are sent at the same time. However, the main disadvantage of it relates to the noise, because a lot of wires have to be used, mainly one for each bit to be sent per turn, one wire produce intrusion in another. That is the reason why ATA-66 and advanced hard disks necessitate a particular, 80-wire cable. The disparity among this 80-wire cable and the standard 40-wire IDE cable is that it comprises a ground wire between each original wire, providing anti-interference shielding.
How to choose good quality Sata Cables?
• Look for a reputed brand while buying SATA cables and ensure they come with a guarantee.
• Verify whether it has the same straight connectors at both ends.
• Whether these cables have a latching system.
• Ensure they prop up high-speed data transfer rates of up to 1.5Gbps over distances up to 3 feet.
• Validate whether they contain metal tab locks, because a number of SATA ports are very wide.
• Look out whether they are compatible with the traditional 4-pin molex connectors as well.
• Ensure whether it is a SATA II cable which has a speed or data transfer rate of 3Gb/s
• Whether the cable has a 270° Drive Connector SATA cable.
About the Author
Sophie Milch currently manages purchasing and inventory control for Comnauts.com
Comnauts.com is one of the internet's fastest growing retailers specializing in computer hardware, software, electronics, ipod and video game accessories.
Sophie keeps herself busy by making sure our inventory is filled with quality products, the latest and the greatest. Sophie holds a B.Sc. in Mathematics from the University of Waterloo and is frequent contributor to several technology blogs and magazines. When she’s not working; in typical nerd fashion you can catch Sophie twittering friends, beating down Murlocs in World of Warcraft and watching re-runs of the X-files.
|
|
Serial ATA to IDE Converter (Serial ATA Port to IDE Device) $9.99 Serial ATA to IDE Converter (Serial ATA Port to IDE Device) |
|
|
Addonics IDE-Serial ATA converter $23.99 1 Year 1 x 40-pin IDC 1 x 7-pin Serial ATA 2 Addonics Combo Hard Drive Addonics Pocket ExDrive Hard drive, CD drive, DVD drive Microsoft DOS Microsoft Windows 95, NT, 98 Second Edition, ME, 2000, XP ADIDESA Addonics Addonics Technologies Data Transfer Adapter IDC IDE-Serial ATA converter PC Serial ATA www.addonics.com |
|
|
Addonics IDE-Serial ATA Converter Storage Controller Adidesa $29.98 Addonics IDE-Serial ATA Converter Storage Controller Adidesa |
|
|
Cables To Go USB 2.0 to IDE/Serial ATA Drive Adapter 30504 $28.75 Cables To Go USB 2.0 to IDE/Serial ATA Drive Adapter 30504 |
|
|
Cables To Go Serial ATA to IDE Converter $32.99 0.50" Height x 2.50" Width x 1.50" Depth 1 x 40-pin IDC Female IDE 1 x 7-pin SATA 10153 2 4.80 oz Compliant with Serial ATA specifications, revision 1.0 Allows you to connect existing IDE drives to your Serial ATA host adapter Plugs directly into the 40-pin IDE connector, no PCI-slot is required Black Cables To Go Data Transfer Adapter IDC RoHS Serial ATA to IDE Converter Yes www.cablestogo.com |
|
|
Tripplite P936000 Ide To Serial Ata (Sata) Conve $30.49 Tripp Lites P936000 Serial ATA (SATA) to IDE converter allows a standard parallel ATA hard disk drive CDROM CDRW DVD ROM DVD + RW etc to be used with Serial ATA Controller cards or motherboards with Serial ATA ports and meets the specification of Serial ATA 1.0 interface. Easily connect IDE/ATA Drives to a SATA Controller Compliance with Serial ATA Gen 1.0. Master/slave device emulation support. Supports PIO mode 0 4. Supports Ultra DMA mode 0 7. Supports UDMA data transfer rates of up to 150MBps Supports ATAPI Packet command set. Supports 48bit LBA addressing. Supports additional ATA command for serial ATA SCR access. Serial ATA power save mode supported Serial ATA BIST operation. Supports hotplugging System Requirements Supports any operating system when a PC with available IDE hard disk and SATA controller are used Package Includes Serial ATA to IDE Converter x 1 Serial ATA Cable x 1 Power supply cable x 1 User s Manual x 1 |
|
|
TRENDnet IDE Device to Serial ATA Converter $18.99 0.53 oz 1 x 40-pin Female IDE 1 x 7-pin Female SATA 2 2.24" x 1.38" x 0.47" Connect any IDE CD, DVD or hard drive device to an available Serial ATA port Use your current IDE device on new SATA motherboards Utilizes Serial ATA 1.0 and hot-pluggable technology Master/slave hard drive emulation supported Supports PIO mode 0~4 and Ultra DMA mode 0~7 Supports ATAPI Packet command set and 48-bit LBA addressing Supports additional ATA commands for serial ATA SCR access Power save mode built-in Serial ATA Built In Self Test (BIST) ready Standard: ATA 33/66/100/133, SATA 1.0 Supported OS: Any OS that supports ATA and SATA Data Transfer Adapter IDE Device to Serial ATA Converter RoHS TRENDnet TU-IDES The IDE to SATA Converter (TU-IDES) allows you to connect IDE devices such as CD, DVD and hard disk drives to a Serial ATA port on your computer's motherboard. Without software installation required, simply connect power and data cables to IDE devices to SATA connector on your computer. Yes www.trendnet.com |
|
|
IDE to SATA Serial ATA HD Power Cable connector $30.32 IDE to SATA Serial ATA HD Power Cable connector Sata power cable sata 15p power cable ide to sata cable |
|
|
SIIG Hi-Speed USB 2.0 to Serial ATA or IDE/Ultra ATA drive adapter JUSA0012S1 $32.18 SIIG Hi-Speed USB 2.0 to Serial ATA or IDE/Ultra ATA drive adapter JUSA0012S1 |
|
|
SATA Serial ATA + USB + IDE PCI COMBO CARD Adapter $15.67 SATA Serial ATA + USB + IDE 7 Ports PCI PC Card Adapter |
|
|
IDE-Serial ATA converter - Storage controller - ATA-133 - SATA $21.99 Addonics IDE-Serial ATA converter - Storage controller - ATA-133 - SATA - for Combo Hard Drive Pocket ExDrive |
|
|
SERIAL ATA CONVERTER BOARD - storage controller - IDE - SATA $32.99 C2G SERIAL ATA CONVERTER BOARD - Storage controller - 1 Channel - IDE - SATA - blue translucent |
|
|
free shipping IDE PCI SATA Serial ATA Card PC VIA VT6421A 6421 #9592 $15.62 IDE PCI SATA Serial ATA Card PC VIA VT6421A 6421 |
|
|
4Pin IDE to 15Pin Serial ATA SATA Power Adapter Cable $6.49 Description:New generic 4Pin IDE to 15Pin Serial ATA SATA Power Adapter CableGood quality, fast transfer speed and work steadily of this 4Pin IDE to 15Pin CableConvert your IDE Hard drive to SATA Hard driveThis is a reliable and durable IDE to SATA Power CableConnectors: 4Pin IDE to 15Pin SATALength: 20cmWeight: 13gPackage included:1 x 4Pin IDE to Serial ATA Cable |
|
|
USB 2.0 to IDE or Serial ATA Drive Adapter - storage controller - IDE / eSATA - USB 2.0 $24.99 C2G USB 2.0 to IDE or Serial ATA Drive Adapter - Storage controller - IDE / eSATA - 480 MBps - USB 2.0 - black |
|
|
Addonics IDE-Serial ATA Converter - Storage Controller - ATA-133 - SATA. Each $24.94 Manufacturer: Addonics. Each. Looking to get more speed out of your hard drive, hot swap capability and better air flow in the over crowded interior of your desktop computer? Addonics Serial ATA line of product is your answer.The Addonics IDE-Serial ATA c |
|
|
IDE ATA 100/133 DVD HDD CD to Serial SATA Adapter Converter $10.49 Description:IDE 100/133 HDD/DVD/CD (Motherboard) TO SERIAL SATA (HDD or DVD/CD-ROM) CONVERTER ADAPTER.Ideal tool for data backups, recovery and transferringUsing this IDE to SATA Adapter, you can convert all SATA type devices CD-ROM/CD-RW/DVD/DVD-RAM/HDD into IDE deviceHDD to SATA Adapter accept SATA commands through the Serial ATA interface from the host, decode the commands and convert them to parallel ATA commands to the deviceSupport the Serial ATA transfer rate of 1.5 Gb/s (150 MB/s) on the serial side and is compatible with ultra ATA-133 on the parallel ATA sideMini board size, no space wasted.Specification:Serial SATA Adapter supports ATA 100/133Compliant with Serial ATA specificationData transfer rate up to 150 MbpsConnectors: One 40 pin IDE port, One Serial ATA port, One 4pin power connectorPlug and playSupport Windows 98/SE/ME/2000/XPSize: L5.4 x W4.7 x H0.6cmWeight: 57gPackage included:1 x IDE to SATA Converter1 x Power cable1 x SATA cable |
|
|
StarTech.com IDE/SATA to eSATA/USB Hard Drive Enclosure - Storage Enclosure - 1 x 3.5" - 1/3H Internal - IDE, Serial ATA, U... $44.36 StarTech.com IDE/SATA to eSATA/USB Hard Drive Enclosure - Storage Enclosure - 1 x 3.5" - 1/3H Internal - IDE, Serial ATA, U... |
|
|
Tripp Lite P936-000 IDE to Serial ATA ( SATA ) Converter $18.99 Type: IDE to SATA Specifications: Connector A: 40 POS. Socket (Female) Connector B: 4 Pin (Female) Connector C: 7 Pin SATA Straight (Male) Connector D: 4 Pin (Male) System Requirements: Supports any operating system when a PC with available IDE hard disk and SATA controller are used Features: Easily connect IDE/ATA Drives to a SATA Controller Compliance with Serial ATA Gen 1.0 Master/slave device emulation support Supports PIO mode 0 - 4 Supports Ultra DMA mode 0 - 7 Supports UDMA data transfer rates of up to 150MBps Supports ATAPI Packet command set Supports 48-bit LBA addressing Supports additional ATA command for serial ATA SCR access Serial ATA power save mode supported Serial ATA BIST operation Supports hot-plugging Package Contents: Serial ATA to IDE Converter x 1 Serial ATA Cable x 1 Pow... |
|
|
TRENDnet TU-IDES IDE Device to Serial ATA Converter $21.99 Type: IDE to SATA Specifications: Standard ATA 33/66/100/133, SATA 1.0 Supported OS Any OS that supports ATA and SATA Input 7-pin female SATA data connector 4-pin power connector Output 40-pin IDE female connector to IDE device Power Consumption 78 mA Temperature -20ºC to 60ºC (-4ºF to 140ºF) Humidity 0~90%, Non-Condensing Certification FCC, CE Features: Connect any IDE CD, DVD or hard drive device to an available Serial ATA port Use your current IDE device on new SATA motherboards Utilizes Serial ATA 1.0 and hot-pluggable technology Master/slave hard drive emulation supported Supports PIO mode 0~4 and Ultra DMA mode 0~7 Supports ATAPI Packet command set, and 48-bit LBA addressing Supports additional ATA commands for serial ATA SCR access Power save mode built-in Serial ATA Built In Self Test (BI... |
|
|
IDE ULTRA ATA 100/133 to SATA Converter Adapter $11.99 Features: This Converter works to converts parallel ATA to SATAIt features One 40 pin IDE port, One Serial ATA port, One 4pin power connectorThe IDE to SATA Converter is designed to connect this converter to your motherboard IDE portSATA Converter spports ATA 100/133HD Driver Converter is compliant with Serial ATA specificationIncluded power cable and SATA connective cable.Size: 55 *50* 5mmWeight: 63g |
|
|
Promise PDC20375 3 SATA IDE Serial ATA RAID PCI Card For HDD #8073 $4.69 Promise PDC20375 3 SATA IDE Serial ATA RAID PCI Card For HDD |
|
|
Promise PDC20375 3 SATA IDE Serial ATA RAID PCI Card For HDD #8073 free shipping $7.93 Promise PDC20375 3 SATA IDE Serial ATA RAID PCI Card For HDD |
|
|
TrendNet / TRENDnet Converter TU-IDES IDE Device to Serial ATA Converter / TU-IDES $25.56 TrendNet - TRENDnet Converter TU-IDES IDE Device to Serial ATA Converter - TU-IDES |
|
|
Cru INC Dataport 25 Receiving Frame IDE/SERIAL ATA Rohs 851150099500 $50.53 Cru INC Dataport 25 Receiving Frame IDE/SERIAL ATA Rohs 851150099500 |
|
|
Cables To Go USB 2.0 to IDE/Serial ATA Drive Adapter $28.99 1 1 Year 1 x 40-pin IDC Female Ultra ATA 1 x 44-pin IDC Female Ultra ATA 1 x 7-pin Female Serial ATA 15.20 oz 30504 USB 2.0 to IDE/Serial ATA Drive Adapter 5" 7-Pin M/M Serial ATA Cable 5V 1A/12V 1A Power Supply (supports both SATA Power and 4-Pin Molex Power) Power Cable (for power supply) User Manual The USB 2.0 to IDE or Serial ATA Controller from Cables To Go turns any IDE or SATA drive into a convenient external drive. Simply connect one IDE/ATAPI or SATA-based mass storage device through a USB port to easily transfer files from a computer or notebook, back up files or store large file archives on an external hard drive. The hi-speed USB interface enables easy installation with its plug-and-play design. The adapter supports all existing IDE/ATAPI devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives, and works with any SATA hard drive from 80GB to 500GB. Cables To Go External Mac PC RoHS Serial ATA Serial/Ultra ATA Controller USB USB 2.0 to IDE/Serial ATA Drive Adapter Ultra ATA Up to 480 Mbps Yes www.cablestogo.com |
|
|
Cables To Go 10153 SERIAL ATA CONVERTER BOARD $44.08 Leverage your investment in existing IDE drives with this hasslefree IDE to Serial ATA adapter. The adapter simply plugs into your IDE device then connects to your Serial ATA controller via a Serial ATA power cable (included). Connecting IDE devices to Serial ATA controllers ensure you get maximum performance while making the most of your hardware investments. Features: Compliant with Serial ATA specifications revision 1.0. Allows you to connect existing IDE drives to your Serial ATA host adapter. Plugs directly into the 40pin IDE connector; no PCIslot is required. |
|
|
SATA-IDE Bilateral Converter Board $6.59 - IDE To SATA & SATA To IDE Adapter Bilateral - Supports ATA 100/133- Compatible with Serial ATA specification |
|
|
7 + 6 Pin to Serial ATA SATA Data IDE Power Cable $6.49 Description:This is a SATA 7 + 6 Pin Hard Disk Cable/2 Pin Power Cable/SATA Data CableOne 7 pin + 6 pin SATA connector splits into a 2 pin IDE power connector and a 7 pin SATA data connector.Superior quality and safetyThe sata cable is male.7 + 6 Pin Serial ATA Cable can connect with hard diskSATA to SATA Cable length: 52cm approx.Weight: 23.6gPackage content:1 x SATA to IDE Power Cable |
|
|
Cables To Go USB 2.0 To IDE Or Serial ATA Drive Adapter - Storage Controller - IDE / SATA-150 - 480 MBps - Hi-Speed USB - Black. Each $26.44 Manufacturer: Cables To Go. Each. The USB 2.0 to IDE or Serial ATA Drive Adapter from Cables To Go turns any IDE or SATA drive into a convenient external drive. Simply connect one IDE/ATAPI or SATA-based mass storage device through a USB port to easily tr |
|
|
7+15 Pin to 4 Pin IDE Power Serial ATA SATA Data Cable (30CM) $3.31 - Connect your high-speed Serial ATA device to a Serial ATA Controller - Support high speed data transfer rates |
|
|
Cables Unlimited Parallel ATA to Serial ATA Drive Converter $12.99 1 Year 1 x IDE/ATA Female 1 x Serial ATA 2 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB Supports any type of SATA Device Ultra ATA 133 / 100 / 66 / 33 Serial ATA 1.0a This SATA adapter provides a single chip solution for bridging between ATA controllers and SATA device. With the capability to translate SATA mass storage commands to ATA/ATAPI communication protocol you can easily use all types of Serial ATA Devices such as HDD, DVD-RW, CD-ROM, CD-RW with your existing ATA controller without the added expense of purchasing a SATA host controller. Cables Unlimited Data Transfer Adapter FLT-7100 IDE/ATA Parallel ATA to Serial ATA Drive Converter Serial ATA www.cablesunlimited.com |
|
|
Siig 3-port PCI Express Serial ATA/PATA Controller $53.99 1 1 x IDC IDE/EIDE Internal 1 x IDE/ATA 150 Mbps - PATA 2 2 x Serial ATA/600 2 x Serial ATA/600 Serial ATA Internal 3-port PCI Express Serial ATA/PATA Controller 6 Gbps - Serial ATA 3-port PCI Express Serial ATA/PATA Controller Spare Low Profile Bracket Serial ATA Cable Dual-connector Serial ATA Power Cable Ultra ATA cable Driver CD & User's Manual EIDE Lifetime PC PCI Express Plug-in Card SC-SA0E12-S1 SIIG SIIG, Inc Serial ATA/600 Serial/Ultra ATA Controller www.siig.com |
|
|
StarTech.com USB SATA IDE HDD Docking Station for 2.5/3.5in - Drive Dock - 2.5" - Dock , 3.5" - 1/3H Dock - Serial ATA, EID... $57.73 StarTech.com USB SATA IDE HDD Docking Station for 2.5/3.5in - Drive Dock - 2.5" - Dock , 3.5" - 1/3H Dock - Serial ATA, EID... |
|
|
StarTech.com 2.5 Tool-less USB to IDE SATA Hard Drive Enclosure - Storage Enclosure - 1 x 2.5" - Internal - Serial ATA, EID... $28.45 StarTech.com 2.5 Tool-less USB to IDE SATA Hard Drive Enclosure - Storage Enclosure - 1 x 2.5" - Internal - Serial ATA, EID... |
|
|
Cables To Go 30504 USB 2.0 to IDE or SERIAL ATA DRIVE ADAPTER $38.03 The USB 2.0 to IDE or Serial ATA Drive Adapter from Cables To Go turns any IDE or SATA drive into a convenient external drive. Simply connect one IDE/ATAPI or SATAbased mass storage device through a USB port to easily transfer files from a computer or notebook back up files or store large file archives on an external hard drive. The hispeed USB interface enables easy installation with its plugandplay design. The adapter supports all existing IDE/ATAPI devices such as Iomega Zip CDROM CDRW DVDROM and IDE hard drives and works with any SATA hard drive from 80GB to 500GB. The USB 2.0 to IDE or SATA Drive adapter can handle all sizes and types of mass storage drives making this a great solution for recovering personal files from IDE or SATA drives that no longer boot the operating system. Features Connectors: Input: USB A male port. Outputs: One IDC 40pin female port for 3.5 and 5.25 drives one IDC 44pin female port for 2.5 drives and one 7pin female SATA port for SATA drives. Fully compliant with both the Standard Specification of USB 2.0 and USB 1.1. HighSpeed up to 480 Mbps data transfer rate. Integrated USB Transceiver. Supports USB Suspend/Resume and Remote Wakeup. Included 5V;1A power supply supports both SATA power and the standard 4pin molex power connectors. On/Off switch on power supply lets you shut off attached drive without having to disconnect when not in use. |